DY Strain Gauges with 2 Parallel Measuring Grids for Measurements on Bending Beams

DY strain gauges have two measuring grids arranged parallel to each other. Typical applications for these strain gauges (SGs) include measurements on bending beams.

With types DY1 and DY4 we offer you strain gauges (SG) in various geometries and sizes, each available with temperature responses adapted to the following materials:

  • Ferritic steel (10.8 ppm/K; 6.0 ppm/°F); temperature matching code: 1
  • Aluminum (23 ppm/K; 12.8 ppm/°F); temperature matching code: 3
  • Austenitic steel (16 ppm/K, 8.9 ppm/°F); temperature matching code: 5
  • Silica/composite (0,5 ppm/K; 0.3 ppm/°F); temperature matching code: 6
  • Titanium and gray cast iron (9 ppm/K; 5.0 ppm/°F); temperature matching code: 7
  • Plastic (65 ppm/K; 36.1 ppm/°F); temperature matching code: 8
  • Molybdenum (5.4 ppm/K; 3.0 ppm/°F); temperature matching code: 9

Insert the temperature matching code in place of the placeholder “x” to get the ordering number of the strain gauge you need. Strain gauges marked with a # symbol are only available matched to aluminum, ferritic and austenitic steel

Save time and efforts: DY4 strain gauges are available as pre-wired versions with connection cable

Strain gauges available in 350 Ohms

Measuring grid consists of constantan, measuring grid carrier is polymide

Fast delivery for preferred strain gauge types -  available from stock! 

 

>

 

Ordering number 

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals

Preferred types

Measuring grid

Carrier

[Ω]

a

b

c

d


 

1-DY1x-3/350

350

3
0.018

2.7
0.106

9
0.354

8
0.315

LS7

1, 3

Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

1-DY1x-6/350
 

350

6
0.236

3.2
0.126

12.5
0.492

9.4
0.370

LS7

1, 3

Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

 

 

Ordering number

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not compulsory

Preferred types

Measuring grid

Carrier

[Ω]

a

b

c

d

 

1-DY4x-1.5/350#

350

1.5
0.059

1.8
0.071

5.5
0.217
6
0.236
LS71
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

1-DY4x-3/350  

350

3
0.118

2.7
0.106
8.2
0.323
8
0.315
LS71,3
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

1-DY4x-6/350 

350

6
0.236

3.2
0.126
10.7
0.421
9
0.354
LS71
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

 

Related Products

Accessoires de jauges
HBM propose une large gamme d'accessoires nécessaires à une bonne installation et utilisation des jauges de contrainte pour mesurer la déformation.
Prestation Jauges de contrainte
Vous devez réaliser des mesures avec des jauges de contrainte mais vous ne savez pas comment les instrumenter ? Notre service support le fait pour vous !
QuantumX MX1615B/MX1616B
Le MX1615B est un amplificateur de mesure pour le raccordement de 16 capteurs ou pont de jauges en pont complet, demi-pont ou quart de pont.
HBMshop Voir les prix et disponibilités des produits. Et obtenez instantanément une offre.
Demande d'offre

Demande auprès de HBM

Merci de m'envoyer :


Envoyer votre demande

Demande auprès de HBM

Merci de m'envoyer :


Envoyer votre demande

Votre offre individuelle

Conseiller technique

Réponse rapide de notre ingénieur de vente