Quantumx MX471C - Can FD Under Control for Mobile and Bench Testing

The QuantumX CAN FD bus module MX471C module allows you a simultaneous integration of up to four CAN or CAN FD networks into the QuantumX data acquisition system and can be expanded to as many modules as needed.

This module is able to receive any signal from CAN FD, CAN, CCP, xCP-on-CAN/FD, J1939, ISOBUS or CANopen and combined with analog measurement input modules, plus the Data Recorder is ideally suited as CAN FD recorder for your mobile vehicle test or fleet monitoring task. For this all signals can be acquired as raw signal stream and decoded in PC or recorder software. All the acquired signals can also be decoded in real-time and transferred to analog voltage output (MX878B) or for instance to an Ethernet based fieldbus (CX27C) for bench integration.

The module’s powerful CAN gateway mode allows you up to transmit up to 200 analog inputs signals to your automation system and thus an easy way integrating new equipment in your existing bench test or in any mobile recorder or test equipment. For this all signals can be encoded in real-time which allows lowest latencies < 1 ms.

MX471C also operates as Ethernet gateway. So any signal from directly connected MX modules can be transferred to Ethernet and to a PC or recorder.

Additionally, messages can be split up, as required, and reassembled, for instance, to setting up a CAN-2-CAN gateway is possible.

Powerful

  • Time stamped signal acquisition on up to four CAN FD busses, fully isolated
  • Single device receiving signals (raw or on-board real-time decoding), analog signal transfer and Ethernet gateway in parallel
  • High data transfer rates of up to 4 MBit/s in CAN FD mode

Receive and transmit with high data throughput

High connectivity

  • Receiving many different protocols such as CAN FD, CAN 2.0 A/B, CCP, xCP-on-CAN, J1939, ISOBUS, CANopen
  • Transmitting any analog data from connected QuantumX modules to CAN FD or CAN
  • Transmitting any analog data from connected QuantumX modules to Ethernet and to PC or data recorder

Flexible integration into various networks owing to many supported protocols

Universal use

  • Four individually configurable, electrically isolated channels
  • Ideal for measurements with multiple CAN bus systems (individually configurable channels)
  • Packet generation and transmission of analog inputs via CAN messages (Gateway Mode)
  • Extensive range of accessories: Cables, connectors, drivers, and a software package

Synchronous recording of bus signals, completely synchronous with the analog sensor data provided by other MX modules, owing to optimal integration into the QuantumX family

QuantumX MX471C – CAN FD

  • Datarate: up to 4 MBit/s
  • Supported: ISO CAN FD 11898-1:2015, CAN 2.0 A/B, J1939, ISOBUS, CANopen
  • Interfaces: Gigabit-Ethernet, FireWire, Integration into backplane

HBMshop  QuantumX overview

Technical Documentation

Title / DescriptionLanguage
Data Sheets
Japanese
Chinese
English
German
Japanese
Chinese
Brochures
English
English (US)
German
Portuguese
Japanese
Chinese
Operating Manuals
English
English
German
English
Japanese
Chinese
English, German
English, German
Italian
Accessories
English
German
German, English
Italian
English
Italian
Declaration of Conformity
Multilanguage
Multilanguage
Russian
Russian
Tech Notes

This TECH NOTE explains the highly accurate time sync mechanism Precision Time Protocol or short PTP, its advantages and its use in Test & Measurement applications.

English

This TECH NOTE shows available and tested PTP components together with HBM equipment and can be used as reference source giving you some recommendations.

English
HBMshop See prices, availability and get an instant quote.
Get a quote now!

Ask your HBM Sales Engineer

Please send me


Continue

Ask your HBM Sales Engineer

Please send me


Continue

Individual offer

Technical advice

Fast response