P8AP Pressure Transducer: Available in Six Nominal (Rated) Pressure Options Ranging up to 500 Bar

The P8AP pressure transducer precisely measures liquid and gas pressures up to 500 bar with an accuracy class of 0.3. It is equipped with HBM’s high-grade strain-gauge technology and ideally suited for dynamic and static measurement tasks, for instance, in hydraulic test benches or hydraulic systems of construction and agricultural machinery. The 500-bar version has been certified in accordance with OIML R60 D0.3 and has thus been approved for use as a diaphragm load cell in legal-for-trade applications. Examples of such applications include weighing the material in an excavator bucket or determining the weight on a forklift fork.

The P8AP reliably withstands overloads of up to 1.75 times its nominal (rated) pressure owing to its robust and corrosion-resistant steel measuring body. It can be permanently used in many different industrial environments due to its IP67 degree of protection. The pressure transducer offers extreme temperature stability. The high-temperature version, which is also available, provides precisely measured data at temperatures of up to +140°C. The P8AP is available with six nominal (rated) measuring ranges with different cable lengths and various pressure connectors. It is the right solution for many industrial pressure measurements.

  • Accuracy class: 0.3
  • Nominal (rated) pressure: 500 bar
  • Degree of protection: IP67

High measurement accuracy

  • Accurate measurement attributed to an accuracy class of 0.3
  • Cable length compensation owing to 6-wire technology
  • Suitable for static and dynamic measurements owing to HBM’s high-grade strain-gauge technology
  • The 500-bar nominal (rated) pressure range version has been certified in accordance with OIML R60

Precise measurement due to proven strain-gauge technology and an accuracy class of 0.3

Sturdy design

  • Robust steel measuring body
  • Withstands loads of up to 1.75 its nominal (rated) pressure
  • Resistant to permanent humidity and dirt due to its IP67 degree of protection
  • Broad operating temperature range ranging from –40 °C to +80 °C

Long-term stability owing to the corrosion-resistant steel measuring body

Many variants

  • Six nominal (rated) pressure ranges are available, as follows: 10 bar, 20 bar, 50 bar, 100 bar, 200 bar, and 500 bar
  • A high-temperature version for temperatures of up to +140°C is optionally available
  • Many pressure connectors are available: M10x1; M20x1,5; G1/4 Form B; G1/2 Form B NPT1/4; G1/4 Form Z; M8x1,25; Tubus DA-10
  • Different connection configurations: 1.5 m (HT version), 5 m, 20 m cable, or with HS6P connector (HT version)

Versatile use facilitated by many connector options and the high-temperature version

P8AP Product Literature

Titel / BeskrivningSpråk
Data Sheets
Mounting Instructions
French, English, German, Spanish, Italian
English, German
Declaration of Conformity

Related Products

Pressure Calibration
HBM can help to ensure the quality of measurement results with our pressure sensor and transducer calibration.
QuantumX MX840B
Our QuantumX universal amplifier modules are real all-rounders. Simply connect the sensors of your choice to each of the connections, and off you go!
MGCplus - Laboratory & Test Stand DAQ
Det ultimalta, skalbara och konfigurerbara systemet för mätdatainsamling DAQ för användning i labb och provbänk.
Benefit from the new generation of data acquisition software. catman bundles highly efficient modules for many different measurement tasks.
HBMshop Se priser, tillgänglighet och skriv ut prisinformation.
Begär en offert!

Fråga din försäljningsingenjör

Skicka mig:

Starta din förfrågan

Fråga din försäljningsingenjör

Skicka mig:

Starta din förfrågan

Individuellt erbjudande

Teknisk rådgivning

Snabb återkoppling