测量应用报告
测量应用报告 是由独立撰稿人撰写的关于测量技术和应用的科技杂志.
RAM 成立时间是上世纪60年代.
它是由德国 Chemnitz 大学机械学院的 Dr. Martin Stockmann 博士负责编写的. 每年两期，有英文和德文版本，并通过 HBM 网站发布.
The measurement instrumentation of MV "Polarstern" for an icebreaking expedition
The design of the vessel, as well as the local hull construction of an icebreaking ship is largely based on empirical data obtained from vessels operating in the Baltic Sea.
Precision force transducer for international comparison measurements on force standard machines
International comparison measurements performed on the force standard machines of national metrological institutes require standards in the form of force transducers which must possess qualities that can satisfy the very highest...
Pressure measurement in the study of an aerodynamic window for high-energy lasers
The beam from a high-energy laser must be emitted through a special window which shields the laser cavity from the surrounding atmosphere.
Portable force measurement device for preventive maintenance on injection molding machines
Injection molding machines can produce waste when both halves of the mold are not parallelly closed.
Forces in the railway track structure on the Olifants River Bridge
The Olifants River Bridge is unique in that it carries continuously welded rails over its entire length of 1035 m (3396 ft).
A new versatile measurement amplifier
The alpha 3000 system is a new versatile integrated measuring amplifier system for the electrical measurement of mechanical quantities which can be operated in manual digital or computer compatible form.
Wheelchairs in stress: Measurement of wheelchair characteristics
An ergonomic study of manual wheelchairs is being undertaken under the sponsorship of the West German Government.
Measuring force and torque in the weir drive system of the Iffezheim Dam
The Iffezheim Dam was built as a combined Franco-German project following the agreement concluded between the two countries in 1969 concerning the widening of the River Rhine.
Determining torsional and flexural stiffnes in car bodies
Despite the existence of mature theoretical computational techniques in the development of car bodies for passenger vehicles, experimental testing of the actual behavior cannot be abandoned.
Main metrological characteristics of IMGC six-component dynamometer
The results of intercomparisons of force standards between several european countries has uncovered uncertainties higher than can be expected.
