GEN7t Data Acquisition Systems

GEN7t - Transient Recorder and Data Acquisition System

GEN7t is a robust portable transient recorder and data acquisition system and part of the proven GEN DAQ series data acquisition systems. GEN7t offers 7 slots for GEN DAQ acquisition cards and accepts any mix of them. GEN7t is configured and controlled using Perception software. This combination results in a sophisticated instrument for ultra-fast recording, analysis and reporting.

Product Description

GEN7t comes with a high-speed standard 1 Gbit Ethernet interface capable of streaming recorded data directly to the PC at data rates up to 100 MB/s. Optional 1 Gbit Optical Ethernet allows isolated control of the mainframe as well as cable lengths up to 10 km while maintaining the full streaming performance.

The optional 10 Gbit optical Ethernet interface raises the streaming rate to 200 MB/s to allow higher streaming speed. When more reliable or distributed storage of recorded data is required the GEN7t mainframe supports a built-in Solid State Disk or can directly store recorded data on a Network Attached Storage (NAS) device.

To synchronize the absolute time to other systems the GEN7t supports the optional IRIG and IRIG/GPS card while synchronizing multiple GEN DAQ systems can be done using the optional Master/Slave card.

GEN DAQ Acquisition Cards

Bridge ISO 200 kS/s Input Card (GN410)

The Bridge ISO 200 kS/s Input Card supports quarter, half and full bridges with constant voltage or constant current excitation. In sensor mode, string pots, PT100 and other voltage or current excited sensors can be used. The maximum sample rate is 200 kS/s per channel.

View full product details

Bridge ISO 1 MS/s Input Card (GN411)

The Bridge ISO 1 MS/s Input Card supports quarter, half and full bridges with constant voltage or constant current excitation. In sensor mode, string pots, PT100 and other voltage or current excited sensors can be used. The maximum sample rate is 1 MS/s per channel.

View full product details

High-Speed 100 MS/s Input Card (GN412)

For ultra-fast signals, the High-Speed 100 MS/s Input Card is equipped with four channels sampling at incredibly high speed. The maximum sample rate is 100 MS/s per channel.

View full product details

High-Speed 25 MS/s Input Card (GN413)

For ultra-fast signals, the High-Speed 25 MS/s Input Card is equipped with four channels sampling at incredibly high speed.The maximum sample rate is 25 MS/s per channel.

View full product details

Universal ISO 200 kS/s Input Card (GN440)

The Universal ISO 200 kS/s Input Card with fast amplifier serves a variety of needs; from differential and/or isolated measurements to IEPE-based vibration or shunt-based current measurements. The maximum sample rate is 200 kS/s per channel.

View full product details

Universal ISO 1 MS/s Input Card (GN441)

The Universal ISO 1 MS/s Input Card with fast amplifier serves a variety of needs; from differential and/or isolated measurements to IEPE-based vibration or shunt-based current measurements. The maximum sample rate is 1 MS/s per channel.

View full product details

High-Voltage ISO 2 MS/s Input Card (GN610)

The isolated balanced differential inputs allow direct connection to any voltage up to 600 V RMS CAT II on both inputs of each channel. The signal conditioner provides voltage inputs from ± 20 mV to ± 1000 V combining low and high voltage input ranges all in one card. The model uses two 4 mm safety banana plugs for each channel. The maximum sample rate is 2 MS/s per channel.

View full product details

High-Voltage ISO 200 kS/s Input Card (GN611)

The isolated balanced differential inputs allow direct connection to any voltage up to 600 V RMS CAT II on both inputs of each channel. The signal conditioner provides voltage inputs from ± 20 mV to ± 1000 V combining low and high voltage input ranges all in one card. The model uses two 4 mm safety banana plugs for each channel. The maximum sample rate is 200 kS/s per channel.

View full product details

Basic/IEPE ISO 2 MS/s Input Card (GN815)

The GEN DAQ Basic/IEPE ISO 2 MS/s Input Card is a general purpose signal conditioner for use with voltage inputs, externally conditioned signals or probes and current clamps. This card also supports IEPE transducers and TEDS class 1 for easy setup of the acquisition channels.

View full product details

Basic/IEPE ISO 200 kS/s Input Card (GEN816)

The GEN DAQ Basic/IEPE ISO 200 kS/s Input Card is a general purpose signal conditioner for use with voltage inputs, externally conditioned signals or probes and current clamps. This card also supports IEPE transducers and TEDS class 1 for easy setup of the acquisition channels.

View full product details

16/32-Channel Accel 250 kS/s Input Card (GN1610 and GN3210)

In Accelerometer mode, they offer excellent price/performance inputs for an array of IEPE based sensors (accelerometers, microphones, etc.). In Charge mode they can be used directly with charge type sensors e.g. piezoelectric accelerometers or pressure transducers. Furthermore they can be used as entry level electrical input amplifiers to measure electrical signals, for example (voltage drops over shunts). The maximum sample rate is 250 kS/s per channel.

View full product details

16/32-Channel Basic 20 kS/s Input Card (GN1611 and GN3211)

As a differential amplifier, these cards can be used in electrically noisy environments. They can be used as entry level electrical input amplifiers to measure electrical signals (voltage drops over shunts). As a single ended amplifier these cards can serve as a cost effective coupler input for preconditioned signals to be recorded. The maximum sample rate is 20 kS/s per channel.

View full product details

Digital/ Fiber Optical 1 MS/s Input Card (GN4070)

It enables to record up to 32 binary input channels (marker channels) as well as 8 digital event signals that are optically isolated with up to 1 MS/s per channel. Although general purpose, this board is specifically suited for the high power/high voltage market.

View full product details

Digital 1 MS/s Input Card (GN6470)

It enables to record up to 64 binary input channels (marker channels) with up to 1 MS/s per channel. In addition 9 binary input channels can be assigned under software control to provide 3 channels of counter/timer functionality.

View full product details

Product Literature

Please enter your email address.

If you already have an account with HBM.com, log in here using your email address to get unlimited access to HBM's complete technical documentation.

Product Literature

GEN7t

Data Sheets

ENDEESFRITPTCNJPKRRU
Data Sheet Please Log InPlease Log InPlease Log InPlease Log In

Data Sheet for Power Products

ENDEESFRITPTCNJPKRRU
6600 Isolated Digitizer Please Log In
7600 Isolated Digitizer Please Log In
HV Impulse Attenuator Please Log In

Operating Manuals

ENDEESFRITPTCNJPKRRU
Operating Manual 6600 Isolated Digitizer Please Log In
Operating Manual 7600 Isolated Digitizer Please Log In
Operating Manual Data Acquisition System Please Log In
Operating Manual HV Impulse Attenuator Please Log In
User Manual Master-Slave Operation Please Log In

Calibration Kits

ENDEESFRITPTCNJPKRRU
Calibration Kit Please Log In
User Manual - Calibration and Verification Software Please Log In

Brochures

ENDEESFRITPTCNJPKRRU
Brochure GEN7t / GEN16t Please Log In
Brochure Product Family Please Log InPlease Log InPlease Log InPlease Log InPlease Log InPlease Log InPlease Log In

Certificates

ENDEESFRITPTCNJPKRRU
CE-Certificate 273 - Listing of the Types Please Log InPlease Log In
Declaration of Conformity Please Log InPlease Log InPlease Log In

Candid data sheets: We keep our promises.

Precision in series: This also applies to the accuracy of the values specified in our data sheets. Ideal conditions can often be theoretically attained based on the values given, but our data sheets focus on realistic standard assumptions - such as those likely to be encountered in your application. Therefore, please consider this when comparing our data sheets with those of other manufacturers.

Case Studies on GEN7t

Charpy test: Politecnico di Milano relies on HBM equipment for high speed data acquisition

Italian researchers have selected HBM’s GEN7t high-speed equipment to improve the reliability and accuracy of data acquisition on Charpy tests.

Underwater blasting project meets stringent safety limits with HBM’s Genesis equipment

Two US contractors have used HBM's Genesis high-speed data acquisition equipment to successfully monitor the underwater blasting of a one-mile long, environmentally-sensitive section of the Columbia River near St Helens in...

Advanced lightning warning system protects spacecraft launches at Kennedy Space Center

Using HBM transient recorders and digitizers, HBM has designed a lightning monitoring system for Kennedy Space Center in Florida. The system enhances the safety of operations such as the launching of rockets by ensuring that the...

Request a Quote for GEN7t

Request a Quote for GEN7t

Thank you for your interest in HBM. Please complete the form below and an HBM representative will respond shortly.


Key Features

  • Standalone desktop mainframe
  • Seven slots for acquisition cards
  • Accepts any mix of GEN DAQ acquisition cards
  • Up to 224 analog channels
  • 100 MB/s continuous streaming rate
  • 1 GBit optical Ethernet
  • 10 Gbit optical Ethernet with 200 MB/s continuous streaming rate
  • IRIG/GPS time synchronization
  • Master/Slave synchronization

Compatibility with third party software

HBM DAQ systems can be integrated with 3rd party software or customized applications.

Click here to read more