MP85A EASYswitch process controller for switch testing MP85A EASYswitch process controller for switch testing | HBM

Process Controller MP85A-S EASYswitch: For efficient haptics testing and functional testing

With its two universal digital signal inputs, the MP85A-S industrial process controller simultaneously captures a wide range of measurement data on the function and haptics of switch and closing systems in just one test cycle.

MP85A-S EASYswitch is used, for example, in end-of-line tests in the automotive and furniture industry, including the testing of switches as well as of drawer and clasp elements. With its powerful switching point algorithms, tolerance windows and fast limit value alarms, the intelligent process controller can be individually adapted to ensure 100% quality control - so that switches and locking systems always function reliably in the future.

MP85A-S EASYswitch checks up to 5 switching elements at the same time, visualizes the measured data in real-time, and allows for quick and uncomplicated production changes with 1,000 storage spaces for recipes (setting sets). At the same time, the comprehensive and multi-level FASTpress Suite software package simplifies configuration and data evaluation and documentation.

  • Accuracy class: 0,1
  • Device interfaces: Industrial Ethernet, Digital I / Os and fieldbus, CANopen, Profibus DPV1 and Profinet RT
  • Storage for recipes (set of settings): 1,000

Complete evaluation

  • 2-channel evaluation in y / x or y / t mode
  • Intelligent real-time data reduction
  • Simultaneous testing of up to 5 switching elements
  • Switching point position, operation, direction and repetitions, as well as actuating force and torque in the switching test window
  • Fault-free process monitoring with diagnostics, fault and alarm signaling
  • Real-time visualization of measurement and process data
  • Comprehensive control with tolerance window and limit value evaluations

100% quality control and process monitoring in real-time with powerful algorithms and alarming

Universal Use

  • Two universal measuring inputs for strain gages, inductive half and full bridges, counters and SSI rotary encoders
  • Quick access to up to 1,000 stored set sets (recipes)
  • Detection of the smallest part load areas with a high 24-bit resolution
  • High EMC resistance
  • Easy installation and parameterization with PME assistants as well as TEDS sensor detection

Can be used in a wide range of applications, due to test parameters that can be stored individually.

Stand-alone or cross-linked

  • Free "PME assistant" software for parameterization
  • Easy documentation of process data and IO / NIO events in ASCII, Q-DAS or IPM data format via Ethernet or internal memory card
  • Powerful software FASTpress Suite and INDUSTRYmonitor available for production and program example for all common fieldbuses

Easy start-up and comprehensive documentation with free PME assistant and comprehensive software suite

 

MPA85A-S-EASYswitch provides you with an extensive range of products:

  • FASTpress-Suite: the comprehensive software for process control in production and end-of-line testing
  • Application Programmers Interface (API) for programming individual applications
  • ePLAN macros available for free download
  • Display and control terminals (on request)
  • Sensors for many testing and monitoring tasks

Product Literature

Title / DescriptionLanguage
Data Sheets
MP85A-S / MP85ADP-S EASYswitch - Caractéristiques techniques French
MP85A-S / MP85ADP-S EASYswitch - Data Sheet English
MP85A-S / MP85ADP-S EASYswitch - Datenblatt German
Brochures
MP85A-S EASYswitch - Brochure English
MP85A-S EASYswitch - Brochure French
MP85A-S EASYswitch - Broschüre German
Operating Manuals
MP85A - Aide sur French
MP85A - Description d'interface French
MP85A - Operating manual English, German
MP85A - Program Help English
MP85A - Programmhilfe German
MP85A, MP85ADP, MP85A-S, MP85ADP-S - Manuel d'emploi French
Quick Start Guides
MP85A FASTpress PME Assistant - Guida breve Italian
MP85A(DP) FASTpress / MP85A(DP)-S EASYswitch - Quick Start Guide English, German
Accessories
GK7000 / GK7600 - Caractéristiques techniques French
GK7000 / GK7600 - Data Sheet English
GK7000 / GK7600 - Datenblatt German
GK7000 / GK7600 - Operation Manual English, German, French
P-S1503P 15" Panel PC - Data Sheet English
P-S1503P 15" Panel PC - Datenblatt German
Safety Instructions
MP85A - Avvertenze di sicurezza Italian
MP85A - Safety Instructions French, English, German
Declaration of Conformity
1-KAB, K-KAB (cable) - EU Declaration of Conformity Multilanguage
MP85A / MP85ADP - EU Declaration of Conformity Multilanguage
Device Descriptions
PME EDS files

EDS files for PME (MP01, MP30, MP55, MP60, MP85).

Date: 11/2011  |  Version: 1.01  |  Size: 33 KB

Multilanguage
Firmware
MP85A(DP)-S Firmware Switch and Haptic Testing

This firmware includes function and features for Switch- and Haptic-Test of mechanical and electrical components, like doors, flaps but also electrical switches. It can be uploaded with the PME-Updater into each standard MP85A(DP) and appears after the update as MP85A(DP)-S.

Detailed explanation of the switch-test functions are in the MP85A manual and interface-description. For PLC integration standard MP85A Device-Description-Files can be used.

 

Date: 04/2021  |  Version: 2.38  |  Size: 429 KB

Multilanguage
PME Firmware for hardware version 1.xx

For PME hardware version 1.xx (MP01-MP70) and all MP85/DP! For newer devices, please use the PME firmware for hardware version 2.xx on this page. Archive including all current firmware files for modules of the PME series. The appropriate firmware loader is part of the PME assistant. The zip file has to be extracted into the PME assistant directory. It includes following firmware versions:

  • MP01 Version 1.12
  • MP30 Version 1.04
  • MP30DP Version 1.04
  • MP55 Version 1.42
  • MP55DP Version 1.42
  • MP55DPS6 Version 1.42
  • MP60 Version 1.18
  • MP60DP Version 1.18
  • MP70DP Version 1.05
  • MP70DPS7 Version 1.05
  • MP70S7 Version 1.05
  • MP85 Version 1.10
  • MP85DP Version 1.10

Date: 05/2007  |  Version: HW1  |  Size: 887 KB

Multilanguage
PME Firmware for hardware version 2.xx

For PME hardware version 2.xx (MP01-MP70) and all MP85A/ADP! For older devices, please use the PME firmware for hardware version 1.xx on this page. Archive including all current firmware files for modules of the PME series. The appropriate firmware loader is part of the PME assistant. The zip file has to be extracted into the PME assistant directory. It includes following firmware versions:

  • MP01 Version 2.00
  • MP30 Version 2.02
  • MP30DP Version 2.02
  • MP55 Version 2.06
  • MP55DP Version 2.06
  • MP55DPS6 Version 2.02
  • MP60 Version 2.00
  • MP60DP Version 2.00
  • MP70DP Version 2.00
  • MP70DPS7 Version 2.00
  • MP70S7 Version 2.00
  • MP85A Version 2.38
  • MP85ADP Version 2.38
  • MP85A-S Version 2.38
  • MP85ADP-S Version 2.38

Date: 12/2016  |  Version: HW2  |  Size: 2 MB
Related Documents: MP85A Release note FW

Multilanguage
Software
BPMmonitor Application software

This software package contains a modern production related GUI to connect up to max 12 MP85 modules, which run in parallel including Visualization, Process-evaluation, Data-storage and Backup. Up to 999 parameter-sets of each MP85 can be stored onto it´s memory-card. The parameter-sets are divided in “device”-settings such as senor-related settings and “application”-settings such as evaluation-related setting like the tolerance-windows and tolerance-band, etc. With this it´s easy the handle amplifier-setting split to the application settings, because they can be set separately and copied automatically to the related parameter-sets. A Program-help is included in the software.

The software runs under Windows7/8/10 and can be started 25 times for free. To buy the full licence please visit the HBM shop or ask your local HBM representative.

Date: 05/2021  |  Version: 1.2.1.20  |  Size: 15 MB

Multilanguage
EASYmonitorCE Application software

This software package contains the complete application with built-in program help for the GK7000 display terminal. GK7000 works with max. 6 MP85 devices and can be used for the complete parameterization, visualization and storage of process data. The application runs under WindowsCE V5 and V6 and is optimized for a screen resolution of 800x480 pixels. For update details, please follow the steps in UpdateGK7000.pdf, which is included in the zip download.

Date: 05/2019  |  Version: 2.0.6.0  |  Size: 5 MB

Multilanguage
MP85A CAE data for Eplan Electric P8

This project is a macro-project and contains CAE data for Eplan Electric P8.

Date: 08/2011  |  Version: 1.00  |  Size: 19 MB

Multilanguage
NL51N-DPL-Gateway-DP/NP CAE data for Eplan Electric P8

This project is a macro project and contains CAE data for Eplan Electric P8.

 |  Size: 81 KB

Multilanguage
PME FASTpressSuite CD

PME assistant, firmware loader and USB driver (for Windows XP, Windows Vista and Windows 7/8/10) for comfortable setup and visualisation. For smooth operation of modules with CAN interfaces, use the PEAK USB-to-CAN dongle. All required drivers are included and will be installed during startup.

This download includes:

  • PME-Assistant (V3.4.R208)
  • PME-Firmware Loader (V1.1.7)
  • IPM data conversion (V1.1)
  • License-manager for MP85A-Toolkit and MP85A-Runtime (necessary for MP85A PC-applications)

... and the demo versions of:

  • EASYteach (V1.0.5.10)
  • MP85A-Toolkit (V1.0.R5.12)
  • EASYmonitor CE (V1.1.1.1)
  • INDUSTRYmonitor (V1.2.1.22)

You can start those demo versions up to 25 times for free. To buy the full licence please visit the HBM shop or ask your local HBM representative.

Date: 01/2019  |  Version: 1.52  |  Size: 165 MB
Related Documents: Release Notes

Multilanguage
PME MP85ADP(-S) Example Project

Program example to the communication of the HBM process-controller MP85 with a Siemens Siemens CPU317-2 DP:
The example of the communication with the MP85A about Ethernet please unzip recursive in the ZIP archive (relatively stored paths). The program sends and receives data by means of the functions AG_send and AG_Recv (FC5 and FC6). It are sent 10 bytes to the SPS and 14 bytes should be received again. In this project the Siemens CPU317-2 DP has the IP address 172.21.64.250. The IP address of the MP85 is 172.21.64.253 (port 4020). A description with program-code and comments is shown in the documents „OP1_MP85A_Eth-Com-CPU317-2 DP.pdf “
Legal notice: The example given is intended to illustrate the integration of the MP85ADP(-S) into Siemens' Step7 software via Profibus. This example does not imply any warranty or guarantee.

Date: 07/2015  |  Size: 2 MB

Multilanguage
PME MP85ADP(-S) Example Project

Example-Sequence to read and write consitent data as well an example to read and write the workpiece-id via Profibus-DPV1 with Siematic Step7:
This basic example shows the transmission of measuring-value and Control-word (Float data format) from the MP85ADP(-S) via Provibus-DP interface to a master (e.g. Siemens PLC). Programming is done in Step7 Siemens software using the function blocks for reading (SFC14) and writing (SFC15) MP85ADP data. Further more the example contains reading and writing the workpiece-id via the Profibus DPV1-function using the function-blocks for reading (SFB52) und writing (SFB53) to MP85ADP(-S). A description with program-code and comments is shown in the documents „OB1_DPV1_Werkstueck_de.pdf“ and „OB1_DPV1_Werkstueck_en.pdf“.
Legal notice: The example given is intended to illustrate the integration of the MP85ADP(-S) into Siemens' Step7 software via Profibus. This example does not imply any warranty or guarantee.

Date: 07/2010  |  Size: 6 MB

Multilanguage
PME MP85ADP(-S) Profinet-integration

This is an instruction for integrating a MP85DP in a profinet network by using the Hilscher gateway NL51N-DPL, which converts Profibus to Profinet.

It shows how to configure the Hilscher gateway, which is able to transmit cyclic data, and establish a profinet connection (RT).

Furthermore, it is shown how to transmit acyclic data via the gateway by using the profibus container.

In this example, the workpiece id of the MP85 is changed by our TIA PLC program.

 

Date: 02/2020  |  Size: 197 MB

Multilanguage
PME Profibus DP

PROFIBUS DP master file for PME: (MP30DP, MP55DP, MP60DP, MP70DP, MP70DPS7,MP85MP). German version: GSD file, English version: GSE file.

Date: 07/2013  |  Version: 1.20  |  Size: 30 KB

Multilanguage
Repair-instruction to fix Boot-errors on the GK7000 Display-Terminal

This instruction can be used to repair the GK7000 display-terminal in case if a boot-error on the GK7000 occurs. For fixing the error a SD-HD card is needed. This card must have a capacity of 4 GB or 8 GB. SD cards with less/more capacity are not supported.

Date: 05/2019  |  Size: 23 MB

Multilanguage
Sequence for reading the curve memory via ProfibusDPV1 using Simatic Step7

The basic sequence of transmission of measured value (Float data format) from the MP85ADP curve memory via the Profibus-DP interface to a master (e.g. Siemens PLC) is shown in this file.

Date: 07/2015  |  Size: 926 KB

Multilanguage
HBMshop See prices, availability and get an instant quote.