Exemples de mesures appliquées
Les Reports in Applied Measurement (exemples de mesures appliquées) est un journal détaillée sur les techniques de mesure constitué d'articles soumis par des auteurs indépendants.
RAM est une longue tradition sur les expériences réalisées depuis le milieu des années 60.
Il est édité par Dr. Martin Stockmann de l'Institut de Mécanique à l'université de Chemnitz en Allemagne. Cet édito est semestriel, il est publié en anglais et Allemand exclusivement sur notre site Internet.
Strain gages as sensors for controlling the manipulative robot hand OEDIPUS
The article describes the complete project including the force control and gives details of the arrangement and wiring of the strain gages on the elements.
Torque tests on car locking devices fitted with anti-theft systems
Cars are now being fitted to an increasing extent with central locking devices with integral anti-theft systems.
Test-rig for the determination of coefficients of sliding friction under the influence of abrasive intermediate materials
This article describes the development of a test-rig in which these parameters can be investigated under realistic simulated conditions, taking into account the effect of various abrasive materials.
Measuring masticatory forces with strain gages
This article deals with the forces involved in the chewing action in humans.
Instrumentation for monitoring the structural integrity of offshore jacket platforms
Any method of independently assessing the structural integrity of offshore platforms will be welcomed by the operators and owners of the platforms since the integrity of these structures is presently assessed by diving...
Stresses on sailing yachts at sea
This article describes load measurements taken on a number of yachts with lengths between 8.6 m and 35 m.
Monitoring the stress in the deck of an oil tanker
Taking the world as a whole, shipping losses average about one ship lost every three weeks and although this figure is relatively small compared with the number of ships operating, it is still a significant loss to the insurers.
Measurement of deformation on an experimental injection mold tool
The authors describe a way of checking the model upon which the computeraided tool design is based.
Efficiency measurements on hypoid gears used in car axle drives
The author of this article describes a way of accurately measuring the efficiency of car axle drives.
Measurements on the drive of a solar-powered commercial vehicle
The article describes measurements made on a solar powered vehicle as a contribution to this optimization process.
