eDAQXR-lite Data Acquisition System: Compact, Rugged, Mobile Data Acquisition System

The eDAQXR-lite is the go anywhere, test anything compact version of the eDAQXR. It is engineered using the same technology as the eDAQlite and eDAQXR and has similar leading-edge signal conditioning and a capacity to perform a broad range of on-board data processing, triggering, intelligent data storage, and complex computations.

Not every test utilizes hundreds of channels. Tests can be accomplished with both small and high channel counts using a single family of products. There is no learning curve, new software, or file formats; and eDAQXR and eDAQXR-lite systems can be seamlessly networked together.

The compact eDAQXR-lite can be installed inconspicuously to collect data under discrete conditions; for example, behind a dashboard panel.

Rugged

  • Temperature range: -20 to 65℃ 
  • IP57 degree of protection
  • Vibration proof up to  10g
  • Shock proof up to 75g
  • 8-36 volt input power range

 

Easy to Use

  • Intelligent data storage; collects relevant measurement data in condensed manageable form
  • Expansion layers / modules to create powerful data acquisition systems
  • Browser based software (no software installation) with import/export from Excel

Flexible

  • eDAQXR-lite is compatible to eDAQXR and can be combined with the SomatXR modules
  • 4-32 analog channels centralized, can be networked or externally expanded
  • Smaller foot print than the eDAQXR

Typical Applications

Recreational Vehicles and Automotive

  • Compact to easily fit in vehicles
  • CAN and GPS are built into the base processor
  • Product durability testing
  • Mobile acquisition of load mechanical components on bad road surfaces (RLDA testing)

Agriculture, Construction Machinery and Mining

  • Complete vehicle, or component structural testing
  • Easily distributed for large vehicles
  • Shock tested to withstand the harshest of environments
  • Road Load Data Acquisition (RLDA) and high-end fleet monitoring

Railroad Testing

  • Distributed measurements on passenger and freight trains – simultaneous sampling
  • Mobile data acquisition in rail transport such as test and acceptance runs
  • Shock tested to survive rail environments
  • Long distance sync between systems using GPS 

Somat eDAQXR EXRLCPU

The EXRLCPU is the processor for the stand-alone mobile data acquisition system and is considered the workhorse for the eDAQXR platform. Data from various inputs are stored onboard and can be downloaded after the test is completed. Tests may include minutes or even days of data while running long term vehicle tests. The system can either be disconnected from the PC while the test is running, remain connected via an Ethernet cable, or via WiFi to monitor channels in real-time. The powerful onboard processor can perform real-time calculations and provide powerful real-time displays of channels like strip charts, digital, FFT, XY, and much more. The system can even send text messages or emails if a fault condition is encountered.

The eDAQXRL supports the existing eDAQ-LITE expansion layers, with the exception of the ELCOM layer.  CAN and GPS ports are built into the new CPU layer, minimizing the overall system size.  The eDAQXRL can also support a distributed architecture when incorporating HBM SomatXR modules. The setup software resides on the processor, so setup can be easily done using a web browser such as Chrome.

  • 64GB memory
  • -40-80 degree C operating temp
  • Dedicated Linux operating system for reliable performance
  • 2 CAN ports supporting unlimited messages
  • GPS port – 5Hz or 200Hz option
  • 2 digital inputs, 3 digital outputs
  • 1 expansion ports for networking many systems, or connecting remote SomatXR modules
  • Supports up to 8 eDAQXR-lite layers. 
  • 4 to 32 Analog channels in a centralized system.  Mixed input types supported with XRLHLS and Somat SmartModules
  • External expansion using SomatXR signal conditioning modules (link to SomatXR)
  • Plug and play networking with the eDAQXR and eDAQXR-lite system to easily expand analog channel counts and provide additional CAN inputs

 

EXRHLS

  • 4 channel simultaneously sampled inputsors
  • Sample rates from .1Hz to 25kHz set per channel. (100kHz possible)
  • Analog input up to +/- 74.9V
  • With use of smart modules
    • Strain gauge input ¼, ½, full bridge 350 ohm, or 120 ohm
    • Universal thermocouple module. Software select: K, J, T, E
    • IEPE conditioning module
  • Analog and digital filtering per channel

 HBMshop


EXRLBRG

  • 4 channel simultaneously sampled inputs
  • Sample rates from .1Hz to 25kHz set per channel. (100kHz possible)
  • Strain gauge input ¼, ½, full bridge 350 ohm, or 120 ohm
  • Analog and digital filtering per channel
  • Supports both amplified and unamplified transducers, including strain gauges, accelerometers, pressure transducers, load cells, and other general analog signals

HBMshop


EXRLDIO

  • Digital Input/Output layer that can measure digital inputs/outputs, pulse counters, quadrature encoders
  • Offers 12 channels that can be used as digital inputs/outputs with 4 additional channels for wide-range inputs
  • Integrated in the digital channels are 6 configurable pulse counters

HBMshop


EXRLNTB

  • 16 channel Non-isolated thermocouple layer
  • 16 channels share a common cold junction for 0.5 deg. C relative temperature measurements – excellent for measuring thermal gradients
  • Cold Junction Thermocouple Boxes (ECJTB) are required for the thermocouple termination
  • Supports K, J, T, E with the same external cold junction box (or ‘with a matching external junction box?)

HBMshop

 

 

SomatXR MX1609KB-R/TB-R: Ultra-rugged DAQ modules for temperature measurement (with type K or type T thermocouples)

  • The specialists for temperature measurement
  • Individual devices for type K and type T thermocouples
  • 16 channels with automatic sensor identification (RFID)

Learn more HBMshop 

 

 


 

SomatXR MX1615B-R: Ultra-rugged specialized DAQ module for measurements with strain gauges and SG-based sensors

 

  • Ideal for experimental stress analysis, structural and load testing
  • For use with strain gauges and SG-based sensors (half and full bridge)
  • 16 channels with automatic sensor identification

Learn more HBMshop

 

 

 


 

SomatXR MX1601B-R: Ultra-rugged DAQ module for measurements with active sensors

 

  • Supports all electrical and active sensors
  • For sensors with current and voltage output incl. IEPE (e.g. acceleration sensors)
  • 16 channels with automatic sensor identification

Learn more HBMshop

 


SomatXR MX840B-R for all sensor types and measurands: Ultra-rugged universal DAQ module

 

  • Ideal with frequently changing measurement tasks
  • Identifies all measured quantities and sensor types
  • Highly future proof
  • 8 universal channels with automatic sensor identification

Learn more HBMshop

 

 


SomatXR MX471B-R: Ultra-rugged DAQ module for CANbus acquisition

 

  • CAN interfaces for acquiring vehicle data
  • Inputs for CANbus, including support of CCP or xCP-on-CAN
  • 4 channels that can be configured with a dbc file

Learn more HBMshop

 

All modules can be individually combined with each other.

EGPS-200 Precision Receiver

EGPS-200 Precision GPS Receiver is engineered for non-contact speed measurements in professional vehicle testing applications such as brake testing and acceleration, as well as general vehicle dynamics.

Product No.: EGPS-200

 

 

 

Learn more HBMshop


Somat 15-Volt Power Supply

The Somat E-AC/15 Power Supply (1-E-AC/15-2) is designed to provide 15 volts DC from a standard 120-volt AC input to a SoMat eDAQ or eDAQlite system.

HBMshop

 

 

 

 


Somat eDisplay

The Somat eDISPLAY is a rugged, weather tight LCD display that provides an operator real-time testing feedback.

Not CE compliant.

Product No.: 1-E-DISPLAY-2

HBMshop

 

 


Digital I/O Transducer Cable

The Somat SAC-EDIO Digital I/O Cable is a high-quality, pre-molded cord set with tinned pigtail wires for transducer wiring.

Product No.: 1-SAC-EDIO-2

HBMshop

 

 

 


eDAQ Communications Cable, Ethernet Hub

The Somat eDAQ Communications Cable, Ethernet Hub is a high-quality, pre-molded cord set with an RJ-45 connector for an Ethernet HUB connection.

Product No.: 1-SAC-ESR9/XO-2

HBMshop

 

 

 


 

eDAQ Communications Cable, Ethernet Hub (Serial)

The Somat eDAQ Communications Cable, Ethernet Hub (Serial) is a high-quality, pre-molded cord set with an RJ-45 connector for the Ethernet HUB connection and a 9-pin D-Sub for the serial.

Product No.: 1-SAC-ESR9/HUB-2

HBMshop

 

 

 

 

 


eDAQ Communications Cable, Ethernet X/O

 The Somat eDAQ Communications Cable, Ethernet Hub X/O is a high-quality, pre-molded cord set with an RJ-45 connector for an Ethernet X/O connection.

Product No.: 1-E-ETHERNET-X/O-2

HBMshop

 

 

 

 

 


eDAQ Communications Cable, Ethernet X/O (Serial)


The Somat eDAQ Communications Cable, Ethernet X/O (Serial) is a high-quality, pre-molded set with an RJ-45 connector for the Eternet X/O connection and a 9-pin D-Sub for the serial.

Product No.: 1-SAC-ESR9/XO-2

HBMshop

 

 

 


eDAQ Networking Adapter Cable, Ethernet Hub

The Somat eDAQ Networking Cable (1-SAC-ESYNCADAPT-2) is a high-quality, pre-molded cord set with an RJ-45 connector for an Ethernet Hub connection; and (2) networking sync cables.

HBMshop

 

 

 

 

 

 


 

eDAQ Networking Sync Cable (2 m)

The Somat eDAQ Networking Sync Cable (SAC-ESYNC) is a high-quality, pre-molded cord set with (2) Lemo OB Male Connectors.

HBMshop

 

 

 

 

 

 

 


eDAQ Systems Power Cable

The Somat SAC-EPWR15 eDAQ Systems Power Cable (SAC-EPWR15) is a high-quality, pre-molded cord set with tinned pigtail wires.

HBMshop