HBM provides an open data acquisition eco system, to enable customers and partners to integrate the powerful data acquisition solutions into basically any PC software or system. Therefore, HBM offers native drivers and interfaces for the most common PC software packages. In addition some software providers offer their own drivers.
 QuantumX/SomatXR |  Genesis HighSpeed |  MGCplus |  PMX |  CMD 600 | |
| LabVIEW |  | | | | |
| API | | | | |  |
| CANape | | | | | |
LabVIEW software helps visualizing your application, including hardware configuration and measurement data. The graphical programming approach makes it easy to implement the precise HBM DAQ systems. Choose from three different LabVIEW Drivers:
Customers of these HBM DAQ systems benefit twice: General commands such as device scan, channel selection, and measurement are the same for these systems so no re-programming of these components is required when changing over to new hardware.
Integration of QuantumX, SomatXR, PMX and MGCplus in LabVIEW
More Drivers for Genesis HighSpeed & Perception
Functionality is provided in LabVIEW through VIs. The driver is provided for free in the PACEline CMD600 download section with an example and documentation.
| LabVIEW | |
| Hybrid systems possible | |
| Synchronization of systems | NTP(all), PTP(Qx), and Sync-cable(all). |
| Settings via Driver | Device Scan, Filter + Sample Rate, and Data Acquisition. |
| Parameterization of DAQ | With MX Assistant or MGCplus Assistant |
| Device scan | |
| Measurement configuration | Only sample rate and filter |
| Sensor configuration | No dedicated VIs |
| Analog IN DAQ | |
| Analog Out (direct setting) | |
| Analog Out (channel routing | |
| Digital In/Out DAQ | |
| Digital Out (direct setting) | |
| CAN DAQ | PMX: only via CODESYS / calculated channels |
LabVIEW is a trademark of National Instruments. Neither HBM, nor any software programs or other goods or services offered by HBM, are affiliated with, endorsed by, or sponsored by National Instruments.
The HBM common API enables users to develop their own PC software application using Microsoft Visual Studio including the required functionalities for integrating HBM DAQ systems such as QuantumX, PMX and MGCplus:
In particular, system integrators benefit from integration, as they can develop and sell their own solutions for specific markets, automatically protecting their know-how.
| API version 5.0 | |
| Hybrid systems possible | |
| Synchronization of systems | NTP(all), PTP(Qx), and Sync-cable(all). |
| Settings via Driver | Device Scan, Filter + Sample Rate, Sensor configuration, and Data acquisition |
| Parameterization of DAQ | With functions of the API for all device families. With MX Assistant or MGCplus Assistant |
| Device scan | |
| Measurement configuration | |
| Sensor configuration | |
| Analog IN DAQ | |
| Analog Out (direct setting) | |
| Analog Out (channel routing | |
| Digital In/Out DAQ | |
| Digital Out (direct setting) | |
| CAN DAQ | |
The integration of QuantumX/SomatXR data acquisition with CANape software allows the user to record high-speed signals from external sensors with up to 96,000 samples per second and channel, in parallel with the recording of the ECU signals. All the signals are recorded synchronously and in one file, which saves a lot of time.
Additional resource
Integration of QuantumX in CANape
| CANape | |
| Hybrid systems possible | Only QuantumX + SomatXR |
| Synchronization of systems | NTP: module needs to be synchronized with Host PC |
| Settings via Driver | Data acquisition |
| Parameterization of DAQ | Only via MX Assistant |
| Device scan | Only via MX Assistant |
| Measurement configuration | Only via MX Assistant |
| Sensor configuration | Only via MX Assistant |
| Analog IN DAQ | Only via MX Assistant |
| Analog Out (direct setting) | Only via MX Assistant |
| Analog Out (channel routing | Only via MX Assistant |
| Digital In/Out DAQ | |
| Digital Out (direct setting) | |
| CAN DAQ | Support of Ethernet Gateway Functionality (CX27C) |
CANape is a trademark of Vector Informatik GmbH. Neither HBM, nor any software programs or other goods or services offered by HBM, are affiliated with, endorsed by, or sponsored by Vector Informatik GmbH.
QuantumX and SomatXR offer the integration into various software packages via standard interfaces:
The following HBM partners offer their own drivers with software packages for download:
With the catman DAQ software you can easily acquire, visualize, save and analyze your measured data – immediately or post-process. Whether it is in mobile road tests, testing of components in test benches, monitoring tasks or research: catman is up to any challenge.
| Title / Description | Language | Products | Language | Content Types |
|---|---|---|---|---|
| Operating Manuals | ||||
| HBM Common API - User Manual | English | |||
| HBM LabVIEW Driver - User Manual | English | |||
| Perception remote control using LabVIEW - User Manual | English | |||
| QuantumX CANape Driver - Operating Manual | English, German | |||
| QuantumX Driver per CANape - Manuale di istruzione | Italian | |||
| Driver | ||||
|
HBM Common API 5.0
The HBM common API enables users to develop their own PC software application using Microsoft Visual Studio, to integrate HBM DAQ systems QuantumX, SomatXR, PMX and MGCplus. Date: 01/2020
|
Version: 5.0
|
Size: 27 MB
| Multilanguage | |||
|
HBM LabVIEW Driver 32-bit
The driver allows to integrate QuantumX, SomatXR, PMX and MGCplus in LabVIEW. Please see the Release Notes for further details and requirements. The download can be used 30 days as trial. Date: 01/2017
|
Version: 3.0
|
Size: 11 MB
| Multilanguage | |||
|
HBM LabVIEW Driver 64-bit
The driver allows to integrate QuantumX, SomatXR, PMX and MGCplus in LabVIEW. Please see the Release Notes for further details and requirements. The download can be used 30 days as trial. Date: 01/2017
|
Version: 3.0
|
Size: 12 MB
| Multilanguage | |||
|
QuantumX / SomatXR CANape Driver
The driver allows you to integrate all QuantumX / SomatXR measurement modules in CANape. Date: 06/2018
|
Version: 4.1.5
|
Size: 11 MB
| Multilanguage | |||
| Software | ||||
|
Perception remote control using LabView Demo
LabView Demo program using the Perception RPC interface Date: 06/2019 | Size: 144 MB | Multilanguage | |||
|
Perception remote control using LabView Demo source code
LabView source code of the Perception remote control Demo Date: 06/2019 | Size: 1 MB | Multilanguage | |||
Individual offer
Technical advice
Fast response