Webinar: Mobile Durability Testing and CAN FD

Sign in

Instant access to all downloads

***If you have an existing HBMshop login you can use the same information to login to HBM.com

This webinar has been recorded and was originally held on June 12, 2018 at HBM in Darmstadt, Germany. Please log in to access the recording.

As complex ECUs in vehicles require more and more bandwidth, the CAN bus reaches its limits. This problem is being addressed with the introduction of CAN FD (Flexible Data Rate CAN). CAN FD offers a higher transmission rate and more user data per message than CAN.

Data acquisition systems must be able to detect signals from this new bus as well as record the data of the vehicle in addition to the analog signals during mobile load data acquisition. On the basis of mobile data acquisition on a test site, we will discuss how this integration takes place in data acquisition systems.

In this 30-minute webinar, HBM product manager Finn Lange will guide you through the following points:

  • What means CAN FD for mobile data acquisition?
  • Road load data acquisition on proving grounds
  • Short live demo & video

Speaker:

Finn Lange 

Product and Application Management Test & measurement at HBM

Contact: 

finn.lange@hbm.com