T10F Torque Sensor

T10F - Torque Meter with Extremely Short Design

The T10F torque meter is the first torque meter representative. The T10F uses shear stress as a measure of torque for the first time, a measurement principle for which HBM applied for patent.

Product Description

Its extremely short design takes up less space in the test rig and thus saves money. The high lateral stiffness allows articulated shafts to be directly flange-connected and additional support bearings are not normally required. The high permissible dynamic loading requires less over-dimensioning for dynamic measurement, its very high torsional stiffness virtually eliminates the problem of torque sympathetic vibrations, depending on the application.

Because there are no bearings or slip-rings, there are no maintenance costs involved in this system of torque measurement. Thanks to the modular structure there are a large number of mechatronic variants, making it possible for you to choose the correct torque flange for your particular application. Specifically coordinated and tested couplings.

Product Literature

Voer hier uw e-mailadres in.

Heeft u al een een account bij HBM.com? Log dan hier in met uw e-mailadres en u krijgt toegang tot de complete technische documentatie van HBM.

Product Literature

Data Sheet Please Log InPlease Log InPlease Log InPlease Log InPlease Log In
Montagehandleiding Please Log InPlease Log InPlease Log InPlease Log In
Couplings Please Log InPlease Log InPlease Log InPlease Log In
CE-Declaration of Conformity Please Log InPlease Log InPlease Log In

Eerlijke data sheets: Wij doen wat we beloven

Precisie in serieproductie: dit geldt ook voor de juistheid van de waarden zoals vermeld in onze data sheets.
Ideale omstandigheden kunnen theoretisch dan wel worden bereikt, maar onze data sheets zijn gericht op realistische omstandigheden - zoals u ze dus zult tegenkomen in uw eigen toepassing.
Houd hier aub rekening mee wanneer u onze data sheets met die van andere producenten vergelijkt.

Case Study on T10F

HBM on the test bench: Allison Transmission puts HBM to the test

Allison primarily uses HBM products to handle dynamometer driveline torque and speed measurements for hybrid electric development, powertrain development test stands. They currently use the T10F torque flange, T32 FNA torque...

T10F Torque transducer ensures optimization of INVT control algorithm

The Chinese company, INVT, has utilized HBM’s T10F torque transducer and MP60 amplifiers to measure torque and speed of an electric motor controlled by a variable frequency drive (VFD) in order to optimize performance.

Request a Quote for T10F

Vraag, geheel vrijblijvend, een offerte aan voor: T10F

Bedankt voor uw interesse in HBM. Met dit formulier kunt u in een muisklik uw offerte aanvragen.

T10F Key Features

  • Nominal (rated) torques of 50 N·m, 100 N·m, 200 N·m; 500 N·m, 1 kN·m, 2 kN·m, 3 kN·m, 5 kN·m and 10 kN·m
  • Nominal (rated) rotation speeds of 8,000 rpm to 15,000 rpm
  • Extremely short design
  • High permissible dynamic loading
  • High permissible transverse forces and bending moments
  • Extremely high torsional stiffness
  • No bearings, no slip rings
  • Retrievable calibration signals
  • Integrated rotation speed measurement (option)
  • Optional: Integrated optical speed measuring system
  • Optional: couplings