Z70 is a single component, cold curing adhesive made of cyanacrylate. Curing is only possible on very slight adhesive films and at room temperature under thumb pressure. The air humidity needs to be between 40% and 70% as a catalyst for the curing process.

A curing of Z70 is not possible under certain unfavorable conditions (as very low air humidity (< 40 %), surfaces with acid reaction or low temperatures). In this case, the accelerator BCY01 can be used.

Delivery: Reclosable plastic bottles (10 cm³).

The following accessories are included in delivery:

  • Fluoropolymer release film
  • Fluoropolymer strip
  • Drop dosing device
  • Manual and Security Data Sheet

Documents

Title / Description Language
Brochures
German
English
Instructions for use
French, German, English
Italian
Safety Instructions
French, English, German
Download: Technical Article / White Paper

Building a complete wind turbine structural and condition monitoring system.

English
English
English

Order Number

1-Z70

Get a quote now!

Ask your HBM Sales Engineer

Please send me


Continue

Ask your HBM Sales Engineer

Please send me


Continue

Individual offer

Technical advice

Fast response

HBMshop See prices, availability and get an instant quote.