Data Recorder GEN3i and Transient Recorder
GEN3i is a powerful and fast data recorder. It offers both continuous direct-to-disk with up to 200 MB/s as well as fast transient recording.
The portable GEN3i data recorder offers a virtually unlimited range of application possibilities. It is ideal for mobile use thanks to its compact dimensions, whether it is troubleshooting, maintenance, or commissioning of generators, turbines, or engines. It is also the right instrument for use in the laboratory, in power test stands, or destructive material testing. Benefit from:
With GEN3i, you gain total control of your measurement data. You can access all data handling functions with a single touch of the large, intuitive touchscreen. The GUI is simple and easy to understand. GEN3i enables you to start measuring immediately.
To begin recording, just press the START button. To end it, press STOP. Data recording is that easy with GEN3i!
You can shift through your data to inspect or to find areas of interest by just touching the trace and dragging it in any direction.
Do you want to closely scrutinize a specific section of your recorded data? The GEN3i data recorder gives you an expanded view of your data, in any scale you want. Simply mark an area of interest with your finger on the touchscreen to zoom in.
To review multiple datasets, the necessary recording controls are easily accessible: Start/Stop and Next/Previous. You can playback your data at multiple speeds in forward or reverse modes.
|Titel / Beskrivning||Språk||Produkter||Språk||Typ av innehåll|
|GEN series GEN3i - Data Sheet||English|
|1kV data acquisition card - Brochure||French|
|1kV data acquisition card - Brochure||Korean|
|1kV data acquisition card - Brochure||Portuguese|
|1kV data acquisition card - Brochure||Spanish|
|1kV data acquisition card - Brochure||Simplified Chinese|
|1kV data acquisition card - Brochure||Italian|
|1kV data acquisition card - Brochure||Japanese|
|1kV Datenerfassungskarte - Broschüre||German|
|eDrive testing - Brochure||Italian|
|eDrive testing - Brochure||Chinese|
|eDrive testing - Brochure||Japanese|
|eDrive testing - Brochure||French|
|eDrive Testing - Brochure||English|
|eDrive Testing - Brochure||English (US)|
|eDrive Testing - Brochure||Japanese|
|eDrive Testing - Broschüre||German|
|GEN3i - Brochure||Spanish|
|GEN3i - Brochure||Portuguese|
|GEN3i - Brochure||English|
|GEN3i - Brochure||Simplified Chinese|
|GEN3i - Brochure||Japanese|
|GEN3i - Brochure||French|
|GEN3i - Brochure||Russian|
|GEN3i - Broschüre||German|
|Genesis High Speed - Brochure||Portuguese|
|Genesis High Speed - Brochure (US)||English (US)|
|Genesis HighSpeed - Brochure||English|
|Genesis HighSpeed - Broschüre||German|
|7600 Isolated Digitizer GEN series - User Manual||English|
|GEN3i - User Manual||English|
|HV Impulse Attenuator - User Manual||English|
|Instrument Panel Software - User Manual||English|
|Isolated Digitizer GEN series - User Manual||English|
|GEN series G070A - Data Sheet||English|
|GEN series G072 - Data Sheet||English|
|HV Impulse Attenuator - Data Sheet||English|
|Declaration of Conformity|
|1-KAB, K-KAB (cable)- EU Declaration of Conformity||Flerspråkig|
|GEN series - EU-Försäkran om Överensstämmelse||Flerspråkig|
|Calibration and Verification Software Version 2.98 GEN series - User Manual||English|
|GEN series Calibration Kit - Data Sheet||English|
GEN3i/GEN7i Update Package
The GEN3i/GEN7i Cumulative Update Package contains a new version of the RTS IEEE1588 PTP driver and also adds device drivers for new Genesis Highspeed devices.
Datum: 11/2017 | Version: 7 | Storlek: 130 MB
Perception Software 64-bit
Perception Enterprise (1-PERC-E64) is no longer required to run the 64-bit version of Perception. Therefore all Perception versions are available in 64-bit.
This 64-bit version of Perception includes "Full install", "Offline install" and "Free viewer install" - each installation with own set of features.
The Free viewer version of Perception software can be used free of charge.
Please note: Perception now includes the instruments firmware. That means it no longer requires an additional download of the firmware for the GEN DAQ systems.
Storlek: 398 MB
PNRF Reader Toolkit 32/64-bit
Software programming tool to read the proprietary PNRF (Perception Native Recording File) file format.
Storlek: 7 MB