산업용 이더넷을 갖춘 DSE 로드셀 신호 컨디셔너 산업용 이더넷을 갖춘 DSE 로드셀 신호 컨디셔너 | HBM

DSE-HIE: 미래 경쟁력이 있고 EHEDG 기준에 적합한 센서 전자 제품

혁신적 디지털 센서 전자제품(DSE)는 매우 역동적이고 자동화된 칭량과 산업용 자동화 애플리케이션에 이상적입니다. 로드셀 및 포스 트랜스듀서 등 아날로그 방식 게이지 기반의 센서에서 전송되는 신호는 통합형 다중 프로토콜 장치를 통해 모든 일반 산업용 이더넷 프로토콜(PROFINET RT/IRT, EtherCAT 및 Modbus/TCP)에 따라 디지털화하고 출력할 수 있습니다. 센서에 근접한 간단한 설치와 이더넷 인터페이스를 통해 시간 효율적인 통합을 가능하게 합니다. 표준화된 CiA 461 명령 세트는 시스템 시동과 운용에 요구되는 시간을 추가 단축합니다. 직관적인 웹 인터페이스는 측정치의 매개변수화와 획득을 간편하게 해주어 추가적인 소프트웨어는 필요하지 않습니다.

The DSE is housed in a compact stainless-steel enclosure. Its hygienic EHEDG-compliant design allows its use in applications requiring the most stringent hygiene and cleanliness standards, such as in the food and beverages, pharmaceutical-, in industrial process- and factory  automation. Owing to its IP67/68/69K degree of protection, the device is optimally protected and can be cleaned with high-pressure cleaners or employing CIP (clean-in-place) systems.

Digitizing analog load cells

Free white paper

DSE는 컴팩트한 스테인리스 강철 외함 안에 있습니다. EHEDG 기준을 준수하는 위생적인 디자인을 갖춘 DSE는 식료품 및 의약품, 산업 공정, 공장 자동화 등 가장 철저한 위생, 청결 수준을 요구하는 애플리케이션에서도 사용될 수 있습니다. IP67/68/69K 보호 등급을 적용한 DSE는 최적으로 보호되며 고압 세척기 또는 CIP (제자리 세정) 시스템을 사용하여 세척할 수 있습니다.

위생적

  • IP67, IP68, IP69K 보호 등급(연결된 플러그를 통해서만)

  • EHEDG 기준 준수

  • ECOLAB 인증

위생 요구사항이 엄격한 구역 및 가혹한 산업 환경, 특히 저온 무균 애플리케이션에서 사용하는 경우

통신

  • 준비 중인 PROFINET, EtherCAT 및 Modbus/TCP에 대한 지원

  • TCP/IP를 사용하는 통합형, 직관적 웹 서버를 통해, 획득된 측정 데이터를 파마리터해 수집

  • 인터넷 스위치로 인하여, 데이지 체인(daisy-chaining) 배선에 최적화됨

현대적인 산업 환경을 위한 시간 절감형 플러그 앤 워크 솔루션

정확도

  • 10,000e에 달하는 측정 해상도로 정확도 최대화, 0.01%

  • 초당 2,000개 측정치

  • 정확한 측량 및 자동화 애플리케이션을 위한 통합형 필터

개조 및 새로운 시스템을 위한 최대 출력

새로운 제품 : 충전 공정, 선별, 검사기 및 컨테이너 계량을 위한 통합 알고리즘

프로세스 최적화: 새 프로세스 알고리즘은 통합DSE WebServer를 통해 쉽게 파라미터화할 수 있습니다. 알고리즘은 실시간으로 작동하여 기계 제어를 완화하며 최적의 결과를 보장합니다.

프로세스를 자세히 보고 기록하고, 통합 주파수 분석(FFT)을 통해 확인하고, 많은 표준 스케일, 필러, 중량 선별 응용 프로그램을 위한 알고리즘으로 프로세스를 최적화하세요.


위생적이고 견고함을 위해 – 애플리케이션을 위한 이상적인 측정 체인

중량 측정 전자 제품(matching electronics)이외에도, 포트폴리오는 청소가 용이하고 EHEDG-기준을 준수하는 로드셀을 제공합니다. 모듈 시스템은 액세서리 적용하여 단순하게 설치, 측정할 수 있습니다.

DSE 제품 사진

DSE 3D CAD STEP 파일

제품 CAD 파일 다운로드
DSE CAD step 파일

제품 자료

제목 / 설명언어
데이터 시트
DSE-HIE - 데이터 시트 Korean
DSE-HIE - 數據表 Chinese
DSE-HIE - Caractéristiques techniques French
DSE-HIE - Data Sheet English
DSE-HIE - Datenblatt German
DSE-HIE - Folha de dados Portuguese
DSE-HIE - Hoja de características Spanish
DSE-HIE - Prospetto dati Italian
DSE-HIE - データシート Japanese
사용 메뉴얼
DSE - Operating Manual English, German
Declaration of Conformity
DSE-HIE - EU Declaration of Conformity 다국어
Device Descriptions
DSE ESI-files (EtherCat)

DSE device description file for EtherCAT.

Date: 05/2023  |  Size: 2 KB

다국어
DSE GSDML file (ProfiNet)

DSE device description file for PROFINET RT and IRT.

Date: 05/2023  |  Size: 8 KB

다국어
펌웨어
DSE-HIE Firmware and WebServer

Archive including all current files for firmware and DSE WebServer.

To update firmware and WebServer the existing WebServer in the DSE-HIE can be used (no additional software or hardware needed).

Date: 05/2023  |  Version: 3.1.0  |  Size: 2 MB
Related Documents: Release Note

다국어
소프트웨어
Automation-API WINDOWS Library and Software-Example

The HBM Automation API (Application Programming Interface) is an opensource interface that allows to access the functionality of various devices via Ethernet, WTX110, WTX120 and DSE-HIE. This enables to quickly create own application programs optimally adapted to your applications.

It includes the links to download the API from GIT-HUB github.com/HBM/Automation-API , a detailed manual with How-To´s and Ready-made examples to get started in only minutes with MS-Visual-Studio, also an EXE-Example to connect and operate DSE and WTX devices without software-environment.

Legal notice: The code and example does not imply any warranty or guarantee.

Date: 02/2021  |  Version: 1.0  |  Size: 453 KB

다국어
DSE CAE data for ePLAN Electric P8

Macro-project containing CAE data for ePLAN Electric P8.

Date: 01/2021  |  Version: 1.0  |  Size: 22 MB

다국어
DSE Example Filler Project with Raspberry-PI PLC and codesys

This is a quick start guide for using the filler function of a DSE. This function serves the optimization and monitoring of processes. By means of a user-friendly interface, complicated control technology is available for every user. For initial commissioning, all you need is a computer, sensor and a DSE. This can be extended by a PLC, which takes over the values set in the DSE for fast and accurate control. In this example, a Raspberry PI Model 4B with Codesys as PLC is used with a PROFINET or EtherCAT interface. The functionality of the filler is available in DSE from the FW V2. 0.

Legal notice: This example does not imply any warranty or guarantee.

Date: 04/2022  |  Version: 1.0  |  Size: 55 MB

다국어
DSE Example Check-weigher Project with Raspberry-PI PLC and codesys

This is a quick start guide for setting up a checkweigher with the DSE (from FW 2. 0). The control scale can be controlled in two ways, on the one hand via a level and on the other via an external signal (in this example a pushbutton). The DSE has no hardware DIO’s, so the trigger signals are captured by a PLC and transmitted to the DSE, here a Raspberry Pi Model 4B with Codesys as PLC, with a PROFINET and EtherCAT interface.

Legal notice: This example does not imply any warranty or guarantee

Date: 04/2022  |  Version: 1.0  |  Size: 53 MB

다국어
DSE Example Checkweigher Project with Siemens PLC and TiA portal

This is a quick start guide for setting up a checkweigher with the DSE (from FW 2.0). The control scale can be controlled in two ways, on the one hand via a level and on the other via an external signal (in this example a pushbutton). The DSE has no hardware DIO’s, so the trigger signals are captured by a PLC and transmitted to the DSE, in this example by a Siemens S7-1200 PLC with TiA-portal, with a PROFINET interface.

Legal notice: This example does not imply any warranty or guarantee.

Date: 06/2022  |  Version: 1.0  |  Size: 5 MB

다국어
DSE Example Filler Project with Siemens PLC and TiA portal

This is a quick start guide for using the filler function of a DSE. This function serves the optimization and monitoring of processes. For initial commissioning, all you need is a computer, sensor and a DSE. This can be extended by a PLC, which takes over the values set in the DSE for fast and accurate control. In this example, a Siemens S7-1200 PLC with TiA-portal is used with a PROFINET interface. The functionality of the filler is available in DSE from the FW V2. 0.

Legal notice: This example does not imply any warranty or guarantee.

Date: 06/2022  |  Version: 1.0  |  Size: 6 MB

다국어
Ethernet Device Configuration Tool

Software tool for initial setting of the IP address for the DSE, as it has no default IP address in the delivery state.

Date: 06/2020  |  Version: 1.0  |  Size: 6 MB

다국어
Tech Notes
DSE Tech Notes

This is a collection of technical application reports for requirements around DSE.
They show a step-by-step solution up to the running project.
Available languages: English

  • DSE_EtherCAT-integration into Beckhoff-plc via TwinCAT
  • DSE_Profinet-integration into Siemens-plc via TiA-Portal
  • DSE protocol-change EtherCAT <> PROFINET without the DSE webserver

Legal notice: The examples given are intended to illustrate the solution and integration into DSE.
The examples do not imply any warranty or guarantee.

Date: 09/2022  |  Size: 3 MB

다국어
HBMshop See prices, availability and get an instant quote.