Wall or DIN rail-mount basic device for 5 PMX modules
- Wall or DIN rail-mount basic device for 5 PMX modules for up to four measurement or two I/O modules and one real-time Ethernet fieldbus module
- Max. 16 measurement inputs with 24-bit A/D converter and up to 38.4 kHz sampling rate per channel
- 32 real-time calculation channels with peak/limit values and mathematical and scientific functions
- All measurement and calculation signals can be used in parallel via fieldbus or Ethernet interface or are available for further signal processing via the PX878 analog outputs
- Short setup time and test cycles thanks to up to 1000 parameter sets/measurement programs stored in the PMX
- USB 2.0 host interface for reset of device parameters, network settings and user passwords (data storage and monitoring soon available)
- Integrated, password-protected 3-level user interface (worker/service/administrator)
Module WGX001 with additional CODESYS Soft PLC (IEC61131-3)
Identical with WGX002, however, with additional CODESYS Soft PLC (IEC61131-3) as well as web visualization and CANopen (ISO11898) interface
CODESYS: CODESYS Runtime license already stored in the device, CODESYS software V3.5, PMX package and example on CD included in scope of supply
Available memory in the PMX: 10 MB RAM, 100 MB Flash memory
Up to 100 tasks can be used with 300 Hz timer resolution, i.e. timer-controlled tasks up to 3.33 ms
Up to 30 CODESYS channels can be used directly in the PMX for further processing or output, depending on the hardware configuration
CANopen: In combination with CODESYS, the PMX can be operated as CANopen master or CANopen slave via the CANopen interface. All CANopen based sensors and field modules can be integrated.
