T40FH: Measure High Torque with Precise Torque Flange

The T40FH torque sensor is first choice for measuring extremely high torque. It improves productivity and efficiency when measuring high torque - also for applications that have as yet required the use of very costly special equipment. 

The rotating version of the T40FH, is the ideal solution for power test benches for ship’s main engines or tests in the offshore industry. Through its integrated electronics in the rotating version, it is easy to use and offers fast measurement results. The non-rotating version of the T40FH torque flange is suitable for calibration tasks in particular.

Nominal (rated) torque values ranging from 100 kN·m through to 300 kN·m are covered, the maximum permissible rotational speed of the rotating version depends on the model and ranges from 2,000 rpm through to 3,000 rpm. As an option, an integrated magnetic rotational speed measuring system with 72/86 pulses per revolution is available.

Your Benefits

  • Cost-effective and maintenance-free: T40FH comes without bearings or slip rings
  • Easy to use: the rotating version features integrated electronics, easy control and fast measurement results
  • Reliable: based on proven T40 torque transducer family

Key Features

  • Nominal (rated) torque: 100 kN·m, 125 kN·m, 150 kN·m, 200 kN·m, 250 kN·m, 300 kN·m
  • Nominal (rated) rotational speed: from 2,000 to 3,000 rpm
  • Available in rotating and non-rotating versions
  • Without bearings or slip rings
  • Short design
  • Optional magnetic speed measuring system with 72/86 pulses per rotation depending on measuring range

Recommended for you

T40B with Rotational Speed Measuring System and Reference
HBM's torque transducer T40B combines a rotational speed measuring system and reference pulse in a single measurement flange.
Using the CASMA Filter for Torque Measurements - Tips & Tricks
In this article you will learn how to apply the CASMA filter in HBM's TIM-PN, TIM-EC and PMX signal conditioning systems.
Power Measurement on Large Drives with Combustion Engines
Power measurement on large drives with combustion engines
參考書
Rainer Schicker 和 Georg Wegener 博士在 272 頁 的著作中對扭矩感測器的使用做了經典的陳述.描述了扭矩測量的基本原理以及如何設計和應用扭矩感測器（採用應變技術).
Which fit is the right one?
Correct torque application to the transducer is crucial for measuring torque. It is the only way to obtain precise and reliable measurement results.
Torque measurement in wind turbines
This article clearly shows how important torque measurement in wind turbines was years ago and still is today.
扭矩測量
由 Rainer Schicker 和 Georg Wegener 所著的 "正確測量扭矩" 一書是全球扭矩測量的權威著作。我們現在為您提供免費下載. 其中包括: 扭矩感測器的設計，應用和安裝振動過程分析扭矩感測器標定免費下載
Couplings and mounting parts for torque applications
Couplings are an important accessory for torque transducers. This article provides you with important information on which factors you should consider when choosing the coupling that best fits your application.
APL: test bench
The independent test bench service provider APL has over 70 state-of-the-art motor and component test benches, and relies on HBM measurement technology.
Linearization of Torque Transducers Using the TIM-EC EtherCAT Interface Module
The relationship between a torque transducer's input and output quantities is not linear. The characteristic curve needs to be approximated.
Measuring Torque with PMX
Read this article to learn more about the advantages the amplifier PMX offers in test benches especially regarding torque measurement.
New, Highly Flexible TIM-EC EtherCAT Interface Concept
Torque measurement technology that is applied in the automotive industry needs to be compatible with fieldbus based systems.
21 Tips on How to Install a Torque Sensor
In this paper, you’ll learn installation tips for torque sensors: Arrival, driveline design, mechanical installation, cabling, electrical setup.
Connecting Torque Transducers to EtherCAT Systems - using T
In this article you learn more about the advantages of the TIM-EC torque interface module for the connection of torque sensors to EtherCAT systems.
How to Select a Rotating Torque Sensor
There are two key reasons for taking the time to carefully select a torque sensor: to prevent damage and ensure accuracy.
TIM-EC with Intercommunication Mode and Coupler Functionality
The intercommunication mode and the coupler functionality make the TIM-EC torque interface module more flexible.
BCSA: High Speed Torque Application
Case Study about an innovative application by the French company BCSA that uses HBM technology.
Exploring the Technical Terms of Torque Measurement
This article will explore some of the technical terms used in torque measurement, such as nominal torque, maximum torque, limit torque and breaking torque.
The Importance of Torque Measurements
Torque measurements are vital for the machine building industry, but this measurement is also relevant in some other applications.
Accelerated Optimization & Analysis For Electrical Machines
Accelerated Optimization & Advanced Analysis For Electrical Machines and Drives - with eDrive Testing from HBM
Shuikou dam: Ship lifts
Reliable, stable and robust: HBM torque sensors have worked well in Shuikou dam ship lifts for more than 10 years.
One spring element for all cases
Variable torque tests in different measuring ranges - with the T12HP torque transducer from HBM
Gas Compressor Set Control
This article explains different methods for permanently controlling the propulsion power in mechanically driven gas compressor sets.
HBMshop 查看價格、庫存並獲得報價
馬上獲取報價！

向HBM銷售工程師詢問

請發給我：


開始詢價

向HBM銷售工程師詢問

請發給我：


開始詢價

單獨出價

技術諮詢

快速回應