Pacchetti completi per le misurazioni dinamiche con 8 o 16 canali e frequenze di campionamento fino a 500 kS/s per canale
I due pacchetti completi con 8 o 16 canali sono disponibili per tutti i tipi di misurazioni meccaniche con estensimetri o altri trasduttori, come IEPE, termocoppie, Ptxx ecc. Ogni canale può essere configurato singolarmente per un diverso sensore e registrato con risoluzione a 24 bit e frequenza di campionamento di 500 kS/s. I dati sono memorizzati su un PC collegato o, in modo indipendente, su un SSD integrato. Pertanto, il sistema può anche essere usato in modo completamente indipendente da un PC, ad es. nei test sui veicoli o nelle applicazioni di risoluzione dei problemi. Una volta configurati, le misure sono memorizzate sull'hard disk interno controllato da trigger. Grazie al server di dati integrato, i dati memorizzati possono essere quindi facilmente recuperati con un browser e senza software particolari.
Il software Perception è compreso nella dotazione e consente una regolazione del dispositivo e una valutazione dei dati memorizzati. Sono disponibili funzioni di esportazione, ad es. su Excel, DIAdem e MATLAB. Inoltre, il software Perception offre funzioni potenti, come il video playback ad alta velocità, un database del sensore, FFT o un database di formule.
Misurazioni con estensimetro con HBM
- Errore statico massimo (MSE) 0.003% FS ± 3 μV
- quarter/half/full bridge
- tecnologia con 3-7 conduttori
- resistori supplementari da 120 e 350 ohm
- alimentazione da 1 V a 10 V, bipolare
- resistore shunt integrato
Universali e rapidi
- 8 o 16 canali
- 500 kS/s per canale a 24 bit
- Supporta tutti i DMS, IEPE, MEMS, Charge, 4-20mA
- Misurazioni della temperatura con termocoppia e Ptxx
- Supporto TEDS
Una soluzione completa
- Robusta, piccola, portatile
- Basta collegare il PC, installare il software e iniziare la misurazione
- Misure stand-alone sull'hard disk integrato
- È possibile collegare a cascata più dispositivi
- Con software Perception
Applicazioni tipiche
- Test di caduta
- Misurazioni rapide con estensimetri
- Misurazioni dinamiche della forza
- Prove d'impatto
- Balistica
- Split Hopkinson Bar
- Galleria del vento
- Test di separazione razzi
- Prove strutturali e di durata
- Prova "chicken gun" sugli aerei
- ... e tutti gli altri test meccanici dinamici
Documentazione tecnica
Titolo / Descrizione | Lingua | Prodotti | Lingua | Tipi di contenuto |
---|---|---|---|---|
Prospetti tecnici | ||||
GEN series GN840B, GN1640B - Caractéristiques techniques | French | |||
GEN series GN840B, GN1640B - Datenblatt | German | |||
GEN series GN840B, GN1640B - Hoja de características | Spanish | |||
GEN series GN840B, GN1640B - Prospetto dati | Italian | |||
GEN series GN840B, GN1640B - 데이터 시트 | Korean | |||
GEN series GN840B, GN1640B - Data Sheet | English | |||
GEN series GN840B, GN1640B - データシート | Japanese | |||
GEN series GN840B, GN1640B - 数据表 | Chinese | |||
GEN2TB - Caractéristiques technique | French | |||
GEN2tB - Data Sheet | English | |||
GEN2tB - Datenblatt | German | |||
GEN2TB - Hoja de caracerísticas | Spanish | |||
GEN2TB - Prospetto dati | Italian | |||
GEN2TB - 데이터 시트 | Korean | |||
GEN2TB - データシート | Japanese | |||
GEN2TB - 數據表 | Chinese | |||
Brochures | ||||
eDrive Power Analyzer Family Overview - Brochure | English | |||
eDrive Power Analyzer Family Overview - Brochure | French | |||
eDrive Power Analyzer Family Overview - Broschüre | German | |||
eDrive Power Analyzer Family Overview - Folheto | Portuguese | |||
eDrive Power Analyzer Family Overview - Folleto | Spanish | |||
eDrive Power Analyzer Family Overview - Opuscolo | Italian | |||
eDrive Power Analyzer Family Overview - 브로셔 | Korean | |||
eDrive Power Analyzer Family Overview - ブローシャー | Japanese | |||
eDrive Power Analyzer Family Overview - 小冊 | Chinese | |||
eDrive testing - Brochure | French | |||
eDrive Testing - Brochure | English | |||
eDrive Testing - Broschüre | German | |||
eDrive testing - Opuscolo | Italian | |||
eDrive testing - ブローシャー | Japanese | |||
eDrive testing - 小冊 | Chinese | |||
Genesis High Speed - Brochure (US) | English (US) | |||
Genesis High Speed - Folheto | Portuguese | |||
Genesis HighSpeed - Brochure | English | |||
Genesis HighSpeed - Broschüre | German | |||
Genesis HighSpeed - 小冊 | Chinese | |||
Manuali operativi | ||||
GEN2tB - User manual | English | |||
Guida rapida - Manuale | ||||
KAB2139 - Guida rapida | English, German, Spanish, French, Italian, Portuguese, Chinese, Japanese, Korean | |||
Accessori | ||||
GEN series G070A - Caractéristiques technique | French | |||
GEN series G070A - Data Sheet | English | |||
GEN series G070A - Datenblatt | German | |||
GEN series G070A - Hoja de especificaciones | Spanish | |||
GEN series G070A - Prospetto dati | Italian | |||
GEN series G070A - 데이터 시트 | Korean | |||
GEN series G070A - データシート | Japanese | |||
GEN series G070A - 数据表 | Chinese | |||
GEN series G072 - Data Sheet | English | |||
GEN2tB Wireless Control - Technical Information | English | |||
HV Impulse Attenuator - Data Sheet | English | |||
KAB433 breakout cable - Data Sheet | English | |||
Istruzioni di sicurezza | ||||
GENseries - Safety Instructions | English, German, French, Portuguese, Chinese, Japanese, Korean, Russian | |||
Declaration of Conformity | ||||
1-KAB, K-KAB (cable)- Dichiarazione ue di Conformitá | Multi lingua | |||
GEN series - Dichiarazione UE di conformitá | Multi lingua | |||
Altro | ||||
Calibration and Verification Software Version 4.00 GEN series - User Manual | English | |||
GEN series Calibration Kit - Data Sheet | English | |||
Software | ||||
GENDAQ API v3
GENDAQ API v3 for Perception V7.40, V7.50 and V7.60 Date: 01/2019 | Size: 6 MB | Multi lingua | |||
Hardware Peripheral Update Package
Update HBM approved GEN DAQ hardware peripherals. For example allowing new types of (solid state) drives. Date: 07/2022 | Version: 8.28.22200 | Size: 5 MB | Multi lingua | |||
Hardware Peripheral Update Package
Update HBM approved GEN DAQ hardware peripherals. For example allowing new types of (solid state) drives. Date: 09/2023 | Version: 8.54.23248 | Size: 6 MB | Multi lingua | |||
Perception COM-RPC
Installer of the RPC COM wrapper and RPC documentation Date: 09/2023 | Version: 8.54 | Size: 5 MB | Multi lingua | |||
Perception Software 64-bit
Perception 8.50 This is a major release of Perception. Due to the fixes in Perception 8.52, please download Perception 8.52 instead of Perception 8.50. New Features: • Continuous Output • RTFDB processing on CAN signal • Harmonic Analysis Display Improvements • Change from relative addressing to absolute addressing NOTE: With this change. The user already using a setup and using the old relative addressing may have to change their setup. Date: 07/2023
|
Version: 8.50.23184
|
Size: 665 MB
| Multi lingua | |||
Perception Software 64-bit
Perception 8.60 This is a major release of Perception. Fixes:: Averaging in Spectral Display always Peak hold average In the Perception Spectral display, the averaging was always peak-hold rather than the selected linear or exponential. This issue is fixed such that now the proper averaging is done. Fundamental calculation issue on RT-FDB A problem with cross-board cycle signals used for doing fundamental calculations was solved. Change of conditional Start/Stop time does not work during the recording In Perception it is possible to conditionally start or stop a recording. Up until now it was possible to change the conditions during a recording which might lead to unexpected or undefined situations. In this release it is no longer possible to change conditions during a recording such that the conditions are always well-defined. Graphical problem in Report sheet tables in Perception A problem with columns width when automatically generating a report was solved. User defined display color is not permanent stored User-defined colors are now stored as part of the PC settings. Switching display mode to ReviewSweep does show the full recording instead sweep A problem with switching between Review and ReviewSweep in the time display was solved. Using macro function auto scale active display y-axis is takes only action on first page of the display The macro function auto scale active display y-axis now works on all pages of a display. The format of the displayed value in a marker does not reflect the format set in Properties for the marker A small formatting discrepancy between marker field and the properties of a marker was solved. Suppress overrange drawing does not work as expected Some related issues concerning drawing or suppressing overrange data where solved. Trace marker not connected to trace line A trace marker is now always connected to a trace. Load Settings menu option doesn't load workbench settings completely A problem with incomplete loading of working bench settings was solved. Apply a Thermocouple type C sensor, Perception shows type B A thermocouple type C sensor is now shown as such. Redo an existing Experiment and load existing Experiment data does not include data On opening Perception and selecting 'Redo an existing experiment and load existing experiment data', the data was not always loaded. This problem is solved. Recordings got locked up by Perception When a recording is finished, it is unlocked and can be accessed by other software. Sometimes the recording was not unlocked and this problem is now solved.
No MDF4 file when exporting using automated processing The problem of a missing MDF4 file when exporting using automated processing was solved. Sluggish behavior when loading a virtual workbench In some case, Perception could react in a sluggish manner when loading a virtual workbench. This problem is solved.
NEW Features: Add hardware settings to a recording stored on a mainframe Up until now, when a recording was made by storing all the data directly on the internal disk of each mainframe (as opposed to storing all or some of the data on PC), the hardware settings of each mainframe were not available in the recording. In the new release, it is possible to include the hardware settings of a mainframe in the recording written to the mainframe's internal disk, in order to know exactly how a recording was made. Automatic merge of mainframe data In the GHS/Perception system, it is possible, and sometimes necessary, to store a recording partially or completely on the internal disc of a GHS mainframe. In this release it has been made possible to automatically merge the different parts of a recording into a single recording file on a PC. An additional improvement in this context is that the speed of transferring a recording from a mainframe to the PC was increased by a factor 2. Rework of the Spectral Display including new features such as:
In the Measurement Uncertainty sheet, support for new hardware was added The measurement uncertainty (MU) of a measurement depends on the properties of the used hardware (sensors, acquisition cards, etc.) which should be incorporated in the MU calculations. In the Measurement Uncertainty sheet, support was added for the T12 w-version torque sensor (but not yet for the minimal torque value of 100Nm). Furthermore, support for the GN610B/GN611B acquisition card was added, as well as support for burden resistors to allow for measuring both voltages and currents with those cards. Allow publishing any value on the fieldbuses in case of an invalid signal Since not all external systems can easily handle NaN, it is now possible to select a user-defined value to publish when a signal is not valid. Allow triggering of signals in Live display based on cycles: In the Live display in Perception, signals are often not stable but 'running', just like in an oscilloscope that is not triggered. In the new release, it is possible to trigger signals based on cycle signals. Periodic signals related to a selected cycle signal will then be stable in the Live display. NEW ePower Suite Features:: Using field bus signals, allow easy detection if a setup is in steady-state A setpoint of an eDrive setup (e.g., the efficiency for a certain torque/speed combination), is commonly measured when a system is in steady-state. In the new release, additional RTFDB functions can be instantiated by the ePower suite which, for a number of relevant signals, determine the mean and standard deviation. The user can determine how the samples to determine if mean and standard deviation are selected in terms of a specified number of samples or as a time interval. NEW Features for Hardware:: XCP over Ethernet This is the first major release which will support “XCP Over Ethernet” in our mainframes. This release supports the functionality of “XCP Over Ethernet – Output” which means data from the mainframe (slave) can be read by the master via XCP. In Perception, Real time data -> Publishing , a new column “Publish to XCP over Ethernet” will be available to allow publishing like existing fieldbus. For generating the A2L file, “Save A2L file as…” button is available. Known Limitations for 8.60 release:
Mainframe control via EtherCAT PDO This is the first major release which will allow mainframe control via EtherCAT PDO. On EtherCAT, several communication protocols are available. Up until now, GHS provided Remote Control via EtherCAT CoE (CAN over EtherCAT), but only SDO as the supported mechanism. From this release onwards, PDO will be supported as well. FieldBus Remote Control documentation may be referred for more information on the available commands and how to use them and return code description. Improvements in Perception :: Modernized the look-and-feel of Perception Many of the icons and graphics were updated to give a more modern look-and-feel and to improve usability. Prevent large MatLab/MDF4 export files due to asynchronous signals In the new release, when exporting signals from Perception to Matlab or MDF4, it is now possible to export asynchronous signals as asynchronous signals, or resampled at a lower user-defined sample rate leading to significantly smaller file sizes for those formats. Improve how a user can see and print the hardware settings from a recording Up until now, hardware settings of a recording could be printed by loading a recording as Active, and then selecting Settings. Two additional entries are shown in the Print sub menu to make this easier: 'Settings from active recording...' and ' Settings from current settings...' . Report CAN signal definition errors in Perception: When a wrong definition of the setup of CAN channels is provided, Perception now gives an error message such that the setup can be corrected. Add key-mouse combination for temporarily grouping of cursors: Currently the user has the option to group/ungroup cursors by pushing a button in the menu bar. To improve usability it is now possible to press the Alt-key, drag one of the cursors and the related cursors will move as a group. This works for horizontal, vertical and slope cursors. Improvements for Hardware:: Allow for unsigned/signed 16-bit CAN inputs Next to 32-bit and 64-bit signed and unsigned CAN signals, we now also allow for 16-bit signed and unsigned CAN input signals. Allow integrating asynchronous samples Up until now, the IntegrateGated() function could only handle synchronous signals to be integrated (such as instantaneous electrical power) but not asynchronous signals which are used, for example, to describe the instantaneous mechanical power. From this release, this function can also handle asynchronous signals. Additional CAN sample rates In previous releases, all CAN input signals to a GHS mainframe were sampled at a rate of 100S/s. It is now possible to choose a different sample rate for each CAN recorder. When choosing a higher sample rate, the maximum number of allowed channels is reduced. The constraint is that the sum, over all CAN recorders, of the product of the sample rate and the number of channels should be lower than 100,000. Some feasible examples are as follows:
Date: 01/2024
|
Version: 8.60
|
Size: 769 MB
| Multi lingua | |||
Perception Software 64-bit
Perception 8.54 This is a minor release of Perception. Due to the fixes, please download this release instead of Perception 8.52. Various stability and performance enhancements implemented, see release notes for details. NOTE: With this change. The user already using a setup and using the old relative addressing may have to change their setup. Date: 09/2023
|
Version: 8.54.23248
|
Size: 732 MB
| Multi lingua | |||
Perception Software 64-bit
Perception 8.52 This is a minor release of Perception. Due to the fixes, please download this release instead of Perception 8.50 Fixes: No special license for RTFDB on CAN inputs: Perception 8.50 requires a special license to allow processing CAN signals in the RTFDB. This feature is free of charge for customers within Perception maintenance, so it licensing is no longer required. CAN bus stopped unexpectedly A problem is solved where the CAN bus stopped unexpectedly. New type of Peak CAN dongle was not accepted Peak provides the USB CAN dongle with different internal chip sets. The updated Peak dongles are now also recognized and can be used. NaN in log file when doing processing When using one of the FDB functions (CycleFundamental) the output may give NaN. This problem is solved. Freeze when duplicating signals for automated recording processing The system is made robust against selecting the same signal multiple times when doing automated recording post-processing. New Features: Continuous Output
RTFDB processing on CAN signal:
Since some RTFDB functions can generate triggers, this also makes it possible to generate triggers based on CAN signals. Harmonic Analysis Display Improvements:
Change from relative addressing to absolute addressing:
NOTE: With this change. The user already using a setup and using the old relative addressing may have to change their setup Date: 07/2023 | Version: 8.52.23198 | Size: 727 MB | Multi lingua | |||
Perception Software 64-bit
Perception 8.28 This is an minor release of Perception mainly improving stability, fixing known problems and adding minor new features. This is not shipped out with the hardware but only available via web download. Details about fixed issues and new features can be found in the release notes. Note: Perception includes the instruments firmware for GEN DAQ systems. So there is no separate firmware available for GEN DAQ systems. When you connect to hardware using a new version of Perception, the firmware in the hardware will be upgraded accordingly to the same release level. Date: 07/2022 | Version: 8.28.22200 | Size: 602 MB | Multi lingua | |||