LD20: Strain Gauge for High Strain or Compression up to 10 %

The use of the strain gauge LD20 is recommended wherever an extremely high strain or compression can occur (>5 %). The LD20 has a maximum elongation of +/- 100,000 µm/m (+/-10 %) and is attached with 30 mm leads.

Note: In terms of fatigue life, the LD20 exhibits a lower resistance to alternating loads than standard Y series strain gauges.

Maximum Elongation

  • Maximum elongation of +/- 100,000 µm/m (+/-10 %).

Well suited for high strain rate measurements

Easy to Install

  • Simple installation process and easy handling 

Extremely flexible, as the Y Series universal strain gauges

 

LD20 Technical Features

 Ordering numberNominal (rated) resistanceDimensions [mm/inch]Maximum Excitation Voltage Solder terminals
Measuring gridCarrier
Ωabcd
 1-LD20-6/1201206
0.236
2.8
0.11
13
0.512
6
0.236
8LS7
1-LD20-10/12012010
0.394
4.6
0.181
18.5
0.728
9.5
0.374
13LS5
1-LD20-6/3503506
0.236
2.8
0.11
13
0.512
6
0.236
13LS7
1-LD20-10/35035010
0.394
5
0.197
18.5
0.728
9.5
0.374
23LS5

Measurement of High Strains With LD20 and X120

Our application report explains how to install strain gauges in the way that high strain can be measured.

Read now


Product Literature

HBMshop 查看價格、庫存並獲得報價
馬上獲取報價!

向HBM銷售工程師詢問

請發給我:


開始詢價

向HBM銷售工程師詢問

請發給我:


開始詢價

Green check mark 單獨出價

Green check mark 技術諮詢

Green check mark 快速回應