PACEline CMD PACEline CMD | HBM

PACEline CMD Digital Charge Amplifier: Measures Signals From 50 pC to 2 Million pC

The PACEline CMD digital charge amplifier for piezoelectric sensors precisely measures fast force, torque and pressure signals. It is ideally suited to highly dynamic applications such as production monitoring in press processes or end-of-line testing in the automotive sector due to its very wide measurement range and fast data acquisition up to 50 kHz. PACEline CMD can be easily integrated via digital or analog interface and parameterized via Ethernet as well as Software and Adjustment Assistant. 

  • HBM accuracy class: 0.5
  • Measurement ranges: between 50 pC and 2 million pC
  • Degrees of protection: up to IP 65

Wide measuring range

  • Very wide measurement range and high dynamics
  • Measurement range freely adjustable or via SensorTeach
  • Calibration certificate included in scope of supply
  • Guaranteed accuracy also in partial ranges

Can be used in many applications due to extremely wide, individually adjustable measurement range.

Easy to use

  • Direct data transfer via Ethernet interface or 10 V analog output
  • Digital and analog signal inputs and outputs, peak value detection
  • Integrated Assistant for time-saving sensor adjustment
  • 2 parameterizations enable formulations to be quickly changed
  • Parameterization software including chart recorder and data storage

Easy to program and use due to digital interfaces and software support.

Highly reliable

  • High signal quality with 14 bit resolution
  • Robust design featuring IP 60 and IP 65 degree of protection
  • Selectable high-pass filter minimize signal drift
  • Electrically isolated signal inputs and outputs prevent faultsFast data acquisition up to 50 kHz measurement frequency

High-quality measurement result due to robust design and high EMC interference protection

PACEline CMD Videos

 
 

CAD 圖紙

請下載 CAD 文件

Please note: The CAD download is handled by a third-party company which requires a separate user registration.

Available in 2 different versions

  • CMD600: For measuring ranges up to 600,000 pC
  • CMD2000: For measuring ranges up to 2,000,000 pC
  • Also available: ePlan macro, LabVIEW driver, API for programmers, software example projects, programming examples in Simatic Step7

    PACEline Accessories

Product Literature

題目/描述語言
參數表
CMD2000 - データシート Japanese
CMD600 - Prospetto dati Italian
CMD600 - データシート Japanese
PACEline CMD2000 - Data Sheet English
PACEline CMD2000 - Datenblatt German
PACEline CMD600 /-P - Data Sheet English
PACEline CMD600 /-P - Datenblatt German
PACEline CMD600/ CMD600P - Caractéristiques techniques French
PACEline DMD2000 - Caractéristiques techniques French
產品手冊
PACEline Piezo Technology - Brochure English
PACEline Piezotechnologie - Broschüre German
操作手冊
CMD600 - Manuale di istruzione Italian
CSB4/1 Summing Box - Operating Manual English, German, French, Italian
PACEline CMD - Interface Description English
PACEline CMD - Operating Manual French, German, English
附件
KAB143, KAB145, KAB176 (cables) - Data Sheet English
KAB143, KAB145, KAB176 (câbles) - Caractéristiques techniques French
KAB143, KAB145, KAB176 (cavi di collegamento) - Prospetto dati Italian
KAB143, KAB145, KAB176 (Kabel) - Datenblatt German
安全指南
PACEline CMD - Safety instructions French, German, English
Declaration of Conformity
1-KAB, K-KAB (cable) - EU Declaration of Conformity 多語言
CMD / CMA CE - EU Declaration of Conformity 多語言
固件
CMD Firmware

Archive including all current firmware for all modules of the CMD series (CMD600 and CMD2000).
Please use "CMD Firmware Updater for Version 3.62 and higher" on this page.

Date: 03/2016  |  Version: 3.74  |  Size: 248 KB
Related Documents: Release Notes

多語言
軟體
CMA/CMD CAE data for Eplan Electric P8

This project is a macro-project and contains CAE data for Eplan Electric P8.

Date: 10/2011  |  Version: 1.00  |  Size: 18 MB

多語言
CMD Assistant

CMD Assistant and Firmware Loader for Windows 2000, XP, Vista, 7/8/10. Allows the easy setup of CMD modules, visualization and process-data storage. All required drivers are included and will be installed during startup.

Starting with assistant-version 1.2.4.0 only CMD with firmware 3.0 and higher can be used. Devices with firmware 2.9 and lower are shown in the device-scan but marked red with a note for firmware-update. Please do also a firmware-update for those devices, for features see release-notes.

Date: 03/2016  |  Version: 1.3.0.2  |  Size: 66 MB
Related Documents: Release Notes

多語言
CMD LabView driver and example project

To simplify the use of CMD meauring amplifier a complete support for communication in form of a Labview driver is available, respectively Labview programs/subroutines called virtual instruments (VIs).
The purpose of this document is to explain in detail all aspects of the Labview CMD driver:

  • Driver structure
  • VI blocks
  • Application example – getting started

The CMD driver is completely written in Labview Professional Development System. In order to use the drivers the user will need Labview version 9.0.1 or later.
This example does not imply any warranty or guarantee.

Date: 07/2015  |  Size: 3 MB

多語言
CMD Siemens Profinet integation example project

This is an instruction for using a CMD charge amplifier with a Siemens 1200 controller in a Profinet network.

It shows how to stream data via UDP from the charge amplifier to the controller via UDP with up to 1000 Hz and send a command via TCP.

This non-real-time communication can be performed simultaneously to an existing real-time ProfiNet connection over the same line.

Communication is done with program blocks, which are enclosed with the technote in the .scl file.

 

HBM does not guarantee the completeness and correctness of this example.

 

Date: 07/2019  |  Size: 1 MB

多語言
HBMshop 查看價格、庫存並獲得報價