Software Downloads

Perception 8.28

This is an minor release of Perception mainly improving stability, fixing known problems and adding minor new features.

This is not shipped out with the hardware but only available via web download.

Details about fixed issues and new features can be found in the release notes.

Note: Perception includes the instruments firmware for GEN DAQ systems. So there is no separate firmware available for GEN DAQ systems.

When you connect to hardware using a new version of Perception, the firmware in the hardware will be upgraded accordingly to the same release level.

Perception 8.70

This is a major release of Perception. Due to the fixes, please download the release instead of Perception 8.64.

New Features in e-Power Suite:

• Measurement uncertainty for power and efficiency setpoint values
• Torque ripple analysis
• User-defined variable naming for ePower suite signals
• Optional analysis for harmonic active power and harmonic RMS

Improvements for Hardware:

• Support of Fusion HighSpeed Remote Probes including GN800B, P101I-4, P111I-4, P112I-4
• Fast Span Change via fieldbus Remote Control

Improvements in Perception (selected items only):

• Improvements to user-interface design
• Improved calculations when doing setpoint averaging on the mainframe

Improvements in the Perception ePower Suite (selected items only):

• Improved cycle-based recording in the ePower suite
• Context help

Support Items & Requests:

• 27 Bugs & support items were fixed and implemented

Perception 8.80

This is a major release of Perception. Due to the fixes, please download the release instead of older Perception versions.

New Features in e-Power Suite:

• DQ0 Transformation as optional analysis (you can find the offset-angle tool in the downloads below)
• Setpoints stored as part of a recording
• MU for setpoints supported for remote probes

New Features in Perception:

• Updated look of Acquisition Settings Page
• Allow changing CAN Message ID for acquisition state, time and latency
• Horizontal cursors added to y(t) display live view

New Support of Hardware:

• Fast Remote Probes are supported with HBK part numbers:  1-P201I-4, 1-P211I-4 & 1-P212I-4 (not supported on Gen3iA and  Gen2tB)

Support & Item Requests:

• 15 customer reported bugs were fixed

Installer of the RPC COM wrapper and RPC documentation

Installer of the RPC COM wrapper and RPC documentation

Update HBM approved GEN DAQ hardware peripherals. For example allowing new types of (solid state) drives.

Update HBM approved GEN DAQ hardware peripherals. For example allowing new types of (solid state) drives.

The GEN3i/GEN7i Cumulative Update Package contains updated drivers for GEN DAQ “i” type mainframes. There is a version 4.1.1975 of the RTS IEEE1588 PTP driver, and the latest GEN hardware drivers needed when upgrading an older, Windows 7 based GEN3i/GEN7i to Windows 10.

Tool to extract the GEN3i/GEN7i Service from the installed version of Perception. After a fresh install of the Windows OS, the GEN3i/GEN7i service is missing and will be installed using this tool.

Perception CSI specifications

Perception CSI training specifications

This document describes what you need to create your own Perception CSI extensions.

Examples used in the CSI Programming User Manual

Perception Programming Interfaces Help file

Perception CSI Sheet template file for Visual Studio 2017 and later

Perception CSI script action template file for Visual Studio 2017 and later

User manual Perception CSI programming

Perception CSI 64-bit Windows Installer

Perception CSI Windows Installer

Perception CSI: Sensor Barcode Reader - HOTnote

Perception CSI: Seismic Measurement - HOTnote

Demo files which can be used by the Perception Word Organizer

User manual Harmonic Analysis Sheet

User manual Time Markers Sheet

User manual Calculator Sheet

User manual Word Organizer

User manual Log File Reader

Calculates and displays statistical information of recorded data. Alarm levels can be used to color individual calculated results

Shows all time markers including triggers in a table. Can be used for navigating in Perception Display to specific trigger.

Calculate the amplitude of the harmonic components of a periodic signal using the Fourier series.

Reading back Perception Logged data into a Perception User Table. The data can be filtered and the layout can be adjusted

Create a new Word or PDF report by assemble existing Word documents generated during a recording. Also bitmaps or richtext files can be added

Sheet works with Perception 8 or later and explains the working of the STL formulas. The sheet can be used to verify the STL calculations on user data.

Perception RPC using DIAdem

LabView source code of the Perception remote control Demo

LabView Demo program using the Perception RPC interface

Installer of the RPC COM wrapper and RPC documentation

Simple Perception RPC demo program

C# source code of the Perception RPC Demo

Perception RPC using MATLAB example code

Programming Help file Perception RPC/COM interfaces

C# source code for the Perception RPC ePower demo program

Simple Perception RPC ePower demo program

Simple Perception RPC ePower demo program

Installer of the RPC COM wrapper and RPC documentation

Installer of the RPC COM wrapper and RPC documentation

Installer of the RPC COM wrapper and RPC documentation

Installer of the RPC COM wrapper and RPC documentation

PNRF Reader User manual

PNRF Reader Example manual on how to read PNRF data files into MATLAB

PNRF Reader Training material documentation and code examples

PNRF Reader Software installation to read the proprietary PNRF (Perception Native Recording File) file format.

PNRF Reader Software installation to read the proprietary PNRF (Perception Native Recording File) file format.

PNRF Reader Software installation to read the proprietary PNRF (Perception Native Recording File) file format.

PNRF Reader Software installation to read the proprietary PNRF (Perception Native Recording File) file format.

PNRF Reader Software installation to read the proprietary PNRF (Perception Native Recording File) file format.

PNRF Reader Installation

PNRF Reader Export additional tool

PNRF Reader Export additional tool

PNRF Reader Installation

PNRF Reader Export additional tool

Archive containing examples, help file and required source code for the ‘C’ interface.

Running the install will copy all examples, help files and source code available for the GEN DAQ API to the PC. The install contains files for both the .NET and ‘C’ interface. The files will be installed to: C:\GEN DAQ API.

GPL file for GEN3t/GEN7tA/GEN17tA/GEN2tB Data Acquisition Systems

FLOSS (Free Libre & Open Source Software) description of the Genesis software stack

GPL file for GEN3t/GEN7tA/GEN17tA/GEN2tB Data Acquisition Systems

GPL file for GEN3t/GEN7tA/GEN17tA/GEN2tB Data Acquisition Systems

FLOSS (Free Libre & Open Source Software) description of the Genesis software stack

GPL file for GEN3t/GEN7tA/GEN17tA/GEN2tB Data Acquisition Systems

FLOSS (Free Libre & Open Source Software) description of the Genesis software stack

FLOSS (Free Libre & Open Source Software) description of the Genesis software stack

Percepction ApprovedList 8.72.24285

Percepction ApprovedList 8.80.25056