MC2A / MC3 - Amplificadores de medição para transdutores indutivos e resistivos

It has two main purposes:

The measuring converter provides a supply voltage for the inductive half bridge
The signal from the connected transducer is converted into a proportional DC signal.
A pair of precision resistors connected to the Wheatstone bridge completes the inductive half bridge arrangement. The generator provides a symmetrical bridge excitation voltage of 1.8V (effective value) with a carrier frequency of 5 kHz.

The measuring converter type MC3 is used with strain gages in a full bridge circuit or with strain gage transducers to construct an uncomplicated and economical measuring system.

Suitable indicating equipments for connection to this system include digital indicators for switchboard installation. The MC3 supplies the bridge supply voltage of the transducer, amplifies the transducer output signal and outputs a DC voltage signal of -5V... 0 ... +5V proportional to the measured value.

A limit switch with open collector output can be adjusted over the range of 0 ... +5V.

When equipped with an optional final stage, an output current of 4mA ... 20 mA is available.

Key Features

  • Attractively priced carrier frequency amplifier for inductive and resistive transducers
  • Two switchable measuring ranges
  • Integral limit value switch
  • Easy operation and installation
  • Dustproof and hoseproof housing
  • Option: +4...+20mA output stage

Product Literature

Título / Descrição Idioma
Data Sheets
Manuais de Operação
English, German, French
English, German, French
EU Declaration of Conformity
Multi idiomas
Multi idiomas
HBMshop Veja preços, disponibilidade e obtenha uma cotação.
Peça um Orçamento Contate nossos Vendedores.