Connection Boards (AP) for MGCplus

For Single-channel Amplifiers

AP01i Universal Connection Board

  • TEDS Transducer identification
  • Transducer connection: D-sub socket 15-pin
  • Connection for output signal: D-sub socket 25-pin
  • Width: 4 divs

AP03i Universal connection board

  • TEDS Transducer identification
  • Transducer connection: Amphenol 7-pin
  • Connection for output signal: D-sub socket 25-pin
  • Width: 8 divs

AP07/1 Connection board for torque shafts T3...FN and T10F

  • Transducer connection: Amphenol 7-pin
  • Connection for output signal: D-sub socket 25-pin
  • Usable with amplifier type ML60B
  • Width: 8 divs

AP13i Universal connection board with control inputs and outputs for 24 V level (electrically isolated)

  • TEDS Transducer identification
  • Transducer connection: D-sub socket 15-pin Connection
  • for output signal: D-sub socket 25-pin
  • Width: 4 divs

AP14 Connection board for strain gauges (in full, half and quarter bridges with internal completion resistors 120 Ohm, 350 Ohm and 700 Ohm)

  • Transducer connection: D-sub socket 15-pin
  • Connection for output signal: D-sub socket 25-pin
  • Width: 4 divs

AP17 Connection board incl. supply voltage for torque meters T10F...

  • Transducer connection: D-sub socket 15-pin
  • Connection for output signal: D-sub socket 25-pin
  • Usable with amplifier type ML60B
  • Width: 4 divs

AP18i Connection board for current-fed piezoelectric transducers (IEPE)

  • TEDS Transducer identification
  • Transducer supply: 2.5 to 20 mA (adjustable) 4 mA (default); input voltage range: 12±9V (3...21V)
  • Transducer connection: BNC connector
  • Connection for output signal: D-sub socket 25-pin
  • Usable with amplifier type ML01B and ML10B
  • Width: 4 divs

For Multi-channel Amplifiers

AP402i 4 channel connection board for voltages (±1 V, ±10 V, ±60 V) and currents (±20 mA)

  • TEDS Transducer identification
  • Supply voltage for active transducers can be chosen by jumpers: +5V, +8V, +16V
  • Max. 1 A for external sensor supply Electrical isolation typ. 500 V
  • Transducer connection: Lemo-FCG6 socket
  • Usable with amplifier type ML801B (up to 2 AP402i per ML801B)
  • Width: 4 divs

AP409 4 channel connection board for thermocouples, input types K, J or T

  • Each channel electrically isolated
  • Transducer connection: miniature thermocouple sockets
  • Usable with amplifier type ML801B (up to 2 AP409 per ML801B)
  • Width: 4 divs

AP418i 4-channel connection board for current-fed piezoelectric transducers

  • TEDS Transducer identification
  • Transducer connection: BNC connector
  • Usable with amplifier type ML801B (up to 2 AP418i per ML801B)
  • Width: 4 divs

AP455i 4 channel connection board for strain gauge and inductive transducers in half and full bridge circuit (carrier frequency) and LVDT

  • TEDS Transducer identification
  • Transducer connection: D-sub socket 15-pin
  • Usable with amplifier type ML455B
  • Width: 8 divs

AP455iS6 4-channel connection board for strain gauge and inductive transducers in half and full bridge circuit (carrier frequency) and LVDT

  • TEDS Transducer identification
  • Transducer connection: Lemo-FCG6 socket
  • Usable with amplifier type ML455B
  • Width: 4 divs

AP460i 4 channel connection board for frequency counting (up to 500 kHz), pulse counting, pulse duration measurement and pulse width demodulation

  • TEDS Transducer identification
  • Transducer connection: Lemosa socket 10-pin
  • Usable with amplifier type ML460
  • Width: 4 divs

AP801 8 channel connection board for voltages (±10V)

  • Connection of transducers: plugable screw terminals
  • Usable with amplifier type ML801B
  • Width: 4 divs

AP801S6 8 channel connection board for voltages (±10 V) with transducer supply 8/16 V

  • Max. 1 A for external sensor supply, max. 150 mA per slot
  • Transducer connection: Lemo socket 4-pin
  • Usable with amplifier type ML801B
  • Width: 4 divs

AP809 8 channel connection board for thermocouples, input types K, J or T with broken wire detection

  • Transducer connection: miniature thermocouple sockets
  • Usable with amplifier type ML801B
  • Width: 4 divs

AP810i channel connection board for strain gauge transducers in half and full bridge circuit (DC)

  • TEDS Transducer identification
  • Transducer connection: 2 D-sub sockets 25-pin
  • Usable with amplifier type ML801B
  • Width: 4 divs

AP814Bi 8 channel connection board for strain gauges (in quarter bridges (3-wire circuit) with internal completion resistors 120 Ohm, 350 Ohm and 700 Ohm)

  • TEDS Transducer identification
  • Transducer connection: 2 D-sub sockets 25-pin
  • Usable with amplifier type ML801B
  • Width: 4 divs

AP815i 8 channel connection board for strain gauges (4-wire circuit) with internal completion resistors 120 Ohm, 350 Ohm and 700 Ohm)

  • TEDS Transducer identification
  • Transducer connection: 2 D-sub sockets 25-pin
  • Usable with amplifier type ML801B
  • Width: 4 divs

AP835 8 channel connection board for resistance thermometers Pt100

  • Transducer connection: Lemo socket 4-pin
  • Usable with amplifier type ML801B
  • Width: 4 divs

AP836i channel connection board for potentiometric transducers and voltages (±10 V)

  • TEDS Transducer identification
  • Transducer connection: 2 D-sub sockets 25-pin
  • Usable with amplifier type ML801B
  • Width: 4 divs

For Special-function Modules

AP71 Connection board for 2 CAN buses

  • Connection: D-sub socket 9-pin
  • Usable with module type ML70B and ML71B
  • Width: 4 divs

AP74 Connection board for up to 12 CANHEAD modules

  • Connection of the CANHEAD modules: DeviceNet M12 plug
  • Usable with module type ML74B
  • Width: 4 divs

AP75 Connection board with 8 digital inputs/outputs (24V) and 2 analog outputs (±10V)

  • Connection: plugable screw terminals
  • Usable with module type ML70B and ML78B (up to 2 AP75 per module)
  • Width: 4 divs

AP77 Connection board for PROFIBUS DP

  • Connection: D-sub socket 9-pin
  • Usable with module type ML77B
  • Width: 4 divs

AP78 Connection board with 10 analog outputs (±10V), thereof 2 filterable (ML78B)

  • Connection: D-sub socket 25-pin
  • Usable with module type ML70B and ML78B, combinable with AP75
  • Width: 4 divs

見積もり希望

こちらからお気軽に見積依頼

ご希望内容:


問い合わせる

こちらからお気軽に見積依頼

ご希望内容:


問い合わせる

柔軟な対応力

技術コンサルティング

速やかな対応