Reliable

  • Withstands elevated temperatures from -50°C up to +250°C (short time 300°C). 
  • 4-wire configuration

LS31HT: Weldable Strain Gauge for Rough Environments and High Temperatures

The LS31HT is a weldable strain gauge to be spot welded to steel structures and materials. It is ideal to be used "on site", when the cleanliness required for gluing cannot be guaranteed, for example on construction sites or in production plants, withstanding hazardous conditions. Such conditions would likely damage the adhesive bond of conventional strain gauges. The LS31 strain gauge is mounted by a simple spot welding process that requires little practice. It is fitted with 0.5-mm stranded connection wires. 

Typical applications for LS31HT include the mechanical load analysis on bridges, piles, tunnels, buildings, pipelines, wind power plants, and tanks. 

We recommend using the Heller C33 spot welder to install weldable strain gauges.

Robust

  • Comes on a carrier plate covered with red silicone rubber to be spot welded

Withstands harsher operating conditions

Simple to install

  • Easily mounted by simple spot welding method that requires hardly any preparation

Long service life with a permanent attachment to the structure

Reliable

  • Withstands elevated temperatures from -50°C up to +250°C (short time 300°C). 
  • 4-wire configuration

Reliable

  • Withstands elevated temperatures from -50°C up to +250°C (short time 300°C). 
  • 4-wire configuration

Accurate results under harsh conditions or environments

 

 

 

 

Dimensions [mm/inch]

 
 

Ordering
number

Nominal
(rated)
resistance

Measuring
grid
width

Carrier

 

Maximum Excitation Voltage

  

Ω

b

c

d

 
 

1-LS31HT-6/350VE

HBMshop

350

2.8
0.11

40
1.575

10
0.394

15

Welding of strain gauges video

 

Product Literature

제목 / 설명언어
데이터 시트
German
English
Russian
사용 방법
French, German, English, Russian
French, German, English
Declaration of Conformity
English, German

Recommended for you

Impact of Spot Welded Strain Gauges to Materials
What influence do weldable strain gauges have on the base material? Extensive tests on our behalf should answer this question.
Welding or Bonding Strain Gauges?
Welding and bonding are the two primary techniques used to install strain gauges. But when to use which technique? We provide you with a checklist.
QuantumX MX1615B/MX1616B
16채널의 MX1615B/MX1616B 앰프는 풀, 하프, 쿼터브리지 스트레인 값을 정밀하고 안전하게 측정합니다.(120-1,000 Ohm)
세미나
HBM에서는 60년의 노하우를 바탕으로 측정, 계측 관련 전문적인 아카데미 교육, 세미나, 및 Webinar 를 제공합니다.
HBMshop See prices, availability and get an instant quote.
견적요청

HBM 영업팀과 Contact!

Please send me:


Start your inquiry

HBM 영업팀과 Contact!

Please send me:


Start your inquiry

Individual offer

Technical advice

Fast response