HBM Webinars

Please log-in below to view our webinars.

HBM Webinar - Good Data Gone Bad

View this this informative webinar to learn why it is important to recognize bad engineering data before using it for durability and performance analysis.
 
Collecting good time series data is not a trivial task. This presentation will shed some light on causes and examples of bad data, and what separates good data from bad data. We will explain ways to recognize bad data, and suggest best testing and analysis practices to ensure the best possible engineering decisions are being made.

Speaker: Kurt Munson, Engineering Manager, HBM-nCode

The original webinar was held on May 2, 2013

Please note that the seminar is hosted by our partner NASA Tech Briefs.

A free registration on the NASA Tech Brief website is required to view the webinar.

View Webinar: Good Data Gone Bad

HBM Webinar: Types of Amplifier ADCs

This webinar covers the pros and cons of different types of amplifier ADCs (analog to digital convertors). Delta-Sigma, Flash and Successive Approximation types are discussed. The webinar also covers digitizing time-dependent signals.

The original webinar was held on March 28th 2013.

HBM Webinar: Simplifying Large Channel Count DAQ Systems

Fast and easy configuration for large channel count DAQ-systems is a big challenge. Users typically want to reduce setup times and increase the time available for testing. This webinar will explore different workflows for the configuration and share ways to simplify the process.

The original webinar was held on February 25th 2013.

HBM Webinar - Selecting the right filter for your application

Filters are part of the signal path when acquiring data. Knowing what filters are available and how they will affect your data will make it easier for you properly prepare and make your measurements. The key is to provide valid input to output data over the frequency range that you are interested in. Anti-aliasing filters and signal filters are useful but there are pros & cons that need to be considered before using them.

The original webinar was held on December 19th 2012.

HBM Webinar - Measurement Cables and Shielding

What is the purpose of measurement cables? Measurement cables provide connection between the sensor and amplifier for excitation voltage and measurement signals. Improper measurement cable practices can result in erroneous measurements caused by interference noise. Learn measurement cable shielding best practices in this webinar.

The original webinar was held on September 12th 2012.

HBM Webinar - Choosing the right DAQ amplifier for your application

An amplifier can enable a great measurement or cause havoc for the measurement or even an unsafe condition for the user. Ensure your next measurement is safe, reliable, and accurate by choosing the right DAQ amplifier and by addressing some of the more common measurement parameters!

In this webinar you will learn when it is necessary to use isolated amplifiers and the differences between balanced versus unbalanced, symmetrical versus unsymmetrical and differential versus single-ended amplifiers.

The original webinar was held on July 31st 2012.

HBM Webinar - Torque Measurement Uncertainty

Do you trust your torque readings? Without knowing the measurement uncertainty of your application, the measured value is of no value. The linearity, hysteresis or the accuracy class given by the manufacturer may not be sufficient. We’ll discuss how to take into account more of the possible influences acting in your application like temperature, off axis loading and more so you can be sure to have an accurate measurement.

The original webinar was held on June 26th 2012.

Please log-in below to view our webinars.

HBM Webinar: Dynamometer Engine Testing

Dynamometers are widely used for engine and power train research and development. The most common tests performed are steady state tests, sweep tests and transient tests. This webinar discusses how to perform engine testing for various applications using HBM data acquisition hardware QuantumX and D2T automation software Morphee.

The combination of these allows the user to add an unlimited number of measurements on the fly for data acquisition, automation and control. With an open platform this solution lets the user modify and customize the testing needs for their desired application including real-time data acquisition in an easy, accessible package!

The original webinar was held on May 14^th, 2013.

HBM Webinar - Critical Elements to Consider in Choosing Strain Gages for Sensor Design

Join us in this informative webinar and learn the key elements to consider when selecting strain gages for your sensor design. This free, 60-minute webinar will help you gain a comprehensive understanding of choosing strain gages based on your:

• Basic review of strain-gage operation
• Applications
• Automotive, robotic and medical sensors
• Environment
• Expected strain levels
• Installation methods
• And much more

This webinar will also cover key considerations in creating a custom sensor if and when you encounter space constraints. You will learn there are possibilities of creating a sensor from an existing component of your assembly.

Speaker: John Pacheco, Product Development Engineer, HBM

The original webinar was held on March 21, 2013.

Please note that the seminar is hosted by our partner Machine Design.

A free registration on the Machine Design website is required to view the webinar.

View Webinar: Critical Elements to Consider in Choosing Strain Gages for Sensor Design.

HBM Webinar: How to Make Safe and Accurate High Power Measurements

Learn the key factors to ensure a safe, accurate and reliable high power measurement. Lightning impulse testing and switchgear testing are just a couple of challenging high power measurement examples that involve working with intense electric and magnetic fields.  Learn how to make accurate and reliable high power measurements per industry standards while ensuring the safety of users and equipment.

The original webinar was held on April 3rd 2013.

HBM Webinar - Efficiency Testing on Electrical Drive Trains

Continuous and synchronous acquisition of electrical and mechanical power. Beyond the numbers a traditional power meter computes, the GEN DAQ based eDrive test solution from HBM also delivers raw data. The HBM solution allows in-detailed analysis and result verification in demanding motor / inverter test setups.

The original webinar was held on November 28th 2012.

HBM Webinar - From Strain to Report: Using Strain Gages to do Experimental Stress Analysis

This webinar will define experimental stress analysis and explore some example applications. It will look in detail at the full measurement chain used in stress analysis applications: selecting a strain gauge, connecting the strain gauge (2, 3 or 4 wire), setting up an amplifier to record the strain signal and the software to use to analyze and display the results.

The original webinar was held on January 22nd 2013.

Please log-in below to view our webinars.

HBM Webinar - Critical Elements to Consider in Choosing Strain Gages for Sensor Design

Join us in this informative webinar and learn the key elements to consider when selecting strain gages for your sensor design. This free, 60-minute webinar will help you gain a comprehensive understanding of choosing strain gages based on your:

• Basic review of strain-gage operation
• Applications
• Automotive, robotic and medical sensors
• Environment
• Expected strain levels
• Installation methods
• And much more

This webinar will also cover key considerations in creating a custom sensor if and when you encounter space constraints. You will learn there are possibilities of creating a sensor from an existing component of your assembly.

Speaker: John Pacheco, Product Development Engineer, HBM

The original webinar was held on March 21, 2013.

Please note that the seminar is hosted by our partner Machine Design.

A free registration on the Machine Design website is required to view the webinar.

View Webinar: Critical Elements to Consider in Choosing Strain Gages for Sensor Design.

HBM Webinar - From Strain to Report: Using Strain Gages to do Experimental Stress Analysis

This webinar will define experimental stress analysis and explore some example applications. It will look in detail at the full measurement chain used in stress analysis applications: selecting a strain gauge, connecting the strain gauge (2, 3 or 4 wire), setting up an amplifier to record the strain signal and the software to use to analyze and display the results.

The original webinar was held on January 22nd 2013.

HBM Webinar - Critical Elements to Consider in Choosing Strain Gages

Join us in this informative webinar to help get you started with the key elements to consider when selecting strain gauges for your applications. Whether you are involved in stress analysis or sensor design, this free, 30-minute webinar will help guide you in the right direction when choosing strain gauges based on your application, environment and expected strain levels. In addition, you will gain a better understanding of the installation methods used and what you should consider before attempting to tackle this project yourself.

This webinar will also cover key considerations in creating a custom sensor if space constraints in your product or system optimization requirement make such a solution a preferred path.

Join us and be on your way to a more reliable and accurate sensing solution by selecting the right strain gauges.

Speaker: Randy Hopkins, Sensor Business Director, HBM

The original webinar was held on October 16th 2012.

Please note that the seminar is hosted by our partner NASA Tech Briefs.

A free registration on NASA Tech Briefs website is required to view the webinar.

View Webinar: Critical Elements to Consider in Choosing Strain Gages

HBM Webinar - Understanding the Benefits of Strain Gauge Technology in OEM Medical Devices

This webinar provides an overview of strain gauge technology and its applications within medical device and equipment manufacturing.  It explains the typical process by which this technology is applied to medical device designs and offers examples of device improvements achieved.

The original webinar was held on December 5th 2012.

HBM Webinar - How to work with strain gages in catmanAP?

Setting up strain gauge rosettes with catmanAP data acquisition software, using a QuantumX MX1615 data acquisition system.

HBM Webinar - Introduction to Strain Gauges

Beginning in the 1930's, mechanical engineers have used strain gauges to test theoretical models and the mechanical stability of their designs and since the 1950's, HBM has been one of the world's leading designers and manufacturers of strain gauges. One of HBM's objectives is to simplify the user's task by providing strain gauges and accessories appropriate to your application.

The original webinar was held on September 27th 2012.

Please log-in below to view our webinars.

HBM Webinar: How to Select a Rotating Torque Sensor

This webinar discusses information a user should consider when selecting a rotating torque sensor. We consider application requirements, dynamic and dimensional considerations, budget factors and available alternatives.

The original webinar was held on May 7^th, 2013.

HBM's T12 Assistant

Have you wondered why HBM calls the T12 "smart torque"? Join us to review the capabilities of the T12 Assistant which provides you the means to set up ideal torque measurements with your HBM T12 torque transducer. This webinar will review how to create and view settings such as rescaling a secondary torque signal at a smaller torque range to provide better resolution, signal filtering, reading rotor extremes, and creating user selectable T12 parameter sets.

The original webinar was held on October 9th 2012.

HBM Webinar - Torque Measurement Uncertainty

Do you trust your torque readings? Without knowing the measurement uncertainty of your application, the measured value is of no value. The linearity, hysteresis or the accuracy class given by the manufacturer may not be sufficient. We’ll discuss how to take into account more of the possible influences acting in your application like temperature, off axis loading and more so you can be sure to have an accurate measurement.

The original webinar was held on June 26th 2012.

Please log-in below to view our webinars.

HBM Webinar: Measure, Control and Connect with PMX

Learn how to perform measurement-centric control and data management for process monitoring, condition monitoring and end of line testing on industrial test rigs. PMX combines superior measurement reliability, tailored control function blocks and universal automation integration to deliver a user-friendly interface for operators, lower risk for engineers and higher productivity for your company. Join us to learn more about the unique qualities of PMX and what it can do for you.

The original webinar was held on April 24^th, 2013.

HBM Webinar - The QuantumX MX1615: A Universal Bridge Amplifier

The QuantumX MX1615 strain gauge bridge amplifier enables up to 16 sensors or strain gauges (SG) in full-, half- or quarter-bridge configuration to be connected by DC or AC excitation. Only one module is required to measure all mechanical quantities. Ideal for experimental stress analysis, the MX1615 offers unrivaled channel density and allows full integration into the modular data acquisition system. In this webinar, learn how to make better measurements in the presence of temperature variation, mounting irregularities & electromagnetic interference.

The original webinar was held on January 15th 2013.

HBM Webinar - How to work with strain gages in catmanAP?

Setting up strain gauge rosettes with catmanAP data acquisition software, using a QuantumX MX1615 data acquisition system.

HBM Webinar - catman’s Transducer Database

catman Easy’s sensor database will help you save test setup time and money. This webinar will show you how your commonly used sensor settings can be stored in the database and assigned to your test with a click of a mouse. The sensor database stores calibration, sensitivities and sensor information for all your tests.

The original webinar was held on August 14th 2012.

HBM Webinar: Simplifying Large Channel Count DAQ Systems

Fast and easy configuration for large channel count DAQ-systems is a big challenge. Users typically want to reduce setup times and increase the time available for testing. This webinar will explore different workflows for the configuration and share ways to simplify the process.

The original webinar was held on February 25th 2013.

Please log-in below to view our webinars.

HBM Webinar - How to Setup and Optimize the eDAQ Video Feature

Have you ever run a test and wondered what caused the data anomaly in the middle of the test? While the data reflects changes in the equipment, what was physically happening with the test object that caused those results? By integrating eDAQ video into your test, you can answer those questions.
This webinar will demonstrate integrating video into your eDAQ data files. We will review the process of setup, video recording and playback using current products. Additionally we will discuss best practices to ensure your data and the accompanying video meet your expectations.

The original webinar was held on May 21, 2013

HBM Webinar: SoMat eDAQ Common Field Problems and Solutions

Historically the testing season for eDAQ customers picks up in the spring due to the large agricultural and construction equipment markets that we serve. While testing is done in many locations year round the spring stills bring an increase of technical problems encountered in the field. The purpose of this webinar is to make our customers aware of common problems occurring in the field and methods to isolate and correct them as quickly as possible without a significant loss of testing time.

The original webinar was held on March 19th 2013.

HBM Webinar: Acquiring and Interpreting CAN message data with Somat eDAQ hardware

This webinar will provide a brief overview of the CAN communication protocol. We will look at how the Somat eDAQ can be used to record and interpret CAN message data.

The original webinar was held on February 12th 2013.

HBM Webinar - TCE Enhancements and eDAQ Updates

With the introduction of the Bridge Layer (BRG and EBRG) and customer requests, there have been numerous enhancements to TCE. This seminar will cover the enhancements made to TCE since version 11. Join us to learn about new features you may not have discovered yet.

The original webinar was held on October 31st 2012.

HBM Webinar - Precision GPS Receiver for eDAQ

This webinar will introduce the Somat EGPS200 which provides a robust 200 Hz speed update rate. We will cover the technical capabilities and benefits of using the EGPS200, as well as how to connect and use the device with the Somat eDAQ systems. We will also provide insight into using the device for applications such as brake testing.

The original webinar was held on August 28th 2012.

Please log-in below to view our webinars.

HBM Webinar: How to Make Safe and Accurate High Power Measurements

Learn the key factors to ensure a safe, accurate and reliable high power measurement. Lightning impulse testing and switchgear testing are just a couple of challenging high power measurement examples that involve working with intense electric and magnetic fields.  Learn how to make accurate and reliable high power measurements per industry standards while ensuring the safety of users and equipment.

The original webinar was held on April 3rd 2013.

HBM Webinar - Efficiency Testing on Electrical Drive Trains

Continuous and synchronous acquisition of electrical and mechanical power. Beyond the numbers a traditional power meter computes, the GEN DAQ based eDrive test solution from HBM also delivers raw data. The HBM solution allows in-detailed analysis and result verification in demanding motor / inverter test setups.

The original webinar was held on November 28th 2012.

HBM Webinar - Perception 6.30 and the new GEN Series 1kV Module

This webinar shares information about the new GEN series 1kV module.  We are  also reviewing the new features in Perception 6.30 such as the sensor database option, local storage using iSCSI, the function creation wizard, new cycle math functions and much more.

The original webinar was held on November 15th 2012.

HBM Webinar - What's New in Perception?

Simplify your daily work! Learn about the newest software features and options that have been added to Perception. Many of the new features and improvements are available in standard Perception.

The original webinar was held on July 17th 2012.