Stick-on: A Convenient and Time-saving Option

With the “stick-on” option, your strain gauges come already pre-coated with adhesive. You do not need any additional adhesive to install the strain gauge on your measuring body. All HBM strain gauges are available pre-coated with phenolic resin-based P250 adhesive.

Efficient

  • Save one process step: the application of the adhesive
  • Optimize adhesive consumption
  • No post-curing needed

Save time and material

Reliable

  • Optimally adapted amount of adhesive on the strain gauge
  • Thin and evenly distributed layer of adhesive on the strain gauge
  • Minimize output signal scattering

Your transducers offer more consistent and enhanced quality

User-friendly

  • Guaranteed shelf life of one year
  • Dry adhesive, facilitating easy handling
  • No additional costs for storage of adhesive

Avoid contact with toxic/irritant chemicals

 

Easy Handling

After preparing the surface of the transducer, the rest is simple:

  1. Position the strain gauge
  2. Fix the strain gauge with a piece of tape
  3. Clamping and curing according to instruction manual

Silicone Rubber

To cure the adhesive, it is necessary to apply pressure to the measuring point. Silicone mats are inserted to ensure that the pressure, which is applied with a pressure device, is distributed evenly.

These are included with the purchase of the adhesives and can be reordered. Strain gauges already coated with adhesive are delivered without silicone mats. These can be purchased separately.

Order Number: 1-SILICONERUBBER

Accessorie: Silicon Rubber

Documents & Downloads

Title / DescriptionLanguage
Data Sheets
German
English
Russian
Instructions for use
English, German, French
Safety Instructions
Multilanguage
Declaration of Conformity
English
Contact us Please send a message and a representative will contact you shortly.