桥路卡 200 kS/s (GN410)

GEN DAQ 桥路输入卡 ISO 200kS/s 支持带有电压和电流激励的应变信号调理器。可以使用 In sensor mode string pots, PT100 和其他电压或电流激励传感器。可提供4个通道, 从 ± 2 mV 到 ± 10 V 隔离差分输入,并带有自动清零功能。每个通道都带有独立的满量程放大器,7点贝塞尔和 Butterworth 抗混叠滤波器,16-bit 200kS/s模数转换器和多个数字滤波选项。

主板瞬态内存为 16 M (128 字节)。各通道之间内存共享。

Each channel also features two set-points for trigger or alarm purposes. Extensive acquisition and trigger modes allow many different ways to capture valuable data even at the highest sample rates. All channels are synchronously sampled at full speed without multiplexing and almost immeasurable crosstalk. The model uses standard isolated BNC connectors, whose shells are connected to isolated ground. The inputs are 10 MΩ impedance and are compatible with isolated probes and current clamps.

Key Features

  • Quarter, half and full bridge support
  • String pots, PT100 and other voltage or current excited sensors supported in sensor mode
  • 4 analog channels
  • Balanced differential inputs
  • ± 2 mV to ± 10 V input range
  • 50 V DC Isolation
  • User selectable digital Bessel and FIR filters
  • 200kS/s sample rate
  • 16 bit resolution
  • 128 MB memory
  • 16 pin LEMO for each channel

Product Literature

主题/描述 语言
技术参数表
English, German
选型手册
English
German
English
German

eDrive testing - Brochure

Italian

eDrive testing - Brochure

Chinese

eDrive testing - Brochure

Japanese

eDrive testing - Brochure

French
联系我们 如果您希望与HBM联系,无论是技术问题还是希望进行商务合作或者是产品咨询,我们都将为您服务