Exhibitions in the UK

EIS Instrumentation, Analysis & Testing Show

Tuesday 14th March 10am - 4pm

Being held at The Silverstone Wing - the prestigious exhibition and conference centre.   HBM will be showing the eDrive testing solution for the testing of electrical inverters and electrical machines; SomatXR data acquisition system specially developed for use in harsh environments and well suited to a variety of applications such as vehicle testing, stationary measurements and structural health monitoring together with some exciting dynamic models demonstrating HBM's analysis capabilities. 

Visit Greg Todd & Omer Mir on stands 51 & 52.

Entrance to the exhibition and open forums is free to visitors along with free car parking and complimentary refreshments.

Workshop of Electrical Machines Design, Control & Diagnosis

University of Nottingham - 20 & 21st April 2017

The aim of  WEMDCD 2017 is to give an insight into emerging new techniques related to electrical machines design, control and diagnosis. Industrial electrical machines remain a key component for modern systems using, producing or transforming electricity. HBM will be demonstrating our innovative eDrive testing solution for the testing of electrical inverters and electrical machines.

Greg Todd and Klaus Lang will be pleased to chat with you.

The Engineering Testing Show

The Roundhouse, Derby - Friday 2nd June 10am to 4.30pm

Catering to professional engineers across a wide range of disciplines and industrial sectors who share a professional interest in the practice of engineering testing, including  condition monitoring, test rigs, diagnostics & Non-Destructive Testing (NDT).

HBM will be show our QuantumX universal data acquisition systems and eDrive testing solution for testing of electrical inverters and electrical machines, together with nCode demonstrating their range of software for durability and fatigue.

Visit HBM & nCode on stand IR6 and chat to Omer Mir and Mark Embra.

Offshore Wind Energy show

ExCeL Centre, London - 6th to 8th June 2017

This show is ideal for professionals looking at new technologies in the offshore wind sector and is the world’s largest offshore wind conference and exhibition.

HBM will be showcasing our products and services for condition and structural health monitoring of wind turbine structures above and below the waterline.

Visit Richard Sargeant in the North hall, stand N-A14 to find out more.

The Automotive Testing show

Ricoh Arena, Coventry - 13th & 14th September 2017

Providing knowledge, innovation and networking, the Automotive Testing Show is the most complete automotive engineering technical event in the country. For anyone involved in vehicle, powertrain development, vehicle development, simulation, NVH, Software engineering, calibration or Controls this is the ideal show to visit. 

HBM will be showing the eDrive testing solution for effective analysing of electric machines and drives, together with our SoMat XR rugged & flexible data acquisition system specially developed for use in harsh environments and the QuantumX data acquisition range for reliable data acquisition of your test & measurement needs.

Visit Greg Todd & Omer Mir on the HBM Test & Measurement stand 134

US Trade Shows

Motor & Drive Systems – HBM Test & Measurement, Booth 400

January 18-19, 2017 – Orlando, FL – Rosen Plaza Hotel

The latest technical advancements impacting the design and integration of motor drive systems and hybrid/electric vehicles. HBM will demonstrate cost and time saving solutions over the typical power analyzer including accelerated electric motor and drive efficiency mapping, real-time custom analysis including Park Transformation, fast data transfer to automation systems plus high speed data recording of all electrical, mechanical and physical signals in a single mainframe.

MD&M West – HBM Weighing Technologies, Booth 1353

February 7-9, 2017 – Anaheim, CA – Anaheim Convention Center

The world’s largest annual medical technology event exhibiting every aspect of medical device development from concept to market. HBM will present custom sensor solutions, transducers, strain gauges, load cells, amplifiers and assemblies used in medical devices, dynamic weighing and scale applications.

SubSea TieBack – HBM Weighing Technologies, Booth 1035

March 21-23, 2017 – San Antonio, TX – Henry B. Gonzalez Convention Center

The world’s largest subsea event focusing on new solutions for global deep-water subsea operations to improve the quality, safety and economics of the subsea tieback industry. HBM will present custom sensor solutions, transducers, strain gauges, load pins, load cells, amplifiers and assemblies for improving subsea tieback operations.

ProMat – HBM Weighing Technologies, Booth S335

April 3-6, 2017 – Chicago, IL – McCormick Place

Discover the latest material handling solutions for manufacturing, distribution and supply chain equipment and systems. HBM will present custom sensor and transducer solutions, including load pins, load cells, strain gauges, torque sensors, amplifiers and assemblies used in static and dynamic measurements of loads, tensions, weighing, scales and material handling applications.

AMC Engineering Conference – HBM Test & Measurement / Weighing Technologies

April 25-27, 2017 – Waterloo, IA – Five Sullivan Brothers Convention Center

Specifically for agricultural and off-highway equipment design engineers. HBM will present the latest in rugged-mobile data acquisition solutions for use in harsh environments and state-of-the-art torque sensors for powertrain testing plus custom sensors, transducers, load cells, load pins, strain gauges and amplifiers.

Offshore Technology Conference – HBM Weighing Technologies, Booth 6424

May 1-4, 2017 – Houston, TX – NRG Park

The world's foremost event for the development of offshore resources in the fields of drilling, exploration, production and environmental protection. HBM will showcase custom sensor and transducer solutions including load cells, load pins, torque sensors and transducers, pressure sensors, strain gauges, amplifiers and assemblies used to measure static and dynamic loads and tensions in winches, hoisting gear, cranes and drill rigs.

MD&M East – HBM Weighing Technologies, Booth 1375

June 13-15, 2017 – New York, NY – Jacob K. Javits Convention Center

The industry's trusted resource for every aspect of medical device development. HBM will present custom sensor solutions, transducers, strain gauges, load cells, amplifiers and assemblies used in medical devices, dynamic weighing and scale applications.

Electric & Hybrid Vehicle Technology Expo – HBM Test and Measurement, Booth 1211

September 12-14, 2017 – Novi, MI – Suburban Collection Showplace

Premier showcase for electric and hybrid vehicle technology, highlighting advances in powertrains for passenger, commercial and off-highway industrial vehicles. HBM will demonstrate how to move well beyond the limited numerical results of a typical power analyzer using an innovative cost and time saving solution for rapid electric motor and drive efficiency mapping, offering high speed data recording of all electrical, mechanical and physical signals, real-time custom analysis and fast data transfer to automation systems.

Pack Expo International – HBM Weighing Technologies, Booth S7853

September 25-27, 2017 – Las Vegas, NV – Las Vegas Convention Center

Focusing on processing and packaging solutions.  Visit HBM's booth to see high accuracy custom sensors and transducers, digital and analog load cells, strain gauges, amplifiers, indicators, controls and open software for use in high speed dynamic weighing, check weighing, batching, filling, packaging and scale applications.

IEEE Energy Conversion Congress & Expo – HBM Test and Measurement, Booth 214

October 1-5, 2017 – Cincinnati, OH – Duke Energy Convention Center

The world’s leading technical conference and exposition for energy conversion solutions. HBM will demonstrate cost and time saving solutions over the typical power analyzer including accelerated electric motor and drive efficiency mapping, real-time custom analysis including Park Transformation, fast data transfer to automation systems plus high speed data recording of all electrical, mechanical and physical signals with over 50 power channels in a single mainframe.

Shock and Vibration Symposium – HBM Test & Measurement, Booth 101

October 16-18, 2017 – Jacksonville, FL – Hyatt Regency Jacksonville Riverfront

The leading forum for the structural dynamics and vibration community.  Visit the HBM booth to see the latest in shock and vibration testing solutions including DAQ hardware offering exceptional accuracy, scalability and data security plus extensive analysis software including Shock Response Spectrum (SRS), Extreme Response Spectrum (ERS) and Fatigue Damage Spectrum (FDS).

Automotive Testing & Engine Expo – HBM Test and Measurement, Booth 10017

October 24-26, 2017 – Novi, MI – Suburban Collection Showplace

Automotive's leading test technology event in the USA. Visit the HBM booth to see a wide variety of combustion and electric/hybrid automotive testing solutions including the latest in high-speed and rugged-mobile data acquisition (DAQ) solutions, cost and time saving power analyzer solutions for rapid electric motor and drive efficiency mapping, state-of-the-art transducers and torque sensors for powertrain testing plus software for durability testing and analysis.

The Assembly Show – HBM Weighing Technologies

October 24-26, 2017 – Rosemont, IL – Donald E. Stephens Convention Center

The industry's assembly trade show focusing on new assembly techniques, products and services. HBM will showcase custom sensor and transducer solutions including digital and analog load cells, torque sensors, pressure sensors, strain gauges, amplifiers, indicators, controls and open software for use in high speed dynamic weighing, check weighing, batching, filling, packaging and scale applications.

Related Pages

1:1 문의 이곳을 클릭하셔서 요청사항을 작성해 주세요