Get the Best Out of Your Rugged DAQ With the Right SomatXR Accessories

Supplementary SomatXR technical accessories to extend the possibilities of your data acquisition system. 
 

SomatXR EX23-R: Rugged 10-Channel Ethernet Switch With PTPv2

This Ethernet switch enables SomatXR and QuantumX modules to be connected to and synchronized with a PC or data recorder.

  • 10 Gigabit Ethernet ports (M12 x coded)
  • 5 of these ports with Power-over-Ethernet (PoE)
  • Precision Time Protocol version 2 (PTPv2)

 

Learn more HBMshop


SomatXR UPX002: Rugged Uninterruptible Power Supply (UPS)

In mobile data acquisition, measurement modules are often supplied by the vehicle battery. The UPS can be used to prevent abnormal termination of a measurement, as the result of a voltage drop or power outage.

  • Protects from voltage drops, short-term power outages, and overvoltage
  • Provides buffer for up to 80 seconds
  • Enables fast re-charging in approximately 50 seconds

 

HBMshop


Multi GNSS Receiver with USB Interface

Multi GNSS receiver (GPS, GLONASS, BEIDOU COMPASS, GALILEO, QZSS) for positioning and receiving further NMEA based data, with internal antenna on magnetic housing and max. 18 Hz update rate, 4.5 m cable length and USB 2.0 connection.

 

HBMshop


SomatXR SCM-R-SG120/350/1000: Rugged Quarter Bridge Adapter

HBM also provides an adapter for the SomatXR universal amplifiers that allows for the measurement of single strain gauges via an external quarter bridge arm in 3-wire configuration.

  • Completion of strain gauges to a full bridge
  • Versions: 120, 350 and 1000 ohms
  • Easy installation and parameterization

 

 

Article no.

SomatXR SCM-R-SG120 (120 ohm)

SomatXR SCM-R-SG350 (350 ohm)SomatXR SCM-R-SG1000 (1000 ohm)
1-SCM-R-SG120-2 1-SCM-R-SG350-2 1-SCM-R-SG1000-2
HBMshopHBMshopHBMshop

 



Questions? Contact us! We’ll be happy to advise you about the right products for your needs.

Contact us!


SomatXR SCM-R-TCK/E/J/T: Rugged Thermocouple Adapter

HBM provides four adapters with a cold junction for the SomatXR MX840B-R that allow for temperature measurement using thermocouples.

  • Type Ktype Etype J and type T versions are available
  • Locking mechanism prevents accidental separation
  • Easy installation and parameterization

 

 

Article no.

SomatXR SCM-R-TCK (type K)SomatXR SCM-R-TCE (type E)SomatXR SCM-R-TCJ (type J)SomatXR SCM-R-TCT (type T)
1-SCM-R-TCK-21-SCM-R-TCE-21-SCM-R-TCJ-21-SCM-R-TCT-2
HBMshopHBMshopHBMshopHBMshop

 


Angular FireWire and Power Supply Cables

HBM offers two new cable variants with angled connectors for FireWire and power supply. This allows setting up a centralized data acquisition system with a smaller footprint.

  • FireWire connection cable between two SomatXR or QuantumX modules with a 90° angled plug (ODU, 0.2m cable, ODU)
  • Power supply cable (ODU 90° angled plug, 5m cable, open ends) for power supply of SomatXR modules

 

 

Article no.

Angular Cable FireWireAngular Cable Power Supply
1-KAB272-W-0.21-KAB294-W-5
HBMshopHBMshop

 


Further Accessories

  • Mechanical connecting elements (CASELINK) and mounting brackets (CASEMOUNT)
  • Power supply, such as power supply units (NTX002 and NTX003) as well as cables and connectors
  • BNC adapter (KAB430)
  • Sensor and system connection (cables and connectors)
  • Protective caps for unused ports

Product Literature

Title / DescriptionLanguage
Brochures
English
German
Operating Manuals
German
English
English
English
English
Japanese
Chinese
German
Accessories
English
German
English
English, German
English
English, German
English, German
English
English, German
English
English, German
English, German
English
English
English
German
Safety Instructions
English, German
Declaration of Conformity
Multilanguage
Multilanguage
Multilanguage
Multilanguage
Tech Notes
English

Sensors based on piezo-electric and with integrated electronics explained in detail. IEPE characterises a technical standard for piezoelectric sensors which contain built-in impedance conversion electronics with constant current supply. IEPE sensors are used to measure acceleration, acoustics, force or pressure.

Multilanguage

This TECH NOTE describes how to integrate QuantumX / SomatXR into CANape via standardized XPC-on-Ethernet.

English

This TECH NOTE describes how to integrate QuantumX / SomatXR into ControlDesk software set up as XCP master via standardized XPC-on-Ethernet.

Multilanguage

IEPE characterises a technical standard for piezoelectric sensors which contain built-in impedance conversion electronics with constant current supply. IEPE sensors are used to measure acceleration, acoustics, force or pressure.

English
Get a quote now!

Ask your HBK Sales Engineer

Please send me


Continue

Ask your HBK Sales Engineer

Please send me


Continue

Green check mark Individual offer

Green check mark Technical advice

Green check mark Fast response

Contact us Please send a message and a representative will contact you shortly.