This is a collection of technical application reports for typical requirements around PMX.
They show a step-by-step solution up to the running project in PMX.
Available languages: german, English and French.

• PMX with Codesys and Codesys WebVisualisation
• PMX as CANmaster and CANslave (read/write CAN messages)
• PMX with IEPE-sensors, T40 torque-sensors, Piezoelectrical-sensors
• Read sensor signals via CAN, e.g. torque/speed (T12), temperature, climate
• PMX with calculated channels:
  • Event-counter, X-borders, tolerance-band, tolerance-windows, result-force
  • Mechanical work, stress-analysis
  • Combined Triggeroutput
  • 6x6 Matrix-compensation (noise reduction for Multi-Component sensors)
  • PID-regulator, PT100-measurement
  • Torsional Vibration with T40/T12/T10 and CASMA-filter
• PMX integration in a PC-network (Windows or Linux)
  • Using the PMX dotNET-API
  • Using the PMX command-set under LabView
  • Using PMX together with catman for DAQ and Cloud and PowerBI applications
• PMX integration in an automation-network
  • EtherCat and TwinCAT(Beckhoff)
  • ProfiNet (Isonchronus-Real-Time (IRT) and Simatic-manager (TIA-portal, Siemens)
  • Ethernet/IP and RSLogix (Rockwell Automation)
• PMX NTP-synchronisation with QuantumX
• PMX with internal Dats-Storage or on USB-Stick
• PMX with internal Object-Dictionary and device-to-device communication

Legal notice: The examples given are intended to illustrate the solution and integration into PMX.
The examples do not imply any warranty or guarantee.

Data: 11/2021  |  Versão: 1.7  |  Tamanho: 289 MB