C Series CrNi Foil Strain Gauges for Measurements at Extreme Temperatures
Series C strain gauges (SGs) with 1 or 2 measuring grids are specially designed for use at extreme temperatures (-269 °C to +250 °C) and provide an adapted temperature response in the range from -200 °C to +250 °C. Series C strain gauges also feature flexible use and are therefore easy to work with.
Types LC1 and LC6 are linear strain gauges for strain measurements in one direction.
Type XC1 is a 0°/90° rosette for analyzing biaxial stress states with known principal strain direction.
Type RC1 is a 0°/45°/90° rosette for analyzing a biaxial stress state with unknown principal strain direction.
Series C strain gauges are available in nominal (rated) resistances of 120 and 350 ohms with different temperature responses adapted for steel or to customer specification.
The measuring grid consists of a special CrNi alloy; the material of the measuring grid carrier is polyimide.
- The specialist for extreme temperatures (-269...+250°C)
- Temperature response with matching in the range of -200...+250°C
- Flexible, therefore easy to handle
- Material: Polyamide
- Measuring grids: 1, 2, 3
- Resistance (Ohm): 120, 350
|Dehnungsmessstreifen - Broschüre||German|
|Strain Gauges - Brochure||English|
|Hinweise zur Installation von DMS - Anwendungstipps||German|
|Practical Hints for the Installation of Strain Gauges - Instructions for use||English|