Cables and Stranded Wires for Strain-Gauge Bridges Cables and Stranded Wires for Strain-Gauge Bridges | HBM

Cables and Stranded Wires for the Wiring of Strain-Gauge Bridges

Our range of cables, stranded wires, and wires can provide you with the right accessories for the wiring of strain gauges; for instance, they can be utilized in the internal wiring of strain gauge bridges or for connecting through strain gauges to the solder terminal. Additionally, we offer you cables and stranded wires that can be used for the internal wiring of transducers and sensors.

Configurable measuring cables for your strain gage installations

Configure your required cables for measuring tasks from simple to complex according to your needs. Whether you need a simple 4-core cable to connect a quarter bridge over a short distance, or a trunk cable with 24-cores to bridge long distances.

Choose from 16 different cable types the right cable and select the required length. Cable lengths of 10m, 20m, 30m or 50m are packed in plastic bags. Lengths of 100m or 200m are spooled on a reel.

All technical details can be found in the product data sheet. These cables can also be configured and ordered in the webshop.

Buy Here

Shielded, flexible PFA measurement cable

This thin, flexible, and at the same time rugged PFA measurement cable is used for connecting strain gauge bridge circuits. 

Due to its shielding, the cable is well suited for bridging over long distances. It can be used in a wide temperature range (-200°C to +200°C).

Wire: 6-core cable, stranded wire

Thermal resistance range: -200°C to +250°C

Cross-section diameter: 0,04 mm2

Sales unit: 20 m on reel

Resistance: 0,492 Ω/m

Buy Here

 

 

Wire: 4-core cable, stranded wire

Thermal resistance range: -200°C to +250°C

Cross-section diameter: 0,04 mm2

Sales unit: 20 m on reel

Resistance: 0,492 Ω/m

 Buy Here

HBMshop See prices, availability and get an instant quote.