QuantumX MX410B QuantumX MX410B | HBM

Precise Results

  • An A/D converter with a very high resolution (24-bit) which facilitates synchronous and parallel measurement
  • Noise suppression
  • Optional low-pass filter (Bessel and Butterworth) from 0.1 to 20,000 Hz
  • AutoCal routines allow for compensation of 100% of the cable lengths, as well as of the temperature
  • Real-time computation of Peak and RMS

Exact results thanks to high resolution and noise reduction

Fast integration

  • Safe and fast integration due to electrically isolated inputs
  • Easy transducer installation owing to TEDS
  • Freely scalable through the use of additional distributed or centralized QuantumX modules
  • Four analog real-time outputs with 16-bit resolution and low latency

Easy integration and high scalability as a module of the QuantumX series

Universal use

  • Four inputs that can be individually configured
  • Up to six transducer types can be connected per channel
  • Compatible with the following transducer types: Strain gauges in half- and full-bridge configurations (DC or carrier frequency), piezo-resistive full bridges, inductive half- and full bridges, as well as voltage, current, and IEPE (ICP)
  • Advanced catman analysis software
  • Easy data transmission through Ethernet
  • Broad supply voltage range (DC) of 5 to 24 V that can be configured for each channel

Universal measurement solution with comprehensive selection of transducers and powerful analysis software

無論你需要 更新你的現存系統 或需要緊湊的單機系統: MX410 QuantumX 模組都是你的最佳選擇. 4通道的放大器 尤其適合於採集和分析動態機械過程,如變速箱震動,活塞的應變和碰撞試驗的動態力 - MX410B 的每個通道都支援六種感測器技術.

和 QuantumX 家族的其他成員一樣, MX410B 具有快速,通用,高精度並具有極高的可靠性.

HBM catman: More than just data acquisition

catman data acquisition software simplifies the acquisition, visualization and analysis of your measurement data.

Learn  more

Also available as ruggedized version

  •  SomatXR MX411B-R: Ultra-rugged universal data acquisition module for highly dynamic measurement tasks. 

 

Download the CAD step files for this product!
QuantumX MX410B CAD step files
QuantumX MX410B Accessories CAD step files

採樣速度高達 96 kHz/通道

MX410B 採樣速率高達 96 kHz/通道 ,精度為 24 bits. 可以滿足高動態力以及加速度測量的應用要求. 無論是應變感測器, IEPE 還是電感式感測器 - 每個 MX410B 通道都可以進行連接,並且空間要求更小. 其還可以進行電壓,電流等測量,可以與所有的通用感測器進行連接..

單機使用或組成模組化系統

MX410B 可以單機使用,或者進行級聯,組成複雜的 模組化資料獲取系統. 另外, MX410B 尺寸小巧,更適合於空間狹小的應用環境.

APM 技術: 即插即測

同 QuantumX 家族的所有成員一樣, 其支持 APM 技術 (增強型即插即測 ) ,其可以自動識別 TEDS 感測器,提高測試效率. 測試結果具有極高的精度並且測試安裝極為方便,快速。可以連接所有的通用感測器是其最大的優勢: MX410B 可以連接半橋,全橋應變感測器,以及半橋,全橋電感式感測器以及壓電感測器(IEPE)等。

一個 乙太網和 FireWire 介面 用作通訊連接. 並可以提供數位和類比兩種測量信號. 因此 MX410B 可以非常容易地和各種不同的分析系統匹配.

通用性

汽車,航空航太,鐵路,造船,能源生產,機械工程,研發是 MX410B 應用領域的一部分,其廣泛地應用於大部分工業領域,具有極高的通用性.

QuantumX 測試鏈繼承了HBM 測試產品一貫的長期穩定性,並且可以升級,保護你的投資.

Product Literature

題目/描述語言
參數表
QuantumX MX410B - Data Sheet English
QuantumX MX410B - Datenblatt German
QuantumX MX410B - データシート Japanese
QuantumX MX410B - 數據表 Chinese
產品手冊
QuantumX - Brochure English
QuantumX - Brochure (US-Version) English (US)
QuantumX - Broschüre German
QuantumX - Folheto Portuguese
QuantumX - ブローシャー Japanese
QuantumX - 小冊 Chinese
操作手冊
HBM Common API - User Manual English
HBM LabVIEW Driver - User Manual English
QuantumX - Bedienungsanleitung German
QuantumX - Operating Manual English
QuantumX - 操作說明 Chinese
QuantumX - 設置マニュアル Japanese
QuantumX CANape Driver - Operating Manual English, German
QuantumX CANbus - Operating Manual English, German
附件
QuantumX / SomatXR - Uninterruptible Power Supply - Data Sheet English
QuantumX / SomatXR - Unterbrechungsfreie Stromversorgung - Datenblatt German
QuantumX Adapter BNC to SubHD15 (SUBHD15-BNC) - Information English, German
QuantumX BPX001/BPX002/BPX003 Backplane - Information English, German
QuantumX BPX002-SIDE Desktop-Kit – Information English, German
QuantumX case clips (CASECLIP) - Istruzioni di montaggio Italian
QuantumX case clips (CASECLIP) - Mounting Instructions English
QuantumX Portamoduli BPX001 - Informativa Italian
QuantumX SCM-HV - Quick Start Guide French, German, English
QuantumX SCM-SG120/350/700/1000 - Quarter Bridge Adapter English, German
驅動
HBM CANape Driver 32-bit

The driver allows you to integrate all QuantumX / SomatXR measurement modules in CANape 13.0, 14.0, 15.0 and 16.0.

Date: 06/2018  |  Version: 4.1.5  |  Size: 11 MB
Related Documents: Release Notes

多語言
HBM CANape Driver 64-bit

The driver allows you to integrate all QuantumX / SomatXR measurement modules in CANape 17.0 and 18.0.

Date: 01/2021  |  Version: 4.1.6  |  Size: 12 MB
Related Documents: Release Notes

多語言
HBM Common API 6.2

The HBM Common API enables users to develop their own PC software application, integrating DAQ systems like QuantumX, SomatXR, PMX and MGCplus.

The download includes the free of charge API as well as documentation and example programs in C#.

Date: 01/2022  |  Version: 6.2  |  Size: 28 MB
Related Documents: Release Notes

多語言
HBM DIAdem Driver

The driver allows to integrate QuantumX, SomatXR, PMX and MGCplus in DIAdem (32 and 64 Bit). Only available in German language. Please see the Release Note for further details and requirements. The download can be used 30 days as trial. To unlock the license, a license key must be purchased.

Date: 05/2020  |  Version: 1.2.1  |  Size: 66 MB
Related Documents: Release Notes

German
HBM LabVIEW Driver 32-bit

The driver allows to integrate QuantumX, SomatXR, PMX and MGCplus in LabVIEW. Please see the Release Notes for further details and requirements. The download can be used 30 days as trial. To unlock the license, a license key must be purchased.

Date: 02/2021  |  Version: 4.0  |  Size: 24 MB
Related Documents: Release Notes

多語言
HBM LabVIEW Driver 64-bit

The driver allows to integrate QuantumX, SomatXR, PMX and MGCplus in LabVIEW. Please see the Release Notes for further details and requirements. The download can be used 30 days as trial. To unlock the license, a license key must be purchased.

Date: 02/2021  |  Version: 4.0  |  Size: 24 MB
Related Documents: Release Notes

多語言
Declaration of Conformity
1-KAB, K-KAB (cable) - EU Declaration of Conformity 多語言
QuantumX - EU Declaration of Conformity 多語言
QuantumX - Product Type Pattern Approval Russia 2012 Russian
QuantumX - Product-Type Pattern Approval Russia 2017 Russian
固件
MX/CX-Module (B version and older)

Modules: all B type modules like MX840B/-R, MX471B/-R, … and CX27B (not for CX22B/-R-W, CX27C or MX471C/-R).

Necessary tools: MX Assistant or catman Easy/AP

Date: 07/2023  |  Version: 4.46.16.0  |  Size: 14 MB
Related Documents: Release Notes EN
Release Notes DE

多語言
軟體
catman Easy / AP / PostProcess

Software for data acquisition, visualization, analysis and reporting of measurement data for your PC or QuantumX/SomatXR Data Recorder.

Date: 09/2023  |  Version: 5.6.2  |  Size: 473 MB
Related Documents: Release Notes

多語言
HBM Device Manager

The HBM Device Manager is a service tool to scan the network for available HBM devices.

Date: 12/2019  |  Version: 2.0  |  Size: 7 MB
Related Documents: Release Notes

多語言
PROFINET GSDML File

GSDML file and picture for QuantumX / SomatXR CX27C Gateway

Date: 06/2018  |  Version: V2.33  |  Size: 5 KB

多語言
QuantumX / SomatXR System Package

Hint: Please unzip the package and then execute “start.exe” to install:

• MX Assistant

• HBM Device Manager

• All manuals, datasheets, step files, online help files, leaflets, etc.

Date: 07/2023  |  Version: 4.14.1  |  Size: 609 MB
Related Documents: Release Notes EN
Release Notes DE

多語言
Tech Notes
TECH NOTE - Analog to Digital Data Path in QuantumX Modules

This TECH NOTE describes in general the digitalization path in QuantumX data acquisition modules, explaining anti-aliasing filter, analog to digital conversion, digital filtering, scaling, datarate and distribution of data within the data acquisition system or to a data sink whether this is a storage medium or gateway.

多語言
TECH NOTE - IEEE1588:2008 Precision Time Protocol in Data Acquisition and Testing

This TECH NOTE explains the highly accurate time sync mechanism Precision Time Protocol or short PTP, its advantages and its use in Test & Measurement applications.

多語言
TECH NOTE - IEEE1588:2008 PTPv2-Switches and Grandmaster Clocks

This TECH NOTE shows available and tested PTP components together with HBM equipment and can be used as reference source giving you some recommendations.

多語言
TECH NOTE - Noise Analysis using QuantumX and catmanAP

This TECH NOTE shows the possibilities and potential in using one single solution for your projects acquiring all crucial quantities - mechanical, thermal, electrical, noise, visual and position over to data storage, analysis and reporting using QuantumX and catmanAP software.

English
TECH NOTE: Integrated Electronics Piezo-Electric Sensing (IEPE)

Sensors based on piezo-electric and with integrated electronics explained in detail. IEPE characterises a technical standard for piezoelectric sensors which contain built-in impedance conversion electronics with constant current supply. IEPE sensors are used to measure acceleration, acoustics, force or pressure.

多語言
TECH NOTE: Using WLAN in large scale measurement and telemetry applications

This Tech Note describes why WLAN is one of the most suitable wireless network technologies for large scale measurement and telemetry applications. It will show its potential, advantages and challenges, as well as how it’s already used in real life applications.

English
TN119_HBK_IEPE-Sensing.pdf

IEPE characterises a technical standard for piezoelectric sensors which contain built-in impedance conversion electronics with constant current supply. IEPE sensors are used to measure acceleration, acoustics, force or pressure.

English
HBMshop 查看價格、庫存並獲得報價