CAN Vehicle Bus Module
The Somat CAN Vehicle Bus Module (EVBM-CAN) conditions CAN vehicle network parameters to be synchronously measured by eDAQ and eDAQlite systems.
Somat ELDIO - Somat eDAQlite Digital Input/Output Layer
The Somat eDAQlite Digital Input/Output Layer (ELDIO) is an extremely versatile layer that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus and GPS. The ELDIO offers eight channels that can be used as digital inputs/outputs with four additional channels for wide-range inputs.
Integrated in the digital channels are six configurable pulse counters. One layer can also support up to two independent vehicle bus interfaces via the use of Vehicle Bus Smart Modules.
The GPS communications port is designed to work with Somat GPS devices.
Size: 6.9" W x 5.6" L x 0.7" H (18cm W x 14cm L x 2cm H)
Weight: 0.91lbs (0.42kg)
Temperature: -20° to 65° C
Connectors: (6) Somat M8 Female Bulkhead Connector
Digital Inputs/Outputs
Number of Inputs: 8
Voltage Ranges:Steady State: -0.2 to +45 VDC
Short-Term Transients: -0.4 to +100 VDCTransducer Power: 5V or 12V @1A
Threshold Voltage Accuracy: +/-20mV
Input-switching threshold voltages are programmableWide-Range Digital Inputs
Number of Inputs: 4
Voltage Ranges:Steady State: -45 to +45 VDC
Short-Term Transients: -100 to +100 VDCTransducer Power: 5V or 12V @1A
Threshold Voltage Accuracy: +/-20mV
Input-switching threshold voltages are programmablePulse Counters
Number of Inputs: 6
Pulse Counter Modes: Pulse Width Period, Pulse On Period, Pulse Rate and Quadrature Decoder
Pulse Rate & Quadrature: Count Rising Edge Pulses for Inputs to 1MHz. Maximum Pulse Rate is over 4 Billion
Pulse Width Period and Pulse on Period: Measured using s 5MHz clock (200 nSec resolution)
Min Frequency Measurement Possible: .0012 Hz
(3) Somat SAC-TRAN-MP-2 Transducer Cables (2 m)
The Somat GPS Receiver (EGPS-5HZ) is a commercial WAAS-enabled GPS receiver with a 5Hz update rate. The receiver continuously tracks and uses up to 12 satellites to compute and update position. Available channels include Latitude, Longitude, Altitude, Speed m/s, Speed MPH, Speed Knots, Heading, Year, Month, Day, Hour, Minute, Second, Nanosecond and Number of Satellites.
Part Number Code
The following number scheme is used to identify the layer configuration.
ELDIO - X
eDAQ Layer ELDIO
Options
B = Base Layer
5HZGPS = 5Hz GPS Receiver
The Somat CAN Vehicle Bus Module (EVBM-CAN) conditions CAN vehicle network parameters to be synchronously measured by eDAQ and eDAQlite systems.
The Somat GPS Receiver (EGPS-5HZ) is a commercial WAAS enabled GPS receiver with a 5 Hz update rate.
The Somat J1708 Vehicle Bus Module (EVBM-J1708) conditions J1708 vehicle network parameters to be synchronously measured by eDAQ and eDAQlite systems.
The Somat J1850 VPW Vehicle Bus Module (EVBM-VPW) conditions J1850 VPW vehicle network parameters to be synchronously measured by eDAQ and eDAQlite systems.
The SoMat Pulse Conditioning Module (EPCM) is ideal for magnetic pickup type transducers.
The Somat M8 Hex Nut Wrenches (HDW-0034-00) work with the Somat M8 transducer and extension cables for both the eDAQ and eDAQlite.
The Somat SAC-EXT-MF-0.4 Extension Cable (SAC-EXT-MF-0.4) is a high-quality 0.4 meter pre-molded cord et with Male/Female SoMat M8 connectors.
The Somat Extension Cable (SAC-EXT-MF-2) is a high-quality 2 meter pre-molded cord set with Male/Female Somat M8 connectors.
The Somat SAC-EXT-MF-5 Extension Cable (SAC-EXT-MF-5) is a high-quality 5 meter pre-molded cord set with Male/Female Somat M8 connectors.
The Somat SAC-EXT-MF-10 Extension Cable (SAC-EXT-MF-10) is a high-quality 10 meter pre-molded cord set with Male/Female Somat M8 connectors.
The Somat SAC-EXT-MF-15 Extension Cable (SAC-EXT-MF-15) is a high-quality 15 meter premolded cord set with Male/Female Somat M8 connectors.
The Somat Transducer Cable (SAC-TRAN MP-2) is a high-quality 2 meter pre-molded cord set with tinned pigtail wires for transducer wiring.
Click here to purchase SoMat cables and accessories online
The Somat Transducer Cable (SAC-TRAN-MP-10) is a high-quality 10 meter pre-molded cord set with tinned pigtail wires for transducer wiring.
The E-AC/15 is a high-quality 15 volt DC power supply that provides power to an eDAQ or eDAQlite from a standard 120/240 volt supply.