Vergaar waardevolle know-how tijdens de HBM Academy seminars en workshops

Vakkundige docenten, praktijk gerichte know-how, veelzijdige applicaties: Meetkundige ingenieurs over de gehele wereld waarderen de seminars en workshops van de HBM Academy.

Ook u kunt profiteren van de vele verschillende seminars, u aangeboden door de HBM Academy. Ze bevatten alle aspecten van de data-acquisitie, rekstrookmeting en de professionele analyse van meetgegevens.

Breng uw meettechnologische kennis up to date met een professionele training die bestaat uit de perfecte mix van goede basiskennis en practische begeleiding.

Alle Seminare der HBM Academy in Deutschland

Titel Datum Vrije Plaatsen Plaats
Arbeiten mit der Messdaten Erfassungs- und Auswerte-Software “Perception“ zal worden aangekondigd      nach Vereinbarung
Messdatenerfassung – die Parameter richtig setzen (DAQ) 28.04  –  29.04.2014      Darmstadt
Grundlagen der DMS Installation und DMS Messtechnik (DK) 06.05  –  08.05.2014      Darmstadt
Anwendertag Kräfte richtig messen   06.05.2014      Ismaning (München)
Anwendertag Drehmomentaufnehmer optimal einsetzen   07.05.2014      Ismaning (München)
Das Messverstärkersystem MGCplus richtig bedienen und einsetzen   12.05.2014      Darmstadt
Arbeiten mit catman®Easy / catman®AP 13.05  –  14.05.2014      Darmstadt
Programmieren mit catman®Easy Script 15.05  –  16.05.2014      Darmstadt
Messen mit optischen Dehnungsmessstreifen (DO)   20.05.2014      Darmstadt
Working with catman®Easy / catman®AP 21.05  –  22.05.2014      Darmstadt, Germany
Anwendertag Genesis HighSpeed und Perception-Software   21.05.2014      Ismaning (München)
Grundlagen der DMS Installation und DMS Messtechnik (DK) 02.06  –  04.06.2014      Darmstadt
The practical way to determine measurement uncertainty (MU) 03.06  –  04.06.2014      Darmstadt, Germany
Planung, Durchführung und Bewertung von Dehnungsmessungen (DM) 05.06  –  06.06.2014      Darmstadt
Arbeiten mit catman®Easy / catman®AP 24.06  –  25.06.2014      Darmstadt
Grundlagen der DMS Installation und DMS Messtechnik (DK) 01.07  –  03.07.2014      Darmstadt
Messdatenerfassung – die Parameter richtig setzen (DAQ) 08.07  –  09.07.2014      Darmstadt
Der praktische Weg zur Ermittlung der Messunsicherheit (MU) 10.07  –  11.07.2014      Darmstadt
Interaktive Datenanalyse mit nCode GlyphWorks 04.08  –  05.08.2014      Ismaning (München)
FE-basierte Fatigue-Analyse mit nCode DesignLife 06.08  –  07.08.2014      Ismaning (München)

HBM Seminars and Trainings worldwide

Titel Datum Vrije Plaatsen Plaats
How to use LABVIEW with HBM Data Acquisition Systems   06.05.2014      Online
How to Install a Torque Sensor – Tips & Tricks   20.05.2014      Online
Working with catman®Easy / catman®AP 21.05  –  22.05.2014      Darmstadt, Germany
Interactive Data Processing with nCode GlyphWorks (US) 02.06  –  03.06.2014      Southfield, MI
The practical way to determine measurement uncertainty (MU) 03.06  –  04.06.2014      Darmstadt, Germany
Practical Fatigue Theory (1-day)   04.06.2014      Southfield, MI
FE-based Fatigue Analysis with DesignLife (US) 05.06  –  06.06.2014      Southfield, MI
Perception Master Class 10.06  –  11.06.2014      Madison, WI
Strain Gage Selection and Installation Workshop 10.06  –  11.06.2014      Southfield, MI (HBM nCode Training Center)
HBM UK Workshops 11.06  –  12.06.2014      Williams Conference Centre, Grove, UK
Interactive Data Processing with nCode GlyphWorks (UK) 17.06  –  18.06.2014      Rotherham, UK
eDAQ Master Class 17.06  –  19.06.2014      Southfield, MI (HBM nCode Training Center)
Interactive Data Processing with nCode GlyphWorks (US) 08.09  –  09.09.2014      Southfield, MI
Practical Fatigue Theory (2-day) 08.09  –  09.09.2014      Test Lab, Darley Dale, UK
Practical Fatigue Theory (1-day)   10.09.2014      Southfield, MI
FE-based Fatigue Analysis with DesignLife (UK) 10.09  –  11.09.2014      Rotherham, UK
FE-based Fatigue Analysis with DesignLife (US) 11.09  –  12.09.2014      Southfield, MI
Interactive Data Processing with nCode GlyphWorks (UK) 16.09  –  17.09.2014      Rotherham, UK
Strain Gage Selection and Installation Workshop 22.09  –  23.09.2014      Southfield, MI (HBM nCode Training Center)
eDAQ Master Class 24.09  –  26.09.2014      Southfield, MI (HBM nCode Training Center)

On-Site seminars: We bring the expertise to you

Please contact the HBM Academy Team if you are interested in HBM Academy creating a on-site training seminar specifically tailored to your company's needs.

Tel. +1 800-578-4260
Fax +1 217-328-6576
Email: seminars@usa.hbm.com

HBM also offers seminars in the UK and in the U.S. through HBM-nCode.

Please click here for further information about nCode seminars.

Contact the HBM Academy Team in Germany

HBM Academy Team

Tel.: +49 6151 803 8061
Fax: +49 6151 803 692

Email: seminars@hbm.com

HBM Academy Seminars

HBM Academy measurement seminars

Attendee feedback

"The training I attended was a good mix of presentation and hands-on applications. Afterwards, I was able to setup an actual data collection system and step through the process of acquiring data. I even carried my training materials with me to the field and used them several times while performing system setup and testing."

Cody F.
John Deere
(Dubuque, Iowa)



"Very good - as a relatively new Genesis and Perception user, it was great to get a comprehensive view of all of the features and capabilities, as well as how others are using them."

Brian T.
Institute of Electrical and Electronics Engineers
(Orlando, Florida)