Pre-wired Strain Gauges: Fast, Safe and Convenient to Use

Leave the soldering to HBM and avoid a potential source of error by ordering pre-wired strain gauges. HBM has set up a “fast lane” service for small orders, which helps provide you the strain gauge you need with the cable of required length within only 4 days.

HBM strain gauges comply with current RoHS requirements, and new materials have been used in making the stranded connection wires more flexible and easier to use. The temperature range has also been expanded to 150°C.

Advantages

  • Fast installation
  • Increased reliability
  • Fluoropolymer-insulated stranded wire (with non-stick properties)
  • Temperature compensation for most materials
  • Cable length from 0.5 m to 10 m (RJ11 connectors upon request)
  • Grid length from 0.6 mm to 10 mm  
  • Gauges with 3- and 4-wire configurations

Use the webshop configurator to set up your prewired gauge

Configurable pre-wired strain gauges

 

Ordering number:
K-CLY4x

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Preferred types

Measuring grid

Carrier

[Ω]

a

b

c

d

 

K-CLY4x-0.6/120#

120

0.6
0.024

1.1
0.043

6
0.236

4
0.157

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

K-CLY4x-1.5/120

120

1.5
0.059

1.2
0.047

7
0.276

4
0.157

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-3/120

120

3
0.118

1.2
0.047

8
0.315

5
0.197

 1
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-6/120

120

6
0.236

2.7
0.106

13.9
0.547

5.9
0.232

 1,3
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-10/12012010
0.394
4.9
0.193
18
0.709
8
0.315
 1
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-20/12012020
0.787
0.5
0.02
31.8
1.252
8.2
0.323
 1
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-50/12012050
1.969
0.8
0.031
63.6
2.504
8.2
0.323
 1
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-100/120120

100
3.937

1
0.039

114.8
4.52

8.2
0.323

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-150/120120150
5.906
1.2
0.047
165.6
6.52
8.2
0.323
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-1.5/350#3501.5
0.059
2.3
0.091
9.2
0.362
5.9
0.232
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-3/3503503
0.118
2.5
0.098
10.9
0.429
5.9
0.232
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-6/3503506
0.236
2.8
0.11
13.9
0.547
5.9
0.232
 1
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-10/35035010
0.394
5
0.197
18
0.709
8
0.315
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-3/7007003
0.118
2.7
0.106
10.9
0.429
5.9
0.232
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-6/7007006
0.236
4.1
0.161
13.9
0.547
5.9
0.232
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-10/70070010
0.394
5
0.197
18
0.709
8
0.315
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-3/1000#10003
0.118
2.7
0.106
10.9
0.429
5.9
0.232
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-6/100010006
0.236
4.2
0.165
13.9
0.547
5.9
0.232
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY4x-10/1000100010
0.394
5
0.197
18
0.709
8
0.315
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

 

Ordering number:
K-CLY9x

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Preferred types

Measuring grid

Carrier

[Ω]

a      

b

c

d

 

K-CLY9x-1.5/120_E

120

1,5

2

6,6 

  
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

K-CLY9x-3/120_E

120

 3

 2

 7

 6,3

 1
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY9x-6/120_E

120

 6

 4

 9,5

 9,5

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY9x-1.5/350_E

350

 1,5

 2

 6,6

 4,7

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY9x-3/350_E350

 3

 2

 7

 6,3

 1
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CLY9x-6/350_E350

 6

 3,8

 9,5

 9,5

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

 


 

Ordering number:
K-CXY3x

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Preferred types

Measuring grid

Carrier

[Ω]

a

b

c

d

 

K-CXY3x-0.6/120#

120

0.6
0.024

1
0.039

7
0.276
6
0.236
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

K-CXY3x-1.5/120

120

1.5
0.059

1.6
0.063
8
0.315
6.3
0.248
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CXY3x-3/120

120

3
0.118

3.2
0.126

10.5
0.413
8
0.315
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CXY3x-6/120

120

6
0.236

6.3
0.248
17.5
0.689
12
0.472
 1
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CXY3x-1.5/350#3501.5
0.059
1.7
0.067
7.7
0.303
6.3
0.248
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CXY3x-3/3503503
0.118
3.3
0.13
10.9
0.429
7.6
0.299
 1
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CXY3x-6/3503506
0.236
6.5
0.256
18
0.709
12
0.472
 3
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

 


 

Ordering number:
K-CXY4x​​​​​​​

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Preferred types

Measuring grid

Carrier

[Ω]

a

b1

b2

c

d

 

K-CXY4x-3/120

120

3
0.118

3
0.118

5.4
0.213

11
0.433

8
0.315

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

K-CXY4x-6/120

120

6
0.236

6
0.236

10.2
0.402

16
0.63

12.2
0.48

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CXY4x-3/350

350

3
0.118

4.2
0.165

5.6
0.221

11
0.433

8
0.315

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CXY4x-6/350

350

6
0.236

6
0.236

10
0.394

16
0.63

12.2
0.48

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CXY4x-3/7007003
0.118
4.2
0.165
5.6
0.221
11
0.433
8
0.315
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CXY4x-6/7007006
0.236
6.1
0.24
9.9
0.39
16
0.63
12.2
0.48
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

 


 

Ordering number:
K-CDY4x​​​​​​​

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Preferred types

Measuring grid

Carrier

[Ω]

a

b

c

d

 

K-CDY4x-3/120

120

3
0.118

2.7
0.106

8.2
0.323

8
0.315

 -
 Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
 K-CDY4x-6/120

120

6
0.236

3.2
0.126

10.7
0.421

9
0.354

 -
 Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
 K-CDY4x-3/3503503
0.118
2.7
0.106
8.2
0.323
8
0.315
 -
 Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
 K-CDY4x-6/3503506
0.236
3.2
0.126
10.7
0.421
9
0.354
 1
 Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

 


 

Ordering number:
K-CRY8x

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Preferred types

Measuring grid

Carrier

[Ω]

a

b

c

d

 

K-CRY8x-0.6/120#

120

0.6
0.024

1.2
0.047

4.8
0.189

8.7
0.343

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

K-CRY8x-1.5/120

120

1.5
0.059

1.3
0.051

8.2
0.323

14.6
0.575

 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CRY8x-3/120

120

3
0.118

1.1
0.043

9.7
0.382

14.6
0.575

 1
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CRY8x-6/120

120

6
0.236

3
0.118

13
0.512

22.9
0.902

 1,3
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CRY8x-1.5/350#3501.5
0.059
1.6
0.063
8.2
0.323
14.6
0.575
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CRY8x-3/3503503
0.118
1.2
0.047
9.7
0.382
14.6
0.575
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)
K-CRY8x-6/3503506
0.236
2.8
0.11
13.1
0.516
22.9
0.902
 -
Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

 

 

Ordering number:
K-CRY6x

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Preferred types

Measuring grid

Carrier

[Ω]

a

b

c

d

 

K-CRY6x-1.5/120K#

120

1.5
0.059

0.8
0.031

7.2
0.283

10.2
0.402

 -
 Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

K-CRY6x-1.5/120R#

120

1.5
0.059

0.8
0.031

8
0.315

13.5
0.531

 -
 Steel (1) | Aluminum (3) | Austenitic Steel (5) | Silica / Composite (6) | Titanium (7) | Plastic (8) | Molybdenum (9)

 

Standardized pre-wired strain gauges

Order selected strain gauges as standardized pre-wired models directly from stock and benefit from short delivery times. The gauges come with 50 mm preattached fluoropolymer-insulated wires, further options with 3 m connection cable will follow.


 

Ordering number:

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Measuring grid

Carrier

[Ω]

a

b

c

d

 

1-CLY41-3/120ZE

120

3
0.118
2.5
0.098
10.9
0.429
5.9
0.232
 
 Steel (1)
 1-CLY41-3/350ZE

350

3
0.118
2.5
0.098
10.9
0.429
5.9
0.232
 
 Steel (1)
 1-CLY41-6/120ZE1206
0.236
2.8
0.110
13.9
0.547
5.9
0.232
 
 Steel (1) 
 1-CLY41-6/350ZE3506
0.236
2.7
0.106
13.9
0.547
5.9
0.232
 
 Steel (1) 
     
 

Ordering number

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Measuring grid

Carrier

Ω

a

b

c

d

 

1-CLY91-3/350ZE

350

3
0.118
2
0.079
7
0.276
6.3
0.248
 
 Steel (1) 

                                                                                                                                                                                                                                                                                                                                                                                                                           

     
           
        

Ordering number

            

Nominal (rated) resistance       

            

Dimensions [mm/inch]        

Solder terminals are not required

Measuring grid  

Carrier 

    

Ω

 

a  

 

b

         

c       

            

d     

             

1-CDY41-3/350ZE

            

350 

6
0.236
3.2
0.126
10.7
0.429
9
0.354
 
 Steel (1)
     
 

Ordering number

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Measuring grid

Carrier

Ω

a

b

c

d

 

1-CXY31-3/350ZE

350

3
0.118
3.3
0.165
10.9
0.429
7.6
0.299
 
 Steel (1)
     
 

Ordering number

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Measuring grid

Carrier

Ω

a

b1

b2

c

d

 

1-CXY41-3/350ZE

350

3
0.118
4.2
0.165
5.6
0.220
11
0.433
8
0.315
 
 Steel (1)
     
 

Ordering number

Nominal (rated) resistance

Dimensions [mm/inch]

Solder terminals are not required

Measuring grid

Carrier

Ω

a

b

c

d

 

1-CRY81-3/350ZE

350

3
0.118

1.2
0.047
9.7
0.382
14.6
0.575
 
 Steel (1)

Product Literature

Naam / OmschrijvingTaal
Data sheet
German
English
Russian
Declaration of Conformity
German, English

Related Products

LY - linear
Linear strain gauges with 1 measurement grid is the first choice for strain measurements in only one direction.
XY T rosette
HBM XY strain gauges of the T rosettes type have 2 measuring grids arranged at a 90° degree offset from each other.
XY2 / XY4 - torsion
Types XY2 and XY4 are V-shaped strain gauges (SGs) with 2 measuring grids arranged at an angle of about 45° to the SG axis.

Recommended for you

Load Cells [kg]
HBM is the Global Market Leader in Load Cells and Sensors for Load Measurement. Thousands of customers worldwide rely on HBM Load Cells.
Rekstrookjes en accessoires
HBM strain gauges (stress gauges) for all strain measurement applications: Experimental stress analysis, durability testing, transducer manufacturing.
Strain Gages for Stress Analysis
The universal series for strain measurements: More than 2,000 different types of strain gauges available for nearly any measurement task.
Experimentele Spanningsananalyse
In tal van HBM Academy seminars en workshops leer je hoe je rekstroken installeren - stap voor stap, tot in detail uitgelegd door onze bevoegde trainers.
Wind Turbine Monitoring
Gain real insight into you wind turbine by monitoring it through HBM high quality measurement systems plus professional on-site installation.
Configuring optical strain sensors
Learn how to accurately configure an optical strain sensors chain from HBM FiberSensing for a successful installation.
HBMshop Bekijk de prijzen, beschikbaarheid en creër direct een offerte.
Offerte!

Vraag uw HBM Sales Engineer

Stuur mij:


Begin met uw aanvraag

Vraag uw HBM Sales Engineer

Stuur mij:


Begin met uw aanvraag

Uw aanbieding

Gratis technisch consultant

Snelle respons van onze gekwalificeerde sales engineer