LE11: Strain Gauge for Moist and Chemical Environments

The LE11 is an encapsulated strain gauge with an IP67 degree of protection (in compliance with the chemical resistance of the adhesives). A 1-meter-long stranded connection wire with fluoropolymer insulation is included in the scope of supply. The LE11 strain gauge is encapsulated in a special plastic material and is, therefore, moisture proof and resistant against chemicals (with the exception of highly concentrated acids such as sulfuric or nitric acid). The LE11 comes with a 2-wire or 4-wire connection. The nominal (rated) resistance is 350 ohms and the temperature response is adapted for steel.

High degree of protection

  • IP67 protection
  • Full encapsulation in special plastic material

Moisture proof and resistant against chemicals

Signal stability

  • Encapsulation with stranded wire
  • Stainless steel
  • Measuring grids: 3 mm

Excellent zero signal stability with changing moisture.

Highly resistive

  • 1 m stranded connection wire with Fluoropolymer insulation
  • 2-wire or 4-wire circuit alternatively

Wire material is resistant against environmental threats and electrical leakage.

LE11 Technical Features


 

Ordering number

Nominal (rated) resistance

Dimensions [mm/inch]

Maximum Excitation Voltage 

Measuring grid

Carrier

Ω

a

b

c

d

  

1-LE11-3/350ZE 
(2-wire circuit)

350

3
0.118
2
0.079
15
0.591
9
0.354
6

1-LE11-3/350VE
(4-wire circuit)

350

3
0.118
2
0.079
15
0.591
9
0.354
6

Product Literature

Titel / BeskrivningSpråk
Data Sheets
German
English
Russian
Declaration of Conformity
German, English

Recommended for you

Strain Gauge Services
Would you like to benefit from strain gauge measurements, but not have to perform them yourself? Let us handle complete measurement projects for you!
QuantumX MX1615B
The strain gauge amplifier for measuring all mechanical sizes: For all sensors using full-bridge, half-bridge or quarter-bridge configuration.
Töjningsgivare Tillbehör
Våra tillbehör för trådtöjningsgivare kompletterar vårt utbud och gör att vi kan erbjuda allt du behöver för en bra applicering av töjningsgivare.
Seminarier och kurser
HBM erbjuder kurser och seminarier inom mätteknik oavsett om du är nybörjare eller har flera års erfarenhet.
HBMshop Se priser, tillgänglighet och skriv ut prisinformation.
Begär en offert!

Fråga din försäljningsingenjör

Skicka mig:


Starta din förfrågan

Fråga din försäljningsingenjör

Skicka mig:


Starta din förfrågan

Individuellt erbjudande

Teknisk rådgivning

Snabb återkoppling