Scheda di Ingresso per Alte Tensioni ISO da 2 MS/s (GN610B)
The isolated balanced differential input offers voltage ranges from ± 10 mV to ± 1000 V, a 7-pole Bessel and Butterworth analog antialiasing filter, user-selectable digital Bessel, Butterworth and Elliptic IIR filters and an 18 bit Analog-to-Digital converter operating at up to 2 MS/s.
Tested up to 6.4 kV, the reinforced isolation allows for safe measurements up to 600 V RMS CAT II (IEC61010-1:2010 safety standard). The two timer counters together with the GEN series mainframe Digital Event/Timer Counter connector and the G070A torque/RPM adapter allow for direct interfacing to HBM torque transducers or other torque and speed sensors.
Besides the instantaneous values, the realtime cycle detection allows for cycle based real-time calculations like TrueRMS on all analog channels as well as torque, angle and speed on all timer counter channels simultaneously.
The real-time formula database calculators option offers an extensive set of math routines to solve almost any real-time mathematical challenge like obtaining mechanical power and/or multi-phase (not limited to three) electric power (P, Q, S) or even efficiency calculations. Every calculated result either from the real-time cycle based calculators or the real-time formula database calculators can be used to trigger the recording.
- 6 analog channels
- Isolated, balanced differential inputs
- ± 10 mV to ± 1000 V input range
- 600 V RMS CAT II reinforced isolation, tested up to 6.4 kV
- User-selectable digital Bessel, Butterworth and Elliptic filters
- 2 MS/s sample rate
- 18 bit resolution
- 2 GB memory
- 4 mm banana connectors
- Real-time cycle based calculators
- Real-time formula database calculators (option)
- Triggering on real-time result
- Digital Event/Timer/Counter support
|Titolo / Descrizione||Lingua||Prodotti||Lingua||Tipi di contenuto|
|GEN Series GN610B - Data Sheet||Multi lingua|
|eDrive testing - Brochure||Italian|
|eDrive testing - Brochure||Chinese|
|eDrive testing - Brochure||Japanese|
|eDrive testing - Brochure||French|
|Genesis High Speed - Brochure||Multi lingua|
|Genesis High Speed - Brochure||Portuguese|
|Genesis High Speed - Brochure (US)||English (US)|
|Genesis High Speed - Broschüre||German|
|GEN Series - GN610B/GN611B to Current Transducer Cabling||English|
|Calibration and Verification Software Version 2.98 GEN series - User Manual||Multi lingua|
|GEN series Calibration Kit - Data Sheet||Multi lingua|
GEN Series GN610(B) / GN611(B) - Tech Note
Tech Note - Isolation and type testing of the GEN series 1 kV input cards GN610(B) and GN611(B)