MP85A-S EASYswitch - 開關和鎖定系統的高效率測試

開關是世界上最簡單的控制單元. 在任何時候保證其正確的功能是非常關鍵的.

在生產複雜的高科技產品時,開關和鎖定系統能夠使生產更簡單且更可靠. 開關的品質因此非常重要.

MP85A-S EASYswitch 程序控制器 可以監控在生產過程中的開關 – 採用強大的數學功能進行評估,監控開關的特性.

與生產過程完美匹配

MP85A-S EASYswitch 分析典型的力-位移 和轉角曲線和電子開關點 – 和信號變化.

你可以立即獲得 OK/NOK 評估. 這在優化生產控制和減少停工時間方面是非常重要的。 警報可以對生產設備進行保護. EASYswitch 記錄所有的測量曲線 和結果 – 線上,可靠,及時.

內置的數位輸入可以同步檢查5個開關事件:

  • 在開關測試視窗中定位開關點或開關過程
  • 直接開關(中斷/連接)
  • 觸發力和力矩
  • 重複
  • 過程檢查的100%品質控制
  • 獲取和評估開關點和鎖定過程的強大數學功能
  • 通用的雙通道放大器
  • 結果,曲線和設定可在記憶體中存儲
  • 通過場匯流排界面整合到自動化系統中

測量轉換器 MC2A 組成電感式感測器的測量鏈主要有兩個目的:

  • 測量轉換器為電感半橋提供外部電壓
  • 感測器信號轉換成 直流信號.

一對 高精度電阻 連接到惠斯通電橋,組成電感半橋. 提供 1.8V,載頻為5 kHz 對稱橋路激勵電壓 .

測量轉換器 MC3 用於將應變計組成一個 全橋電路或和應變感測器組成一個經濟的測量系統.

MC3 為感測器提供橋路電壓, 放大感測器的輸出信號,並輸出一個直流電壓信號 -5V... 0 ... +5V.

限位元開關 可以調整輸出為 0 ... +5V.

通過可選設備,輸出電流可以調整為4mA ... 20 mA.

Integrated Process Data Management (IPM)

IPM interface for MP85A amplifiers

A free IPM process data management software interface is available for MP85A DP FASTpress and MP85A-S EASYswitch amplifiers. The interface enables recorded production data to be transmitted directly to a QS server for visualization and archiving; this makes production control more convenient.

IPM stands for Integrated Processdata Management and denotes a software that automatically captures physical process and measurement data and, in addition, provides reporting for production and quality assurance. Whether in production monitoring at production sites or in test benches - access to clearly presented data about productivity, down time and setup time as well as product and manufacturing quality saves costs; this has been proven by an ROI calculation (Return on investment).

Convenient and extensive data transmission

The IPM interface enables measured values and complete curves as well as up to 9 (evaluation) windows to be transmitted. IPM communicates both the overall status of the production process and the individual status of the respective evaluation window. The production process and utilization of capacities including down time can be analyzed in detail without the necessity of actually being on site at the assembly line or the press-fit system.

Measurement data in real time

Measurement data is provided in real time via the Web browser and permanently saved to the IPM database to comply with product liability requirements. In addition, IPM also monitors the captured process and measurement data in real time; this enables, for example, production defects to be easily detected. Whether by SMS or by email - staff in charge of production is automatically notified of any error message. Fast error logging enables the product quality to be increased; costs resulting from product recalls, on the other hand, are reduced.

Assuring quality and reducing costs - benefit from the advantages of the IPM interface!

Your benefits

  • Instant quality assessment
  • Reduced down time and costs
  • Fast error logging
  • Automatic notification
  • Integrated archiving

ePLAN: Electrical engineering and project planning made easy

In addition to the industrial amplifiers HBM provides the appropriate ePLAN macros. They allow easy and error-free integration of the instruments in the project planning of the automation environment.

ePLAN Electric P8 is an engineering tool for modern CAE software supported by a database and facilitates consistent project planning, documentation and administration of automation systems. ePLAN macros enable users to easily integrate the process controllers in their project planning. Parts data, drawings and pin assignments are available in ePLAN Electric P8 immediately after import of the macros.

The free macros are available on the documentation CD included in the process controllers' scope of supply and can also be downloaded here.

Software FASTpress Suite

FASTpress Suite – powered by HBM Industrial Software

The HMI software is part of the FASTpress software suite and works together with the process controllers of the FASTpress and EASYswitch families. It can also be adjusted and expanded country- and application-specifically.

Class Library (API)

The Framework Class Library (FCL) comprises several thousand classes divided into Namespaces. The classes perform tasks such as formatting text, sending e-mails, but also generating codes. Categorization into namespaces serves to arrange the large quantity of information more manageably. The manufacturer provides the documentation of classes with the software. All the functions of the HBM FASTpress and EASYswitch process controllers are combined in the API of the MP85A Toolkit. This makes all the implementation options for required device functions available to application programmers in their own application.

System Architecture

Process controllers of the FASTpress and EASYswitch series are used as hardware platform. Their physical connection to the host system on which the user's target application is running consists of the standardized Ethernet interface. The non-real-time TCP-IP protocol runs on this interface at 100 Mbit/s. With the MP85A Toolkit, HBM has created a tool that sets up and maintains the connection to the host system and also makes a library available from which the user can create a software application for the production process.

Availability and Tools

The manufacturer Microsoft offers .NET in various versions:

  • as a simple runtime environment together with the required class libraries (framework)
  • as a free SDK for developers
  • or sold as an integrated development environment (IDE) in the form of Microsoft Visual Studio .NET.

Especially for beginners and students, Microsoft Visual Studio Express Editions is available at no cost. It has restrictions compared to the expensive standard or professional versions. This makes it easy for both beginners and professional application programmers to get started. The HBM MP85A Toolkit also provides extensive help with numerous explanations and sample programs. These examples are available in the source code and can easily be adjusted and expanded.

Powerful production software – INDUSTRYmonitor

To make it possible to use the full performance of HBM process monitoring, a completely new user interface was created based on .NET technology. This tool is used to record process data, for visualization and to save data. In addition to the functions and information made available by the process controllers of the FASTpress and EASYswitch series, workpiece designations can also be read via bus interfaces (CAN, Profibus, Ethernet) or barcode scanners (USB). This information is displayed and saved and facilitates a clear overview and simple archiving of acquired process data. Up to 12 process controllers can be operated over the Ethernet network. Cycle times measured in seconds with display and storage of process data in the background can be implemented. This software can also be used on all target systems on which WindowsXP/7/8 is installed as the operating system.

Product Literature

題目/描述 語言
參數表
French
English
German
Italian
產品手冊
English
French
German
操作手冊
French
English
English
German
German
German
French
Italian
Italian
French
English
快速操作指南
Italian
English, German, French
附件
French
English
German
安全指南
Italian
English, German, French
EU Declaration of Conformity
多語言
軟體

This project is a macro-project and contains CAE data for Eplan Electric P8.


Date: 08/2011
Version: 1.00
Size: 19 MB
多語言

EDS files for PME (MP01, MP30, MP55, MP60, MP85).


Date: 11/2011
Version: 1.01
Size: 33 KB
多語言

PME assistant, firmware loader and USB driver (for Windows XP, Windows Vista and Windows 7/8/10) for comfortable setup and visualisation. For smooth operation of modules with CAN interfaces, use the PEAK USB-to-CAN dongle. All required drivers are included and will be installed during startup.

This download includes:

  • PME-Assistant (V3.4.206)
  • PME-Firmware Loader (V1.1.7)
  • IPM data conversion (V1.1)

... and the demo versions of:

  • EASYteach (V1.0.5.10)
  • MP85A-Toolkit (V1.0.5.12)
  • EASYmonitor CE (V1.1.1.1)
  • INDUSTRYmonitor (V1.2.1.10)

You can start those demo versions up to 25 times for free. To buy the full licence please visit the HBM shop or ask your local HBM representative.


Date: 07/2015
Version: 1.50
Size: 163 MB
Related Documents:
多語言

For PME hardware version 1.xx (MP01-MP70) and all MP85/DP! For newer devices, please use the PME firmware for hardware version 2.xx on this page. Archive including all current firmware files for modules of the PME series. The appropriate firmware loader is part of the PME assistant. The zip file has to be extracted into the PME assistant directory. It includes following firmware versions:

  • MP01 Version 1.12
  • MP30 Version 1.04
  • MP30DP Version 1.04
  • MP55 Version 1.42
  • MP55DP Version 1.42
  • MP55DPS6 Version 1.42
  • MP60 Version 1.18
  • MP60DP Version 1.18
  • MP70DP Version 1.05
  • MP70DPS7 Version 1.05
  • MP70S7 Version 1.05
  • MP85 Version 1.10
  • MP85DP Version 1.10

Date: 05/2007
Version: HW1
Size: 887 KB
多語言

For PME hardware version 2.xx (MP01-MP70) and all MP85A/ADP! For older devices, please use the PME firmware for hardware version 1.xx on this page. Archive including all current firmware files for modules of the PME series. The appropriate firmware loader is part of the PME assistant. The zip file has to be extracted into the PME assistant directory. It includes following firmware versions:

  • MP01 Version 2.00
  • MP30 Version 2.02
  • MP30DP Version 2.02
  • MP55 Version 2.06
  • MP55DP Version 2.06
  • MP55DPS6 Version 2.02
  • MP60 Version 2.00
  • MP60DP Version 2.00
  • MP70DP Version 2.00
  • MP70DPS7 Version 2.00
  • MP70S7 Version 2.00
  • MP85A Version 2.36
  • MP85ADP Version 2.36
  • MP85A-S Version 2.36
  • MP85ADP-S Version 2.36


Date: 07/2013
Version: HW2
Size: 2 MB
Related Documents:
多語言

Program example to the communication of the HBM process-controller MP85 with a Siemens Siemens CPU317-2 DP:
The example of the communication with the MP85A about Ethernet please unzip recursive in the ZIP archive (relatively stored paths). The program sends and receives data by means of the functions AG_send and AG_Recv (FC5 and FC6). It are sent 10 bytes to the SPS and 14 bytes should be received again. In this project the Siemens CPU317-2 DP has the IP address 172.21.64.250. The IP address of the MP85 is 172.21.64.253 (port 4020). A description with program-code and comments is shown in the documents „OP1_MP85A_Eth-Com-CPU317-2 DP.pdf “
Legal notice: The example given is intended to illustrate the integration of the MP85ADP(-S) into Siemens' Step7 software via Profibus. This example does not imply any warranty or guarantee.


Date: 07/2015
Size: 2 MB
多語言

Example-Sequence to read and write consitent data as well an example to read and write the workpiece-id via Profibus-DPV1 with Siematic Step7:
This basic example shows the transmission of measuring-value and Control-word (Float data format) from the MP85ADP(-S) via Provibus-DP interface to a master (e.g. Siemens PLC). Programming is done in Step7 Siemens software using the function blocks for reading (SFC14) and writing (SFC15) MP85ADP data. Further more the example contains reading and writing the workpiece-id via the Profibus DPV1-function using the function-blocks for reading (SFB52) und writing (SFB53) to MP85ADP(-S). A description with program-code and comments is shown in the documents „OB1_DPV1_Werkstueck_de.pdf“ and „OB1_DPV1_Werkstueck_en.pdf“.
Legal notice: The example given is intended to illustrate the integration of the MP85ADP(-S) into Siemens' Step7 software via Profibus. This example does not imply any warranty or guarantee.


Date: 07/2010
Size: 6 MB
多語言

PROFIBUS DP master file for PME: (MP30DP, MP55DP, MP60DP, MP70DP, MP70DPS7,MP85MP). German version: GSD file, English version: GSE file.


Date: 07/2013
Version: 1.20
Size: 30 KB
多語言

The basic sequence of transmission of measured value (Float data format) from the MP85ADP curve memory via the Profibus-DP interface to a master (e.g. Siemens PLC) is shown in this file.


Date: 07/2015
Size: 926 KB
多語言
HBMshop 查看價格、庫存並獲得報價
馬上獲取報價!

向HBM銷售工程師詢問

請發給我:


開始詢價

向HBM銷售工程師詢問

請發給我:


開始詢價

單獨出價

技術諮詢

快速回應