8或16通道高动态测量成套设备，每通道的采样率高达 500 kS/s

Update HBM approved GEN DAQ hardware peripherals. For example allowing new types of (solid state) drives.

Date: 07/2022  |  Version: 8.28.22200  |  Size: 5 MB

Update HBM approved GEN DAQ hardware peripherals. For example allowing new types of (solid state) drives.

Date: 09/2023  |  Version: 8.54.23248  |  Size: 6 MB

Perception 8.28

This is an minor release of Perception mainly improving stability, fixing known problems and adding minor new features.

This is not shipped out with the hardware but only available via web download.

Details about fixed issues and new features can be found in the release notes.

Note: Perception includes the instruments firmware for GEN DAQ systems. So there is no separate firmware available for GEN DAQ systems.

When you connect to hardware using a new version of Perception, the firmware in the hardware will be upgraded accordingly to the same release level.

Date: 07/2022  |  Version: 8.28.22200  |  Size: 602 MB

Perception 8.70

This is a major release of Perception. Due to the fixes, please download the release instead of Perception 8.64.

New Features in e-Power Suite:

• Measurement uncertainty for power and efficiency setpoint values
• Torque ripple analysis
• User-defined variable naming for ePower suite signals
• Optional analysis for harmonic active power and harmonic RMS

Improvements for Hardware:

• Support of Fusion HighSpeed Remote Probes including GN800B, P101I-4, P111I-4, P112I-4
• Fast Span Change via fieldbus Remote Control

Improvements in Perception (selected items only):

• Improvements to user-interface design
• Improved calculations when doing setpoint averaging on the mainframe

Improvements in the Perception ePower Suite (selected items only):

• Improved cycle-based recording in the ePower suite
• Context help

Support Items & Requests:

• 27 Bugs & support items were fixed and implemented

Date: 07/2024  |  Version: 8.70  |  Size: 986 MB
Related Documents: Release Notes

Perception 8.80

This is a major release of Perception. Due to the fixes, please download the release instead of older Perception versions.

New Features in e-Power Suite:

• DQ0 Transformation as optional analysis (you can find the offset-angle tool in the downloads below)
• Setpoints stored as part of a recording
• MU for setpoints supported for remote probes

New Features in Perception:

• Updated look of Acquisition Settings Page
• Allow changing CAN Message ID for acquisition state, time and latency
• Horizontal cursors added to y(t) display live view

New Support of Hardware:

• Fast Remote Probes are supported with HBK part numbers:  1-P201I-4, 1-P211I-4 & 1-P212I-4 (not supported on Gen3iA and  Gen2tB)

Support & Item Requests:

• 15 customer reported bugs were fixed

Date: 03/2025  |  Version: 8.80  |  Size: 694 MB
Related Documents: Release Notes