The PACEline CMD digital charge amplifier for piezoelectric sensors precisely measures fast force, torque and pressure signals. It is ideally suited to highly dynamic applications such as production monitoring in press processes or end-of-line testing in the automotive sector due to its very wide measurement range and fast data acquisition up to 50 kHz. PACEline CMD can be easily integrated via digital or analog interface and parameterized via Ethernet as well as Software and Adjustment Assistant.
- HBM accuracy class: 0.5
- Measurement ranges: between 50 pC and 2 million pC
- Degrees of protection: up to IP 65
PACEline CMD Videos
|CMD2000 - データシート||Japanese|
|CMD600 - Prospetto dati||Italian|
|CMD600 - データシート||Japanese|
|PACEline CMD2000 - Data Sheet||English|
|PACEline CMD2000 - Datenblatt||German|
|PACEline CMD600 /-P - Data Sheet||English|
|PACEline CMD600 /-P - Datenblatt||German|
|PACEline CMD600/ CMD600P - Caractéristiques techniques||French|
|PACEline DMD2000 - Caractéristiques techniques||French|
|CMD600 - Manuale di istruzione||Italian|
|CSB4/1 Summing Box - Operating Manual||English, German, French, Italian|
|PACEline CMD - Interface Description||English|
|PACEline CMD - Operating Manual||French, German, English|
|KAB143, KAB145, KAB176 (cables) - Data Sheet||English|
|KAB143, KAB145, KAB176 (câbles) - Caractéristiques techniques||French|
|KAB143, KAB145, KAB176 (cavi di collegamento) - Prospetto dati||Italian|
|KAB143, KAB145, KAB176 (Kabel) - Datenblatt||German|
|PACEline CMD - Safety instructions||French, German, English|
|Declaration of Conformity|
|1-KAB, K-KAB (cable)- 符合性聲明||多语言|
|CMD / CMA CE - EU Declaration of Conformity||多语言|
Archive including all current firmware for all modules of the CMD series (CMD600 and CMD2000).
Size: 248 KB
CMA/CMD CAE data for Eplan Electric P8
This project is a macro-project and contains CAE data for Eplan Electric P8.
Date: 10/2011 | Version: 1.00 | Size: 18 MB
CMD Assistant and Firmware Loader for Windows 2000, XP, Vista, 7/8/10. Allows the easy setup of CMD modules, visualization and process-data storage. All required drivers are included and will be installed during startup.
Starting with assistant-version 18.104.22.168 only CMD with firmware 3.0 and higher can be used. Devices with firmware 2.9 and lower are shown in the device-scan but marked red with a note for firmware-update. Please do also a firmware-update for those devices, for features see release-notes.
Size: 66 MB
CMD LabView driver and example project
To simplify the use of CMD meauring amplifier a complete support for communication in form of a Labview driver is available, respectively Labview programs/subroutines called virtual instruments (VIs).
The CMD driver is completely written in Labview Professional Development System. In order to use the drivers the user will need Labview version 9.0.1 or later.
Date: 07/2015 | Size: 3 MB
CMD Siemens Profinet integation example project
This is an instruction for using a CMD charge amplifier with a Siemens 1200 controller in a Profinet network.
It shows how to stream data via UDP from the charge amplifier to the controller via UDP with up to 1000 Hz and send a command via TCP.
This non-real-time communication can be performed simultaneously to an existing real-time ProfiNet connection over the same line.
Communication is done with program blocks, which are enclosed with the technote in the .scl file.
HBM does not guarantee the completeness and correctness of this example.
Date: 07/2019 | Size: 1 MB