Do you want to analyze highly dynamic systems and get the maximum out of your measurement? Then SomatXR MX411B-R is the right amplifier for you. MX411B-R has four channels with a maximum sample rate of 100 kS/s per channel, which increases to 200 kS/s in two-channel mode.  That makes the amplifier ideally suited for highly dynamic acquisition and analysis of mechanical measurement quantities.

The following transducer technologies are supported by SomatXR MX411B-R:

  • Voltage (±10V)
  • Standardized current (±20 mA)
  • Full-bridge or half-bridge circuit strain gauges
  • Inductive full and half bridges, LVDT
  • Current-fed piezoelectric transducers (IEPE, ICP®)
  • Piezoresistive full bridges

Sample rates of up to 100 kS/s per channel combined with a high resolution of 24-bit – MX411B-R guarantees maximum accuracy. This fully and reliably meets the requirements for acquisition of highly dynamic forces and accelerations in harsh environments.

Typical fields of application

    • Mobile measurements and tests with off-highway vehicles (construction, agriculture and forestry)
    • Stationary measurements and tests on infrastructures, e.g. buildings
    • Field tests in harsh environments

    Your benefits

    • Reliable measurement results even in harsh environments
    • Reduced wiring effort due to use of distributed modules
    • Digitization close to the sensor results in higher measurement quality

     

    Flexible, modular and expandable

    SomatXR modules can also be used in combination with other data acquisition systems (e.g. QuantumX). In just a few simple steps you can put together a highly individualized data acquisition system scaled to your specific needs. The modules communicate via Ethernet TCP/IP and are synchronized using IEEE 1588 (PTPv2). 

    Professional software support

    SomatXR users benefit from a powerful software package. Every measurement module can be connected to the PC and  catman measurement software via Ethernet. The ultra rugged CX22B-R data recorder allows stand-alone use in the field without a PC. This ensures that the data is easy to acquire, clearly visualized and smartly analyzed.

    Highly precise and reliable

    Reliable and dependable measurement results require the calibration of transducers, amplifiers, or complete measurement chains.

    • Working standard calibration certificate according to ISO 10012 stored in the SomatXR module
    • DAkkS certificate (ISO 17025) from HBM on request
    Download the CAD step files for this product!
    SomatXR MX411B-R CAD step files
    SomatXR MX411B-R Accessories CAD step files

    Product Literature

    題目/描述語言
    參數表
    English
    Japanese
    German
    產品手冊
    English
    German
    操作手冊
    English
    English
    English
    Japanese
    Chinese
    German
    快速操作指南
    English, German, Spanish, French, Italian, Portuguese, Chinese, Japanese, Korean
    附件
    English
    German
    English
    English, German
    English, German
    English
    English, German
    English
    English, German
    English, German
    English
    English
    German
    安全指南
    English, German
    Declaration of Conformity
    多語言
    多語言
    Tech Notes
    English

    Sensors based on piezo-electric and with integrated electronics explained in detail. IEPE characterises a technical standard for piezoelectric sensors which contain built-in impedance conversion electronics with constant current supply. IEPE sensors are used to measure acceleration, acoustics, force or pressure.

    多語言

    IEPE characterises a technical standard for piezoelectric sensors which contain built-in impedance conversion electronics with constant current supply. IEPE sensors are used to measure acceleration, acoustics, force or pressure.

    English

    Related Pages

    HBMshop 查看價格、庫存並獲得報價
    馬上獲取報價!

    向HBM銷售工程師詢問

    請發給我:


    開始詢價

    向HBM銷售工程師詢問

    請發給我:


    開始詢價

    Green check mark 單獨出價

    Green check mark 技術諮詢

    Green check mark 快速回應