MVD2510 - Control panel measuring amplifier for process control
The MVD 2510 is tailor-made for applications in industrial weighing with strain-gage load cells and which are not subject to official calibration. Typical examples are container and silo weighing as well as gravimetric level measurement.
The MVD 2510 can supply up to four load cells connected in parallel. Apart from the high quality DC amplifier, the instrument also has a digital filter which, with 0.05Hz, effectively suppresses even low frequency container vibrations. Two limit switches are available for supervisory functions which, for example, enable overflow monitoring or a simple dosage control to be provided. The freely scaleable analog output offers further ways of obtaining individualised signal conditioning.
- For weighing applications, e.g. for container and silo weighing
- DC amplifier for strain-gauge full bridges from 80...5000ohm
- Easy operation via rugged, industrial keyboard
- 4 1/2 figure LED display with various special characters
- Auto-tare function
- 2 limit switches
- Scalable analog output (+/-10 V, +/-20 mA, 4...20 mA)
In addition to the industrial amplifiers HBM provides the appropriate ePLAN macros. They allow easy and error-free integration of the instruments in the project planning of the automation environment.
ePLAN Electric P8 is an engineering tool for modern CAE software supported by a database and facilitates consistent project planning, documentation and administration of automation systems. ePLAN macros enable users to easily integrate the process controllers in their project planning. Parts data, drawings and pin assignments are available in ePLAN Electric P8 immediately after import of the macros.
The free macros are available on the documentation CD included in the process controllers' scope of supply and can also be downloaded here.
Please enter your email address.
Product Data Sheet & Literature
|CE-Declaration of Conformity|
Candid data sheets: We keep our promises.
Precision in series: This also applies to the accuracy of the values specified in our data sheets. Ideal conditions can often be theoretically attained based on the values given, but our data sheets focus on realistic standard assumptions - such as those likely to be encountered in your application. Therefore, please consider this when comparing our data sheets with those of other manufacturers.
This is a guide to create a CODESYS application for PMX from HBM.
This is an instruction for creating a tolerance-window in the PMX that can be used for a component or performance test for example.
Torque measurement plays an important role in engine test benches. Read this technical article describing how to implement efficient control and automation, in addition to maximum accuracy and speed.
HBM force transducers are applied in a research project to reduce vibration in ultra-light belt conveyor galleries. Read this case study to learn more about the project - from the model to full implementation.
Ricoh UK Products Ltd has worked with Mechatronic Solutions and HBM in developing a one-piece assurance system for the automatic assembly of its latest toner product for the European market.
Component parts in rolling mills are subjected to high stress. If e.g. bearings wear out prematurely, product quality decreases. Since this happened at a manufacturer of aluminum products, SKF decided to use HBM's PMX amplifier...
Modern smartphones and operating units provide fascinating new features and user friendly design. But these devices must pass through an extensive development and testing process before they ever reach consumers.
Switching on and off reliably – over the entire service life of a switching device. Guaranteeing this is the task of end-of-line test benches in switching device manufacturing.
Modern industrial production would be unthinkable without presses. The range of products extends from coins to large automotibile parts. Presses run at up to 800 strokes per minute. The quality of the workpieces that are produced...
Depending on the final product, steel must be available in a special shape, alloy and quality. The quality of the outgoing products, sheet steel, is largely determined in production.