Exemples de mesures appliquées
Les Reports in Applied Measurement (exemples de mesures appliquées) est un journal détaillée sur les techniques de mesure constitué d'articles soumis par des auteurs indépendants.
RAM est une longue tradition sur les expériences réalisées depuis le milieu des années 60.
Il est édité par Dr. Martin Stockmann de l'Institut de Mécanique à l'université de Chemnitz en Allemagne. Cet édito est semestriel, il est publié en anglais et Allemand exclusivement sur notre site Internet.
Control of the retarders on the sorting sidings at Offenburg marshalling yard using pressure transducers
The article describes this process using the marshalling yard at Offenburg as an example.
Measurement verification f the stress reduction on a water vessel by shape modification of a welded part
Shortly before finalizing inspection, a problem was found on the internal wall of a feed water tank at a power station.
Computer controlled receiving and discharge weighing system for grain
The article describes the implementation of this type of system and deals with the weigher control and data processing.
Measurements made during the restoration of a tower on a Middle-Age castle
The structural state of the Runneburg in Thuringia, which is one of the most significant remaining romantic, secular buildings in central Germany, requires immediate and comprehensive restoration work.
Monitoring the weight of the Sphinx lift at the "Top of Europe"
In this article the author describes how a warning and overload inhibit system was installed by using a strain transducer mounted on the cabin to give a measurement signal proportional to the cabin load.
Measurement of forces in a rock-wool hardening oven at 230 °C
The article deals with important details of the transducer design, including the temperature compensation and calibration.
Investigating the relative movements of wheel-hub seals on heavy trucks and trailers
The performance of wheel bearings on heavy goods vehicles is significantly dependent on the oil bath seals located in the bearings between the wheel-hub and axle spindle.
Displacement measurements on a Middle Age manuscript and their correlation with resulting surface damage
This article describes the examination that was carried out involving displacement and acceleration measurements.
Elastic deformation measurements in the ice shelf at the Georg von Neumayer Station in Antarctica
This article describes measurements carried out for a pilot project by a team of women scientists and engineers who spent the winter of 1990/91 at the station.
Testing the spring force of hose-bands used in the car industry
Japanese car makers have long since realized the benefits of using spring-type hose-bands instead of the screw-clamp versions for hose connections.
