Genesis HighSpeed Transient Recorder & Data Acquisition System

Genesis HighSpeed is the modular platform for fast measurements of electrical and mechanical parameters. A transient recorder, data recorder and data acquisition system – all in one. Thanks to its modular architecture it is equipped for any high speed measurement task. Build your own configuration consisting of a mainframe, data acquisition card and Perception software.

Also available: Devices with signal conditioning for all commonly used sensors and optical waveguide-isolated digitizers for signal acquisition, even in the high-voltage range.

Modular

Choose a mainframe with or without a PC. Using the synchronization function, you can operate several mainframes simultaneously – with thousands of channels in parallel.

Fast

Genesis HighSpeed offers a wide selection of data acquisition cards with sampling rates of 20 kS/s to 100 MS/s. Save your data streams directly to hard disk at up to 400 MB/s. Dual acquisition mode makes it possible to switch sampling rates – if necessary up to 400 times per second.

Safe

Even in challenging application environments, you can be sure that your measurement results are secure with Perception and Genesis HighSpeed – especially for non-repeatable tests.

Versatile Applications

 Aerospace

 Energy / High-Voltage

  • Circuit breaker and switchgear testing
  • Lightning impulse analysis
  • Switching impulse analysis
  • Analysis of transient recovery voltage (TRV)
  • Fuse test

 Automotive

  • Management on injection systems
  • Analysis on ignition coils

 Electric Drives & Generators

 Service

  • Preventive maintenance and inspection
  • Previsions according to maintenance plan
  • Troubleshooting

Select your Genesis HighSpeed DAQ System

Use the filter below to define the signals/sensors and the speed of your measurement, the quantity of channels and the kind of mainframe you need. If you aren't sure about a requirement, just leave it open. 

Selected: no filter

Sensors and Signals














Sample Rate








Channels per Card





Mainframes


Your selection returned 20 products.

GN840B / GN1640B
GN840B / GN1640B
The universal and fast data acquisition card (DAQ card) supports 9 different sensor types with 500 kS/s on every input channel and is perfectly suited f...
GN610B
GN610B
The isolated 1 kV input card significantly expands your application options for electrical testing and real-time calculations.
GN611B
GN611B
The isolated 1 kV input card significantly expands your application options for electrical testing and real-time calculations.
GN815
GN815
The GEN DAQ Basic/IEPE ISO 2 MS/s Input Card is a general purpose signal conditioner for use with voltage inputs, externally conditioned signals or prob...
GN816
GN816
The GEN DAQ Basic/IEPE ISO 200 kS/s Input Card is a general purpose signal conditioner for use with voltage inputs, externally conditioned signals or pr...
GN410
GN410
The GEN DAQ Bridge ISO 200kS/s Input Card supports strain gauge signal conditioner with voltage and current excitation.
GN411
GN411
The GEN DAQ Bridge ISO 1MS/s Input Card supports strain gage signal conditioner with voltage and current excitation.
GN412
GN412
For ultra fast signals, the 100 MS/s high speed input card are equipped with four channels sampling at incredible high speed.
GN413
GN413
For ultra fast signals, the 25 MS/s high speed input card are equipped with four channels sampling at incredible high speed.
GN440
GN440
This unique, high-end, data acquisition card with ultra-fast instruments serves a variety of needs; from differential and/or isolated measurements
GN441
GN441
This unique, high-end, data acquisition card with ultra-fast instruments serves a variety of needs; from differential and/or isolated measurements
GN3210
GN3210
This 32 channel card supports Charge transducers, IEPE transducers as well as TEDS class 1 support for IEPE.
GN3211
GN3211
In differential mode, this 32 channel card can be used in electrically noisy environments.
GN4070
GN4070
The Binary Marker HV board is a dedicated input option for GEN DAQ products.
GN6470
GN6470
The Binary Marker CT board CT is a dedicated binary input option for GEN DAQ products.
GEN3i
GEN3i
GEN3i is a powerful and fast transient and data recorder. It offers both continuous direct-to-disk with up to 200 MB/s as well as fast transient recordi...
GEN3t
GEN3t
The powerful GEN3t high-speed data acquisition system from HBM is designed for installation in control cabinets (19 ''), therefore very compact.
GEN7i
GEN7i
GEN7i is a powerful and fast data recorder. It offers both continuous direct-to-disk with up to 350 MB/s as well as fast transient recording.
GEN7tA
GEN7tA
The GEN7tA offers high speed and high channel count data aquisition and transient recording for high end requirements. Rapid, reliable, flexible and pre...
GEN17tA
GEN17tA
The GEN17tA offers high speed and high channel count data acquisition and transient recording for high end requirements.

* HBM Genesis HighSpeed products were previously sold under the Nicolet brand. The Nicolet brand is owned by Thermo Fisher Scientific Inc. Corporation.

Get a quote now!

Ask your HBM Sales Engineer

Please send me


Continue

Ask your HBM Sales Engineer

Please send me


Continue

Individual offer

Technical advice

Fast response