Picture: Tensile force measurement using C series strain gauges at low temperatures (permafrost)

Series C strain gauges (SGs) with 1 or 2 measuring grids are specially designed for use at extreme temperatures (-269 °C to +250 °C) and provide an adapted temperature response in the range from -200 °C to +250 °C. Series C strain gauges also feature flexible use and are therefore easy to work with.

Types LC1 and LC6 are linear strain gauges for strain measurements in one direction.

Type XC1 is a 0°/90° rosette for analyzing biaxial stress states with known principal strain direction.

Type RC1 is a 0°/45°/90° rosette for analyzing a biaxial stress state with unknown principal strain direction.

Series C strain gauges are available in nominal (rated) resistances of 120 and 350 ohms with different temperature responses adapted for steel or to customer specification.

The measuring grid consists of a special CrNi alloy; the material of the measuring grid carrier is polyimide.

Key Features

  • The specialist for extreme temperatures (-269...+250°C)
  • Temperature response with matching in the range of -200...+250°C
  • Flexible, therefore easy to handle
  • Material: Polyamide
  • Measuring grids: 1, 2, 3
  • Resistance (Ohm): 120, 350

Product Literature

HBMshop Bekijk de prijzen, beschikbaarheid en creër direct een offerte.

Vraag uw HBM Sales Engineer

Stuur mij:

Begin met uw aanvraag

Vraag uw HBM Sales Engineer

Stuur mij:

Begin met uw aanvraag

Uw aanbieding

Gratis technisch consultant

Snelle respons van onze gekwalificeerde sales engineer