Industrial Electronics (digiCLIP, DT85) Industrial Electronics (digiCLIP, DT85) | HBM

Product Literature Archive

digiCLIP

題目/描述語言
Data Sheets
digiCLIP DF30DN - Prospetto dati Italian
Brochures
digiCLIP - Brochure English
digiCLIP - Broschüre German
Declaration of Conformity
1-KAB, K-KAB (cable) - EU Declaration of Conformity 多語言
digiCLIP - EU Declaration of Conformity 多語言
Device Descriptions
digiCLIP EDS files (CAN) for DF30CAN and DF31CAN

EDS files for digiCLIP DF30CAN and DF31CAN.

Date: 06/2014  |  Version: 1.36 / 1.20  |  Size: 13 KB

多語言
digiCLIP EDS files (DeviceNet) for DF30DN and DF31DN

EDS files for digiCLIP DF30DN and DF31DN.

Date: 05/2015  |  Version: 1.12  |  Size: 25 KB

多語言
Software
digiCLIP Assistant

digiCLIP Assistant, Firmware Loader and USB Driver (for Windows XP, Windows Vista and Windows 7/8/10) for easy setup of digiCLIP modules and for visualization.

For smooth operation of modules with CAN and DeviceNet interfaces, use the PEAK USB-to-CAN dongle.

For Profibus operation Hilscher and Siemens CP5511/12 and CP5711 is supported - to handle digiCLIP firmware-updates via CP5711 digiCLIP-modules have to be equipped with a adapted bootloader which is implemented starting with following serial-numbers: (DF30DP: 816711801 / DF31DP: 817427801).

All required drivers are included and will be installed during startup.

Date: 04/2016  |  Version: 2.6.5  |  Size: 77 MB
Related Documents: Release Notes

多語言
digiCLIP CAE data for Eplan Electric P8

This project is a macro-project and contains CAE data for Eplan Electric P8.

Date: 08/2011  |  Version: 1.00  |  Size: 42 MB

多語言
digiCLIP DTM setup for DF30DP and DF31DP

Contains the installation of the DeviceDTM in German and English for Windows 2000/XP/Vista/7/8/10 operating systems.

Prerequisite for using digiCLIP DTM setup is the installation of a frame application (e.g. FDT container, PACTware) - not included in this download.

Date: 12/2010  |  Version: 1.2.0.166  |  Size: 13 MB
Related Documents: Release Notes

多語言
digiCLIP Example DeviceNet Project (Omron PLC)

The CX-Integrator example program shows the basic test setup of a digiCLIP DF31DN connected to an Omron Sysmac CJ1M SPS with a CS1/CJ1 DRM21 fieldbus controller. In this example, consistent (coherent) data is read and written over the DeviceNet. The DF30DN operating manual provides all possible commands and values. This example does not imply any warranty or guarantee.

Date: 07/2015  |  Size: 763 KB

多語言
digiCLIP Example on a CANOpen application

This applicatin is to describe an example of a small-scale digiCLIP amplifier application in a CAN network using a CANopen based PLC. In this application, load cells implemented as strain gage full bridges are used for determining the filling level in a tank and taring it to 0 ... 100% using a PLC connected to the digiCLIP. This example does not imply any warranty or guarantee.

Date: 07/2015  |  Size: 1 MB

多語言
digiCLIP Example Profibus Project

This example considers a simple test assembly including a Siemens CPU313-2DP and a DF30DP/DF31DP (digiclip). In this example, consistent (coherent) data are written and read via the Profibus with SFC14 and SFC15. As an additonal programming the parametercontainer is programmed to configure the DF30DP in the cyclic data exchange. To read configurations with DPV1 the Siemens function block SFB52 (PNO AK1131)is programmed, too. All commands and values for the configuration are shown in the official manual.

Legal notice: The example given is intended to illustrate the integration of the DF30DP into Siemens' Step7 software via Profibus. This example does not imply any warranty or guarantee.

Date: 07/2015  |  Size: 7 MB

多語言
digiCLIP Firmware for DF30 and DF31

Archive including all current firmware files for modules of the digiCLIP series. The appropriate firmware loader is part of the digiCLIP assistant. The zip file has to be extracted into the digiCLIP assistant download directory.

DF30CAN version 1.44
DF31CAN version 1.28

DF30DP version 1.42
DF31DP version 1.28

DF30DN version 1.12
DF31DN version 1.12

Date: 05/2015  |  Size: 555 KB
Related Documents: Release Notes

多語言
GSD/GSE files for digiCLIP DF30 and DF31

GSE/GSD files for digiCLIP DF30DP and DF31DP.

Date: 12/2012  |  Version: 1.34  |  Size: 3 KB

多語言
Tech Notes
TechNote - FDT/DTM Application

This is an instruction for creating a FDT (Field Device Technology) project with the fdtCONTAINER which connects a Profibus digiCLIP (DF31DP) with a PC via an Ethernet gateway (THxEPI2).

German
TechNote - FDT/DTM Application

This is an instruction for creating a FDT (Field Device Technology) project with the fdtCONTAINER which connects a Profibus digiCLIP (DF31DP) with a PC via an Ethernet gateway (THxEPI2).

English

DT85

題目/描述語言
Data Sheets
DT85 - Data Sheet English
DT85 - Datenblatt German
DT85 - Prospetto dati Italian
Operating Manuals
DT85 - Operating Manual English, German
TD85 - Operating Manual Italian
Declaration of Conformity
DT85 - EU Declaration of Conformity English, German, French