GEN17tA is a robust rack mount transient recorder and data acquisition system (DAQ) and part of the proven Genesis HighSpeed series data acquisition systems. It offers 17 slots for GEN DAQ acquisition cards and accepts any mix of them. The DAQ system is configured and controlled using Perception software. This combination results in a sophisticated instrument for ultra-fast recording, analysis and reporting.
The 1 Gbit Ethernet interface can stream recorded data directly to the PC at a rate of 100 MB/s. The optional 1 Gbit Optical Ethernet allows for isolated control of the mainframe and for cable lengths up to 10 km (6.2 mi) while maintaining full streaming performance. For higher streaming rates of 400 MB/s, a 10 Gbit electrical or optical Ethernet option is available. When more reliable or distributed storage of recorded data is required the GEN17tA mainframe supports an optional, removable Solid State Disk (SSD) or it can store recorded data directly on a Network Attached Storage (NAS) device.
Full transparent time and trigger synchronization on multiple Genesis HighSpeed DAQ systems can be achieved by using the standard optical Master/Slave synchronization connector. To synchronize the absolute time to non Genesis High Speed systems, GEN17tA supports PTP (Precision Time Protocol) and optional IRIG A and B or GPS.
|Title / Description||Language||Products||Language||Content Types|
|GEN series GEN17tA - Data Sheet||English|
|eDrive testing - Brochure||French|
|eDrive Testing - Brochure||English|
|eDrive Testing - Broschüre||German|
|eDrive testing - Opuscolo||Italian|
|eDrive testing - ブローシャー||Japanese|
|eDrive testing - 小冊||Chinese|
|Genesis High Speed - Brochure (US)||English (US)|
|Genesis High Speed - Folheto||Portuguese|
|Genesis HighSpeed - Brochure||English|
|Genesis HighSpeed - Broschüre||German|
|Genesis HighSpeed - 小冊||Chinese|
|7600 Isolated Digitizer GEN series - User Manual||English|
|GEN17ta - User Manual||English|
|HV Impulse Attenuator - User Manual||English|
|Isolated Digitizer GEN series - User Manual||English|
|GEN series G070A - Data Sheet||English|
|GEN series G072 - Data Sheet||English|
|HV Impulse Attenuator - Data Sheet||English|
|GENseries - Safety Instructions||English, German, French, Portuguese, Chinese, Japanese, Korean, Russian|
|Declaration of Conformity|
|1-KAB, K-KAB (cable) - EU Declaration of Conformity||Multilanguage|
|GEN series - EU Declaration of Conformity||Multilanguage|
|Calibration and Verification Software Version 3.04 GEN series - User Manual||English|
|GEN series Calibration Kit - Data Sheet||English|
Hardware Peripheral Update Package
Update HBM approved GEN DAQ hardware peripherals. For example allowing new types of (solid state) drives.
Date: 11/2019 | Version: 7.48.19318 | Size: 5 MB
Perception Software 64 bit
Perception Enterprise (1-PERC-64) is no longer required to run the 64-bit version of Perception. Therefore all Perception versions are available in 64-bit.
The 64-bit version of Perception includes “Full install” and “Free viewer install” – each installation with its own set of features.
The free viewer version of Perception can be used free of charge.
Please note: Perception now includes the instruments firmware. That means it no longer requires an additional download of the firmware for the GEN DAQ systems.
Size: 393 MB