As performance requirements for generators have become increasingly demanding, Cummins South East Asia Services in Singapore has turned to HBK’s GEN2i data acquisition system to provide the extensive analysis and isolation requirements needed.
Both American Bureau of Shipping (ABS) and ISO 8528 requirements for alternating current generator sets for land and marine use demand that any frequency and voltage variations can be verified as staying within specified limits. The regulations focus on the limits maintained when generator sets are undergoing numerous load changes over a 40-minute period.
The data acquisition equipment had to be capable of continuously recording three-phase voltages of 50/60 Hz and up to 480 Vrms plus five K-type thermocouples and other miscellaneous signals - each less than 10 volts.
The equipment also needed to calculate a wide range of performance criteria, including the Vrms and frequency trend waveforms for all three phases, maximum and minimum voltage and frequency values, percent change in voltage and frequency and the voltage and frequency recovery time for every load change; these occur roughly every 40 seconds.
To meet these exacting demands HBK provided its GEN2i Genesis HighSpeed eight-channel, 200 kS/s data acquisition system. Additional equipment included three 25 MS/s high-voltage fiber-optic isolated digitizers, providing a virtually infinite isolation barrier, with an associated fiber-optic receiver card and high voltage probes.
Analysis and reporting of a generator’s performance is provided by HBK’s Perception software using the integrated formula database to generate the needed analysis algorithms. On-site training for Cummins’ staff was also provided by HBK.
Standard functions within the Perception software enable both Vrms and frequency trends to be readily identified.
A particular advantage of HBK’s DAQ equipment that made the complex analysis significantly easier and quicker was the ability to acquire a trigger signal for every load change while recording in dual mode.
This enabled 40 minutes of continuous multi-channel data from up to 50 load changes to be easily analyzed. Results can be rapidly produced, either as log files or as a 50-page report showing all waveforms for every load change.
By utilizing HBK’s GEN2i data acquisition equipment and Perception software, Cummins can now easily meet the demanding requirements of ABS and ISO 8528 while promoting better understanding of performance criteria for its generator sets to its global customer base.
√ Safe and reliable data acquisition to meet ASB and ISO 8528 requirements
√ Easy design and creation of custom reports within minutes for more efficient testing
√ Better understanding of performance data
Cummins Inc., a global power leader, is a corporation of complementary business units that design, manufacture, distribute and service engines and related technologies, including fuel systems, controls, air handling, filtration, emission solutions and electrical power generation systems.
Headquartered in Columbus, Indiana (USA), Cummins employs approximately 44,000 people worldwide and serves customers in approximately 190 countries and territories through a network of more than 600 company-owned and independent distributor locations and approximately 6,500 dealer locations.
Cummins earned $1.85 billion on sales of $18.0 billion in 2011. The Commercial Marine and Offshore Oil & Gas Center of Excellence Business, design and manufacturing center in Singapore, is responsible for delivering a new range of factory-customizable products for oil and gas and commercial marine customers.
For more information, contact your local Cummins Distributor or email [email protected]
Whether your application, is mobile or stationary, on a test cell or under extreme environmental conditions, HBK has the right measurement data acquisition system for your needs. Benefit from the unique "made by HBK" precision and reliability while enjoying the best possible price-to-performance ratio.
Genesis HighSpeed (GenHS) is your modular platform for fast measurements of electrical and mechanical parameters. A transient recorder, data recorder and data acquisition system – all in one. Build your own configuration consisting of a mainframe, data acquisition input cards and the Perception software.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
