LE11: Strain Gauge for Moisture and Chemical Environments

LE11 is an encapsulated strain gauge with IP67 degree of protection (in compliance with the chemical resistance of the adhesives). A stranded connection wire with Fluoropolymer insulation and 1 meter long is included in the scope of supply. The LE11 strain gauge is encapsulated in a special plastic material and is therefore moisture proof and resistant against chemicals (with the exception of highly concentrated acids such as sulfuric or nitric acid). LE11 comes with a 2-wire or 4-wire connection. The nominal (rated) resistance is 350 ohms and the temperature response is adapted for steel.

High degree of protection

  • IP67 protection
  • Full encapsulation in special plastic material
white check mark in green circle

Moisture proof and resistant against chemicals

Signal stability

  • Encapsulation with stranded wire
  • Stainless steel
  • Measuring grids: 3 mm
white check mark in green circle

Excellent zero signal stability with changing moisture.

Highly resistive

  • 1 m stranded connection wire with Fluoropolymer insulation
  • 2-wire or 4-wire circuit alternatively
white check mark in green circle

Resistance of wire material against environmental threats and electrical leakage.

LE11 Technical Features


 

Ordering number

Nominal (rated) resistance

Dimensions [mm/inch]

Vmax 

Measuring grid

Carrier

Ω

a

b

c

d

  

1-LE11-3/350Z
(2-wire circuit)

350

3
0.118
2
0.079
15
0.591
9
0.354
6

1-LE11-3/350V
(4-wire circuit)

350

3
0.118
2
0.079
15
0.591
9
0.354
6

Product Literature

Naam / Omschrijving Taal
Data sheet
German
English
HBMshop Bekijk de prijzen, beschikbaarheid en creër direct een offerte.
Offerte!

Vraag uw HBM Sales Engineer

Stuur mij:


Begin met uw aanvraag

Vraag uw HBM Sales Engineer

Stuur mij:


Begin met uw aanvraag

Uw aanbieding

Gratis technisch consultant

Snelle respons van onze gekwalificeerde sales engineer