DB Systemtechnik in Minden, Germany, an independent testing authority, explores the possibilities resulting from the use of optical strain gages, for example K-OL from HBK.
Many tests and inspections are mandatory for approval of new railway vehicles. These include test runs with wheelsets enabling the forces between wheel and rail to be measured. At present, DB Systemtechnik in Minden, Germany, an independent testing authority, explores the possibilities resulting from the use of optical strain gages, for example K-OL from HBK.
At the testing authority in Minden, strain gages are installed on a wheelset that comprises two wheels and the axle. This setup requires a total of 48 strain gages per wheel. Signal lines are led into the hollow axle through a hole. The complete electronics including amplifiers and signal transmission is located at the end of the axle. Installation of strain gages and signal lines is complex and takes several weeks per wheelset. The strain gages need to be individually installed and connected. Since the wheelset is subject to relatively high mechanical stress during the test runs, the signal lines, too, need to be completely bonded.
When the strain gages, the signal lines and the electronics have been installed, the measuring wheelset needs to be calibrated. For this purpose, the complete wheelset is built into a specially developed test stand. The cable entry holes from the areas of SG installation to the amplifier constitute a relevant stability influence of the measuring wheelset. The required effort to consistently ensure crack-free parts through ultrasonic tests is thus relatively high. Another drawback of the test setup is that due to the place of installation the measurement electronics - with its rotating part installed in and its stationary part installed on the axle - is subject to the extremely high stress in the area of the wheelset.
DB Systemtechnik in Minden consistently works on optimizing and further developing the method to eliminate the above-described drawbacks of the measuring wheelsets. One approach that is currently being followed is to use optical strain gages like K-OL from HBK.
A major benefit when using optical strain gages is the significantly reduced installation effort. "Using optical strain gages would enable us to shorten installation times from four to five weeks at present to few days," explains Andreas Brodtka, head of production of measuring wheelsets at DB Systemtechnik. The reduced installation effort and less maintenance during the test runs would, of course, result in reduced costs. As the complex compensation for interference would not be needed anymore, 20 strain gages per wheel would be sufficient. "The fact that up to 20 optical strain gages are installed in a single fiber is of special importance", states the test engineer.
In addition, the thin glass fiber could be led to the exterior without any hole having to be drilled in the axle. A solution enabling laying of the optical fiber without any hole is currently being developed. In the area of transition from the rotating to the stationary part on the wheelset that will still be necessary, the signals transmitted by the optical fiber could be sent via a so-called optical slip-ring assembly. The interrogator evaluating the signals of the optical strain gages could then be located well-protected inside the vehicle and receive signals via optical fibers. The interference-prone electronics in the axle would no longer be needed. At present, optical strain gages are being used at DB Systemtechnik in Minden only within the scope of a research project, but the test results show the potential of the optical strain gages.
As Europe's largest competence centre for railway technology, DB Systemtechnik is the engineering office of DB AG. As an efficient and customer-oriented service provider, DB Systemtechnik not only provides the Group with its expertise as a competent partner, but is also increasingly active in the global rail market. DB Systemtechnik's management system is certified to ISO 9001, our inspection body is accredited to DIN EN ISO/IEC 17020 and our testing laboratories are accredited to DIN EN ISO/IEC 17025.
The optical sensor line newLight by HBK enables large strain measurement ranges at increased long-term stability. It is the ideal choice for structural health monitoring due to its fast and easy installation and its resistance to environmental conditions such as humidity, rust, and salt even over extremely long distances.
Rail plays an important role in green logistics, freight distribution and passenger mobility. HBK understands the industry needs and offers a vast range of tools for test and measurement as well as operational monitoring and predictive maintenance.
Noise control: When it comes to environmental noise, Gießen Regional Council and HBK are listening very carefully
New ChovACUSTIC systems leverage all the benefits of state-of-the-art sound level meters
The technical complexity and regulations relating to noise and vibration of machinery and ships demand the latest technology
Controlling noise and vibration in the railway sector is key for the well-being of residents and passengers alike
The Novares Group looks beyond the current crisis to a future with a V8900 HBT1220 shaker from HBK.
BATZ uses HBK equipment for testing according to its customers’ requirements
Crown Equipment Corporation explored how improving the sound of their forklift trucks could create a better product and a more satisfying user experience
Air France Case Study highlighting how Air France - a major player in engine MRO - optimized their Zephyr test bench using B&K Tescia Repetitive Testing System.
To decrease the hours spent driving between fields during harvest time, New Holland reduced the pass-by noise of machines, gaining a higher road speed rating.
Acciona Infrastructure needed to increase competences and offerings for building acoustics and sound insulation, Brüel & Kjær provided the solution.
Ground Vibration Tests Prove to be a Key Milestone for NASA’s X-57 Maxwell
Case Study featuring Lockheed Martin and how Brüel & Kjær helped test different variants of the F-35 jet with the aim of protecting ground crews from noise exposure and increasing the durability of the jets.
Gorenje wanted to increase their R&D efficiency with a faster acoustic characterization system. And they turned to us
After Airbus modified the A330 to create the military version, they needed to update the aircraft’s noise certification so it could still use civilian airports.
The French aerospace research centre, ONERA, has acquired a 200-channel Brüel & Kjær PULSE™ acoustic data acquisition system for wind tunnel testing.
Aircraft manufacturers have been approved to use PULSE for aircraft noise certification according to international standards.
Dassault Aviation has performed noise certification tests on their new Falcon 8X business jet, using an acoustic data acquisition and analysis system from Brüel & Kjær.
Airbus has acquired a 250-channel Brüel & Kjær PULSE™ data acquisition system for multi-purpose noise and vibration testing.
Engineering consultancy company ATA Engineering, Inc (ATA) has strengthened its ties with instrument and solution provider, Brüel & Kjær, with the procurement of a PULSE Data Acquisition and Analysis system.
Brüel & Kjær is to supply Pratt & Whitney with a Static Engine Certification Test (SECT) System.
Brüel & Kjær recently delivered their HVME (Hull Vibration Monitoring Equipment) solution to BAE Systems Submarine Solutions.
Airbus Defence and Space and Brüel & Kjær have successfully completed noise measurements on the Eurofighter jet, to calculate its on-ground noise exposure under different thrust and flight configurations.
Brüel & Kjær has been selected by Dassault Aviation to provide high-pressure surface microphones for the development of the nEUROn experimental Unmanned Combat Air Vehicle (UCAV).
Aerospace leader Lockheed Martin has expanded its vibration measurement capabilities for testing satellite systems, with a 450-channel PULSE™ vibro-acoustic data acquisition system.
Collaboration with Airbus Defence & Space will model sound for low-noise flight plans
To ensure high quality and increase production yield, Volkswagen contacted Brüel & Kjær to equip DISCOM Production Testing System to pinpoint the root causes.
To minimize errors and reduce setup time, automotive seating manufacturer, Faurecia, uses the Transducer Smart Setup app for modal measurements.
The challenge car makers face every day is designing cars to withstand all possible use cases during their entire product lifecycle. To support these investigations, Stellantis uses nCode DesignLife software within their development processes for fatigue analysis.
With a wide range of sound measurement tasks, VM Acoustics needed a measuring instrument, that could serve all their needs reliably.
Once a year in the Lost Village revellers gather to immerse themselves in four days of live music and festivities. HBK, in agreement with the local authority and with the help of Noisy’s noise monitoring platform connected to B&K 2245 sound level meters, reduced the sound levels, resulting in very few noise complaints over the weekend.
HBK's Advanced Material Characterisation & Testing facility in the UK, has helped accelerate NIO's fatigue simulation capabilities through a unique combination of bespoke testing solutions to provide high quality material fatigue data and the power of nCode software.
HBK’s Engineering Solutions embarked on the challenge of developing a common Failure Reporting, Analysis, and Corrective Action System (C-FRACAS+) for NAVAIR Command’s 33 programmes, each comprising diverse aircraft and systems with unique data requirements.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.